Hands-on AWS VPC Labs: Essential Lab Exercises
Hands-on AWS VPC Labs: Essential Lab Exercises
.MP4, AVC, 1280x720, 30 fps | English, AAC, 2 Ch | 3h 46m | 784 MB
Instructor: Richard Crisci
.MP4, AVC, 1280x720, 30 fps | English, AAC, 2 Ch | 3h 46m | 784 MB
Instructor: Richard Crisci
The Sneak Peek program provides early access to Pearson video products and is exclusively available to subscribers. Content for titles in this program is made available throughout the development cycle, so products may not be complete, edited, or finalized, including video post-production editing.
Introduction
Hands-on AWS VPC Labs: Introduction
Lesson 1: Review the Default VPC
Learning objectives
1.1 Analyze the Basic Settings of the Default VPC
1.2 Route Tables, Subnets, and Network ACLs
1.3 Delete and Re-Create the Default VPC
1.4 Hands-on Lab 1: Default VPC
Lesson 2: Create a VPC
Learning objectives
2.1 Understand VPC and CIDR Range
2.2 Create Public and Private Subnets
2.3 Create and Attach an Internet Gateway
2.4 Hands-on Lab 2: Create a VPC, Subnets, and Internet Gateway
Lesson 3: Public Subnets
Learning objectives
3.1 Configure a Route Table for a Public Subnet
3.2 Create Web Servers in a Public Subnet
3.3 Hands-On Lab 3: Configure Route Tables and a Web Server
3.4 Create a NAT Gateway
3.5 Configure a Route Table for a Private Subnet
3.6 Hands-on Lab 4: Create a NAT Gateway
Lesson 4: VPC Peering
Learning objectives
4.1 Create an Additional VPC
4.2 Configure a VPC Peering Connection
4.3 Configure Route Tables for VPC Peering
4.4 Hands-on Lab 5: VPC Peering
Lesson 5: Transit GatewayLearning objectives
Learning objectives
5.1 Create a Transit Gateway
5.2 Create a Transit Gateway Attachment
5.3 Configure Route Tables for a Transit Gateway
5.4 Perform Clean Up Tasks
5.5 Hands-on Lab 6: Transit Gateway
Lesson 6: VPC Endpoints and Load Balancers
Learning objectives
6.1 Create a Gateway VPC Endpoint for S3
6.2 Examine Route Table Entries for S3 Traffic
6.3 Hands-on Lab 7: VPC Endpoints
6.4 Configure a Network Load Balancer and Target Group
6.5 Verify Load Balancer Operation
6.6 Hands-on Lab 8: Create a Network Load Balancer
Lesson 7: Use PrivateLink to Allow Communication between VPCs
Learning objectives
7.1 Create an Internal Network Load Balancer
7.2 Register an Endpoint Service
7.3 Set up the Customer Connection to the Endpoint Service
7.4 Connect from an Instance in the Customer VPC
7.5 Hands-on Lab 9: PrivateLink
Lesson 8: Monitor Traffic with VPC Flow Logs
Learning objectives
8.1 Create a Custom IAM Policy and Role
8.2 Create a CloudWatch Log Group
8.3 Enable Flow Logs on Your VPC
8.4 Examine the Resulting Flow Logs
8.5 Hands-on Lab 10: VPC Flow Logs
Lesson 9: Secure Traffic Using VPNs
Learning objectives
9.1 Create the Customer Gateway and the Virtual Private Gateway
9.2 Create Site-to-Site VPN Configuration
9.3 View Configuration Details for On-Premises Customer Gateway (CGW)
9.4 Hands-on Lab 11: VPN Configuration
9.5 Clean up your AWS Account to Avoid Charges
Summary
Hands-on AWS VPC Labs: Summary
Hands-on AWS VPC Labs: Introduction
Lesson 1: Review the Default VPC
Learning objectives
1.1 Analyze the Basic Settings of the Default VPC
1.2 Route Tables, Subnets, and Network ACLs
1.3 Delete and Re-Create the Default VPC
1.4 Hands-on Lab 1: Default VPC
Lesson 2: Create a VPC
Learning objectives
2.1 Understand VPC and CIDR Range
2.2 Create Public and Private Subnets
2.3 Create and Attach an Internet Gateway
2.4 Hands-on Lab 2: Create a VPC, Subnets, and Internet Gateway
Lesson 3: Public Subnets
Learning objectives
3.1 Configure a Route Table for a Public Subnet
3.2 Create Web Servers in a Public Subnet
3.3 Hands-On Lab 3: Configure Route Tables and a Web Server
3.4 Create a NAT Gateway
3.5 Configure a Route Table for a Private Subnet
3.6 Hands-on Lab 4: Create a NAT Gateway
Lesson 4: VPC Peering
Learning objectives
4.1 Create an Additional VPC
4.2 Configure a VPC Peering Connection
4.3 Configure Route Tables for VPC Peering
4.4 Hands-on Lab 5: VPC Peering
Lesson 5: Transit GatewayLearning objectives
Learning objectives
5.1 Create a Transit Gateway
5.2 Create a Transit Gateway Attachment
5.3 Configure Route Tables for a Transit Gateway
5.4 Perform Clean Up Tasks
5.5 Hands-on Lab 6: Transit Gateway
Lesson 6: VPC Endpoints and Load Balancers
Learning objectives
6.1 Create a Gateway VPC Endpoint for S3
6.2 Examine Route Table Entries for S3 Traffic
6.3 Hands-on Lab 7: VPC Endpoints
6.4 Configure a Network Load Balancer and Target Group
6.5 Verify Load Balancer Operation
6.6 Hands-on Lab 8: Create a Network Load Balancer
Lesson 7: Use PrivateLink to Allow Communication between VPCs
Learning objectives
7.1 Create an Internal Network Load Balancer
7.2 Register an Endpoint Service
7.3 Set up the Customer Connection to the Endpoint Service
7.4 Connect from an Instance in the Customer VPC
7.5 Hands-on Lab 9: PrivateLink
Lesson 8: Monitor Traffic with VPC Flow Logs
Learning objectives
8.1 Create a Custom IAM Policy and Role
8.2 Create a CloudWatch Log Group
8.3 Enable Flow Logs on Your VPC
8.4 Examine the Resulting Flow Logs
8.5 Hands-on Lab 10: VPC Flow Logs
Lesson 9: Secure Traffic Using VPNs
Learning objectives
9.1 Create the Customer Gateway and the Virtual Private Gateway
9.2 Create Site-to-Site VPN Configuration
9.3 View Configuration Details for On-Premises Customer Gateway (CGW)
9.4 Hands-on Lab 11: VPN Configuration
9.5 Clean up your AWS Account to Avoid Charges
Summary
Hands-on AWS VPC Labs: Summary
Hands-on AWS VPC Labs: Essential Lab Exercises
