Electric Vehicle Charging Installations & Voltage Drop

| A.C. & D.C charging stations | Connectors | Design Voltage Drop - Impact on Power Network |

What you'll learn:
Practical resolved problems. Tests.
Electric Vehicle/Cars charging modes according to IEC 61851-1; SAE J1772 ;
Chademo (AA), CCS1/Combo1 (EE), CCS2/Combo2 (FF), GB/T (BB) according to IEC 62196-3 ;
Type 1, Type 2 (Mennekes plug), Type 3 according to IEC 62196-2 ;
Voltage drop impact to the Electrical Distribution Network.

Requirements:
For first part: This course starts from basic – step by step. Basic knowledge of physics.
For other parts: Have a basic Electrical Engineering knowledge.

Description:
Part 1
Standardization and interoperability in e-mobility.
International Electrotechnical Commission (IEC)
The International Telecommunication Union (ITU)
International Organization for Standardization (ISO)
European & US standardization
IEC 61851-1 / EN 61851-1 -Electric vehicle conductive charging system. Part 1: General requirements
EV charging modes
EV charging levels. SAE J1772
This course is for those who wants to understand Electric Vehicle/Car conductive charging system and its plugs, socket-outlets, vehicle connectors and vehicle inlets in order to chose the right EV and its charging station;
After this course you will know and understand all connectors and vehicle inlets and its configurations (pin, sleeve etc.).
You will learn about:
A.C. charging. Plugs, socket-outlets, vehicle connectors and vehicle inlets;
D.C. charging. Plugs, socket-outlets, vehicle connectors and vehicle inlets.
You will learn the basic about the main International and European standards and law:
The IEC 61851- Electric vehicle conductive charging system ;
The IEC 62196- Plugs, socket-outlets, vehicle connectors and vehicle inlets — Conductivecharging of electric vehicles ;
Configuration: AA, BB, CC, DD, EE, FF. Chademo, CCS1, CCS2, GB/T, Combo 1, Combo 2.

Part2. Advanced.
Alternative voltage definition
Voltage Drop in radial electric network supplied by one load
Problems
Voltage Drop in radial electric network supplied by more concentrated loads along the line
Impact of the Integration of the EV charging stations in the electrical distribution network
BS 7671.Voltage drop calculation.
Correction factors for operating temperature and load power factor

Who this course is for:
Anyone interested in this topic who wants to find a job.
Power system/Electrical design engineer.
MEP Consultants, Sales consultant.
Passion to Learn.

More Info