ABS & Traction Control System Diagnostic

ABS Module & Sensors Practical Diagnostic Course

What you'll learn
You will learn the operation of brake assist systems including ABS, TCS, ESP and more.
You will learn to identify all components on ABS & Traction control system.
You will learn to diagnose passive and active sensors.
You will learn to read and analyze the ABS & TCS wiring diagram.
You will learn how to diagnose Yaw-rate and G-Sensors.
You will learn how ABS/TCS hydraulic block works in different barking conditions.
You will learn how diagnose ABS/TCS wiring in case of common fault codes.
You will learn how to diagnose the ABS/TCS system in case on CAN-BUS faults.
You will learn how to inspect the ABS/TCS internal circuit.
You will learn how to use a scan tool to diagnose the brake system and how to perform the required calibrations.

Requirements
No requirements are needed. Anyone can learn from this course.

Description
This course explains everything about Brake Control Systems diagnostic. This course covers ABS (Anti-Lock Braking System), TCS (Traction Control System), ESP (Electronic Stability Program), HAC (Hill-Start Assist Control), DBC (Downhill Braking Control) and EBD (Electronic Brake Distribution). We talk about the system operation, components location and diagnostic, how to use the wiring diagram and scan tool to diagnose the system and much more.We have covered everything you need to test and diagnose the components on brake systems, this includes:- How ABS (Anti-Lock Braking System) works- How TCS (Traction Control System)- How ESP (Electronic Stability Program)- How HAC (Hill-Start Assist Control)- How DBC (Downhill Braking Control)-How EBD (Electronic Brake Distribution)- How Passive Speed Sensors work and how to diagnose them.- How Active Speed Sensors work and how to diagnose them.- How Yaw-Rate Sensors work and how to diagnose them.- How Lateral & Longitudinal G-Sensors works and how to diagnose them.- How test the ABS/TCS internal circuit.- How to read and analyze the ABS/TCS wiring diagrams and how to identify the wiring on each component.- How ABS and ESP systems are connected to the CAN-bus network and how to perform the network diagnostic on an actual car. - How ABS/TCS Hydraulic block works in any stage of braking including: Normal braking, Pressure Hold, Pressure Dump and Pressure Increase.- How to diagnose the brake systems with scan tools and how to use the live data, actuation test or sensor calibration options to diagnose the brake systems.

Who this course is for
Automotive Mechanics
Automotive Engineers
Automotive Diagnosticians
Electrical Technicians
Automotive Students
Automobile Technicians
DIY Automotive Repair