Basic Taig Micro Lathe Operations with Jose Rodriguez
Basic Taig Micro Lathe Operations with Jose Rodriguez
DVDRip | English | AVI/XviD 29.970 fps 1200 Kbps | 640x480 | MP3 128 Kbps 44.1 khz | 3h 59mn + 2h 2mn | 3.4 GB
Genre: Video Training, Metalworking
DVDRip | English | AVI/XviD 29.970 fps 1200 Kbps | 640x480 | MP3 128 Kbps 44.1 khz | 3h 59mn + 2h 2mn | 3.4 GB
Genre: Video Training, Metalworking
Would you like to be able to see for yourself what can be done on a Taig micro-lathe, with just minimal tooling and expense? Are you somewhat undecided about acquiring one of these small but very capable tools and somehow wished you could just see one being put through its paces before opening your wallet? Well, wait no more! Finally there is a video that will answer most of your basic questions about this lathe. Initial setup hints will be discussed, during a thorough tour of the lathe and its basic components. This will be followed with a complete hands-on demonstration of all the basic machining operations possible on this tool. These will include:
* Facing
* Turning
* Grooving
* cut off / parting cuts
* chamfering
* center drilling
* drilling
* reaming
* tapping
* thread cutting with a die
* boring cuts
* milling
* much more!
General
Complete name : Basic Taig Micro-Lathe Techniques with Jose Rodriguez.avi
Format : AVI
Format/Info : Audio Video Interleave
File size : 1.15 GiB
Duration : 2h 2mn
Overall bit rate : 1 341 Kbps
Video
ID : 0
Format : MPEG-4 Visual
Format profile : Simple@L3
Format settings, BVOP : No
Format settings, QPel : No
Format settings, GMC : No warppoints
Format settings, Matrix : Default (H.263)
Codec ID : XVID
Codec ID/Hint : XviD
Duration : 2h 2mn
Bit rate : 1 200 Kbps
Width : 640 pixels
Height : 480 pixels
Display aspect ratio : 4:3
Frame rate : 29.970 fps
Color space : YUV
Chroma subsampling : 4:2:0
Bit depth : 8 bits
Scan type : Progressive
Compression mode : Lossy
Bits/(Pixel*Frame) : 0.130
Stream size : 1.03 GiB (89%)
Writing library : Magic0432
Audio
ID : 1
Format : MPEG Audio
Format version : Version 1
Format profile : Layer 3
Mode : Joint stereo
Mode extension : MS Stereo
Codec ID : 55
Codec ID/Hint : MP3
Duration : 2h 2mn
Bit rate mode : Constant
Bit rate : 128 Kbps
Channel(s) : 2 channels
Sampling rate : 44.1 KHz
Compression mode : Lossy
Stream size : 112 MiB (10%)
Alignment : Aligned on interleaves
Interleave, duration : 26 ms (0.78 video frame)
Complete name : Basic Taig Micro-Lathe Techniques with Jose Rodriguez.avi
Format : AVI
Format/Info : Audio Video Interleave
File size : 1.15 GiB
Duration : 2h 2mn
Overall bit rate : 1 341 Kbps
Video
ID : 0
Format : MPEG-4 Visual
Format profile : Simple@L3
Format settings, BVOP : No
Format settings, QPel : No
Format settings, GMC : No warppoints
Format settings, Matrix : Default (H.263)
Codec ID : XVID
Codec ID/Hint : XviD
Duration : 2h 2mn
Bit rate : 1 200 Kbps
Width : 640 pixels
Height : 480 pixels
Display aspect ratio : 4:3
Frame rate : 29.970 fps
Color space : YUV
Chroma subsampling : 4:2:0
Bit depth : 8 bits
Scan type : Progressive
Compression mode : Lossy
Bits/(Pixel*Frame) : 0.130
Stream size : 1.03 GiB (89%)
Writing library : Magic0432
Audio
ID : 1
Format : MPEG Audio
Format version : Version 1
Format profile : Layer 3
Mode : Joint stereo
Mode extension : MS Stereo
Codec ID : 55
Codec ID/Hint : MP3
Duration : 2h 2mn
Bit rate mode : Constant
Bit rate : 128 Kbps
Channel(s) : 2 channels
Sampling rate : 44.1 KHz
Compression mode : Lossy
Stream size : 112 MiB (10%)
Alignment : Aligned on interleaves
Interleave, duration : 26 ms (0.78 video frame)
Screenshots
Basic Taig Micro Lathe Operations with Jose Rodriguez
Basic Taig Micro Lathe Operations with Jose Rodriguez
Basic Taig Micro Lathe Operations with Jose Rodriguez
Basic Taig Micro Lathe Operations with Jose Rodriguez
