![The Pop Group - Y In Dub (Vinyl) (2021/2022) [24bit/96kHz]](https://pixhost.icu/avaxhome/76/04/009f0476_medium.jpg)
The Pop Group - Y In Dub (Vinyl) (2021/2022) [24bit/96kHz]
![The Pop Group - Y In Dub (Vinyl) (2021/2022) [24bit/96kHz]](https://pixhost.icu/avaxhome/76/04/009f0476.jpg)
The Pop Group - Y In Dub (Vinyl) (2021/2022)
Vinyl Rip | FLAC (tracks) 24-bit/96 kHz | Artwork | Time - 51:25 minutes | 1 GB
Avant-Rock, Experimental, Post-Punk | Label: Mute Records
Vinyl Rip | FLAC (tracks) 24-bit/96 kHz | Artwork | Time - 51:25 minutes | 1 GB
Avant-Rock, Experimental, Post-Punk | Label: Mute Records
The Pop Group’s seminal 1979 album Y has been given a new dub mix by British reggae legend Dennis “Blackbeard” Bovell, who has produced for a wide variety of artists including Fela Kuti, Bananarama and Linton Kwesi Johnson. This new version of the album features reimagined arrangements of the original album’s tracks with mind-bending space echoes and a plethora of other studio effects. Y is ranked by The Wire as one of the 100 Most Important Records Ever Made and by Pitchfork as one of the Best Albums of the ‘70s.
Tracklist:
1. Thief Of Fire (04:40)
2. Snowgirl (03:25)
3. Blood Money (03:02)
4. Savage Sea (03:12)
5. We Are Time (06:27)
6. Words Disobey Me (03:27)
7. Don't Call Me Pain (05:40)
8. Boys From Brazil (04:17)
9. Don't Sell Your Dreams (06:06)
10. She Is Beyond Good And Evil (06:14)
11. 3:38 (04:43)
foobar2000 1.6.7 / Dynamic Range Meter 1.1.1
log date: 2022-03-30 15:52:54
––––––––––––––––––––––––––––––––––––––––
Analyzed: The Pop Group / Y In Dub
––––––––––––––––––––––––––––––––––––––––
DR Peak RMS Duration Track
––––––––––––––––––––––––––––––––––––––––
DR13 -2.26 dB -18.28 dB 4:40 01-Theif Of Fire
DR12 -0.37 dB -15.78 dB 3:25 02-Snowgirl
DR13 -2.67 dB -19.22 dB 3:02 03-Blood Money
DR13 -3.18 dB -21.42 dB 3:11 04-Savage Sea
DR11 -2.26 dB -16.69 dB 6:28 05-We Are Time
DR13 -0.53 dB -16.57 dB 3:29 06-Words Disobey Me
DR13 -4.83 dB -22.24 dB 5:39 07-Don't Call Me Pain
DR13 -1.63 dB -17.77 dB 4:16 08-Boys From Brazil
DR16 -4.06 dB -24.97 dB 6:10 09-Don't Sell Your Dreams
DR9 -0.53 dB -13.43 dB 6:19 10-She Is Beyond Good And Evil
DR11 -0.53 dB -14.63 dB 4:46 11-3:38
––––––––––––––––––––––––––––––––––––––––
Number of tracks: 11
Official DR value: DR13
Samplerate: 192000 Hz
Channels: 2
Bits per sample: 24
Bitrate: 9216 kbps
Codec: PCM
================================================================================
log date: 2022-03-30 15:52:54
––––––––––––––––––––––––––––––––––––––––
Analyzed: The Pop Group / Y In Dub
––––––––––––––––––––––––––––––––––––––––
DR Peak RMS Duration Track
––––––––––––––––––––––––––––––––––––––––
DR13 -2.26 dB -18.28 dB 4:40 01-Theif Of Fire
DR12 -0.37 dB -15.78 dB 3:25 02-Snowgirl
DR13 -2.67 dB -19.22 dB 3:02 03-Blood Money
DR13 -3.18 dB -21.42 dB 3:11 04-Savage Sea
DR11 -2.26 dB -16.69 dB 6:28 05-We Are Time
DR13 -0.53 dB -16.57 dB 3:29 06-Words Disobey Me
DR13 -4.83 dB -22.24 dB 5:39 07-Don't Call Me Pain
DR13 -1.63 dB -17.77 dB 4:16 08-Boys From Brazil
DR16 -4.06 dB -24.97 dB 6:10 09-Don't Sell Your Dreams
DR9 -0.53 dB -13.43 dB 6:19 10-She Is Beyond Good And Evil
DR11 -0.53 dB -14.63 dB 4:46 11-3:38
––––––––––––––––––––––––––––––––––––––––
Number of tracks: 11
Official DR value: DR13
Samplerate: 192000 Hz
Channels: 2
Bits per sample: 24
Bitrate: 9216 kbps
Codec: PCM
================================================================================
o Hardware:
ï TT:†Clearaudio ìCustomî
ï Motor controller:†Pro-Ject Speed Box SE II
ï Cartridge:†Clearaudio SYMPHONY V2 MC
ï Interconnects:†Clearaudio (Original)
ï Phonopreamplifier:†Pro-Ject Phono Box RS
o Cleaning process:
ï Wood glue:†no
ï Nessie Vinylcleaner Record Cleaning Maschine:†yes
o Recording:
ï Recording:
Pro-Ject Phono Box RS –> connected with a Steinberg UR22 –> connected via USB to a WIN10 Personal Computer (Intel(R) Core(TM) i7-4790 CPU @ 3.60GHz) –> Recording Software: iZotope RX3
ï Microphone cable: XLR (female) - 6.3 mono jack
ï Monitor/Headphone: SONY WH-1000XM3 - OVER EAR
o Software / Treatment /Tagging
This is what I do in general. Not every step is done for all my rips ñ sometimes an anomaly is undetectable, or all my attempts fail … then it is not processed - otherwise as mentioned below:
o Clickrepair
ï Light de-Clicking, significant clicks/anomalies manually removing
ï De-Noising: no
ï @ Level: 30 (YES!) I decide if it will be repaired or not! 100% handmade! Nothing is processed automatically;
ï heavy clicks / anomalies, mark the region, copy in a new (iZotope RX Advanced) temp-file.
Open in Clickrepair (every option off) and let it run until the click/part and repair/removing manually
(Clickrepair is able to calculate the possible groove running, try out how it most fits Ö)
o iZotope RX Advanced
ï manual click/anomalies removal ñ very carefully (if necessary) / various settings (mine)
Clicks - Algorithm: Single-band, Click type: Click, Sensitivity: 1.2, Click widening [ms]: 0.0
Decrackle (only gap, Lead-in, Lead-out)* - ï Quality: High, Amplitude skew: 9.0
Clicks (only gap, Lead-in, Lead-out)* - ï Algorithm: Single-band, Click type:
Click, Sensitivity: 9, Click widening [ms]: 0.0
Clicks/pops - ï Algorithm: M-Band (random clicks), Click type:
Discontinuity, Sensitivity: 5, Click widening [ms]: 4.0
ï Algorithm: M-Band (random clicks), Click type:
Custom, Sensitivity: 5, Click widening [ms]: 2.0
Thumps - ï Algorithm: M-Band (random clicks), Click type:
Thump, Sensitivity: 4, Frequency skew: -5.0, Click widening [ms]: 0.0
Denoise - (only gap, Lead-in, Lead-out)* ï "Reduce only tonal noise or hum" with my own settings:
Threshold: 0,0 - Reduction: (Noisy: 0,0 - Tonal 12,0)
Quality: D (Best) - Artifact control: 7,0
Select the area with the "Time-frequency selection tool [R]) and set the frequency range from 0 - 250 Hz (Start: 0 End: 250)
Click "Learn", ignore the message "Noise profile is not …" and click "Process"
(my personal experience (I've spent a couple of hours on it):
some pops and thumbs are eliminated and the best … it sounds a bit better, deeper, less rumble, more stable;
please note that these are my experiences, others may have different experiences.)
Hum - (only gap, Lead-in, Lead-out)* ï Base frequency 50 Hz(Germany), Filter Q: 97,7, 1 harmonics, Harmonic gains [dB]: -45.0, Filter DC-offset: yes
ï Select the area with the "Time-frequency selection tool [R]) and set the frequency range from 0 - 15 Hz (Start: 0 End: 15) and deleted
Gain (YES) - Normalize - Target peak level: -0.53 dBFS (the best solution in my opinion)
ï split into individual tracks
ï A final listening of each track is mandatory
* NO SIGNAL will be harmed!
o FLAC
ï dbPowerAmp (release 17.2 [64-bit]): Level 5
o Tagging/DR-Log
ï pre-Tagging: via FOOBAR2000 -> Discogs-link (Discogs release - if available)
ï DR-Log: via FOOBAR2000 (by using the 24-bit/96/192 khz cleaned wave files)
ï Final Tagging: via MP3tag (fine tuning, incl. some individual Tags)
o Artwork
ï Brother MFC Scanner
ï Microsoft Image Composite Editor Version 2.0.3.0 (64bit) (Freeware) ñ Image Stitcher
ï Corel PSP Pro 2019 (64-bit) ñ Preparation
24/192 -> 24/96 (XLD/SoX HQ)
ï TT:†Clearaudio ìCustomî
ï Motor controller:†Pro-Ject Speed Box SE II
ï Cartridge:†Clearaudio SYMPHONY V2 MC
ï Interconnects:†Clearaudio (Original)
ï Phonopreamplifier:†Pro-Ject Phono Box RS
o Cleaning process:
ï Wood glue:†no
ï Nessie Vinylcleaner Record Cleaning Maschine:†yes
o Recording:
ï Recording:
Pro-Ject Phono Box RS –> connected with a Steinberg UR22 –> connected via USB to a WIN10 Personal Computer (Intel(R) Core(TM) i7-4790 CPU @ 3.60GHz) –> Recording Software: iZotope RX3
ï Microphone cable: XLR (female) - 6.3 mono jack
ï Monitor/Headphone: SONY WH-1000XM3 - OVER EAR
o Software / Treatment /Tagging
This is what I do in general. Not every step is done for all my rips ñ sometimes an anomaly is undetectable, or all my attempts fail … then it is not processed - otherwise as mentioned below:
o Clickrepair
ï Light de-Clicking, significant clicks/anomalies manually removing
ï De-Noising: no
ï @ Level: 30 (YES!) I decide if it will be repaired or not! 100% handmade! Nothing is processed automatically;
ï heavy clicks / anomalies, mark the region, copy in a new (iZotope RX Advanced) temp-file.
Open in Clickrepair (every option off) and let it run until the click/part and repair/removing manually
(Clickrepair is able to calculate the possible groove running, try out how it most fits Ö)
o iZotope RX Advanced
ï manual click/anomalies removal ñ very carefully (if necessary) / various settings (mine)
Clicks - Algorithm: Single-band, Click type: Click, Sensitivity: 1.2, Click widening [ms]: 0.0
Decrackle (only gap, Lead-in, Lead-out)* - ï Quality: High, Amplitude skew: 9.0
Clicks (only gap, Lead-in, Lead-out)* - ï Algorithm: Single-band, Click type:
Click, Sensitivity: 9, Click widening [ms]: 0.0
Clicks/pops - ï Algorithm: M-Band (random clicks), Click type:
Discontinuity, Sensitivity: 5, Click widening [ms]: 4.0
ï Algorithm: M-Band (random clicks), Click type:
Custom, Sensitivity: 5, Click widening [ms]: 2.0
Thumps - ï Algorithm: M-Band (random clicks), Click type:
Thump, Sensitivity: 4, Frequency skew: -5.0, Click widening [ms]: 0.0
Denoise - (only gap, Lead-in, Lead-out)* ï "Reduce only tonal noise or hum" with my own settings:
Threshold: 0,0 - Reduction: (Noisy: 0,0 - Tonal 12,0)
Quality: D (Best) - Artifact control: 7,0
Select the area with the "Time-frequency selection tool [R]) and set the frequency range from 0 - 250 Hz (Start: 0 End: 250)
Click "Learn", ignore the message "Noise profile is not …" and click "Process"
(my personal experience (I've spent a couple of hours on it):
some pops and thumbs are eliminated and the best … it sounds a bit better, deeper, less rumble, more stable;
please note that these are my experiences, others may have different experiences.)
Hum - (only gap, Lead-in, Lead-out)* ï Base frequency 50 Hz(Germany), Filter Q: 97,7, 1 harmonics, Harmonic gains [dB]: -45.0, Filter DC-offset: yes
ï Select the area with the "Time-frequency selection tool [R]) and set the frequency range from 0 - 15 Hz (Start: 0 End: 15) and deleted
Gain (YES) - Normalize - Target peak level: -0.53 dBFS (the best solution in my opinion)
ï split into individual tracks
ï A final listening of each track is mandatory
* NO SIGNAL will be harmed!
o FLAC
ï dbPowerAmp (release 17.2 [64-bit]): Level 5
o Tagging/DR-Log
ï pre-Tagging: via FOOBAR2000 -> Discogs-link (Discogs release - if available)
ï DR-Log: via FOOBAR2000 (by using the 24-bit/96/192 khz cleaned wave files)
ï Final Tagging: via MP3tag (fine tuning, incl. some individual Tags)
o Artwork
ï Brother MFC Scanner
ï Microsoft Image Composite Editor Version 2.0.3.0 (64bit) (Freeware) ñ Image Stitcher
ï Corel PSP Pro 2019 (64-bit) ñ Preparation
24/192 -> 24/96 (XLD/SoX HQ)
Thanks to the Original customer!