Mpls Fundamentals | Sample Lab Study

In this training, you can learn the basics of MPLS in practice through the sample topology.

What you'll learn

MPLS Fundamentals

MPLS Layer 3 VPNs

VRF - Virtual Router Forwarding

BGP- Border Gateway Protocol

Requirements

You Must Have Cisco CCNA Training.

It is recommended that you have received Cisco CCNP Enterprise ENCOR and ENARSI Training.

Description

!!! YOU CAN GET DISCOUNT CODES FOR ALL MY TRAININGS FROM MY WEBSITE !!!To participate in the training, you must have received the Cisco CCNA, Cisco CCNP Enterprise Core 350-401 ENCOR and Cisco CCNP Enterprise Advanced Routing and Services 300-410 ENARSI training.If you haven't taken these tutorials, you should be familiar with Rip, OSPF, EIGRP, IS-IS and BGP Routing, because we will be using all of these routing protocols in the MPLS configuration.We will activate the MPLS application step by step in the training, first we will configure the IP address of the devices in our sample topology, in the 2nd step we will configure the routing in the MPLS Domain (Provider Network), in the 3rd step we will enable MPLS on the routers in the MPLS Domain, 4 In step . we will configure MP-BGP between PE Routers, in step 5 we will create VRFs for Customer-A and B on the PE Router, in step 6 we will configure routing between CE Routers and VRFs, in step 7 and last In this step, we will perform our tests and finalize our configuration by performing redistribution operations on the PE Router.We will do the laboratory applications in education with the Eve-NG Network simulation program. I will explain in detail how to download the program and how to use it.I tried to convey this training to you in the best way with my 23 years of experience in the sector. I had a lot of fun while preparing the training, I have no doubt that you will enjoy watching it too.In order to offer you the best sound quality, I used a quality microphone while shooting.If you watch videos in Auto mode, you can watch them in 1080P if your screen resolution and internet speed are sufficient.We will do the laboratory applications in education with the Eve-NG Network simulation program. I will explain in detail how to download the program and how to use it.

Overview

Section 1: Introduction

Lecture 1 Course Content

Lecture 2 Eve-NG Installation

Lecture 3 Adding Eve-NG Cisco vIOS Image

Lecture 4 Use of Eve-NG

Section 2: VRF (Virtual Routing Forwarding)

Lecture 5 VRF-Lite Introduction

Lecture 6 VRF-Lite Configuration Lab

Section 3: MPLS Fundamentals

Lecture 7 MPLS'e Introduction

Lecture 8 MPLS Layer 3 VPNs Introduction

Lecture 9 MPLS Layer 3 VPNv4 Address

Section 4: MPLS Sample Topology Lab Study

Lecture 10 MPLS Example Lab Topology

Lecture 11 Configuring IP Addresses

Lecture 12 MPLS Domain IS-IS Routing Configuration

Lecture 13 MPLS Enable

Lecture 14 PE to PE MP-BGP Configuration

Lecture 15 PE | VRF Configuration

Lecture 16 CE to PE-VRF IP Routing Configuration

Lecture 17 Redistribution

Network Specialist,Network Engineers,IT Managers,Information Technology Consultants