Now You See Me - I maghi del crimine (2013)

[ Info sul file ]

Nome: Now.You.See.Me.I.Maghi.Del.Crimine.2013.iTALiAN.MD.TELSYNC.XviD-REV.avi
Data: Thu, 11 Jul 2013 20:41:37 +0100
Dimensione: 1,362,966,528 bytes (1299.826172 MiB)

[ Magic ]

Tipo file: RIFF (little-endian) data, AVI, 720 x 320, 24.00 fps, video: XviD, audio: MPEG-1 Layer 3 (stereo, 48000 Hz)

[ Info generiche ]

Durata: 01:44:13 (6253.375 s)
Contenitore: AVI OpenDML
L'AVI ha un indice?: Sì
Totale tracce: 2
Traccia n. 0: video
Traccia n. 1: audio
ISFT: VirtualDubMod 1.5.4.1 (build 2178/release)
Junk: VirtualDubMod build 2178/release

[ Dati rilevanti ]

Risoluzione: 720 x 320
Larghezza: multipla di 16
Altezza: multipla di 32
DRF medio: 4.04914
Deviazione standard: 2.124396
Media pesata dev std.: 1.976175

[ Traccia video ]

FourCC: xvid/XVID
Risoluzione: 720 x 320
Frame aspect ratio: 9:4 = 2.25
Pixel aspect ratio: 1:1 = 1
Display aspect ratio: 9:4 = 2.25
Framerate: 24 fps
Totale frames: 150,081
Dimensione stream: 1,255,649,163 bytes (1197.480357 MiB)
Bitrate: 1606.363492 kbps
Qf: 0.290503
Key frames: 2,744 (0; 232; 242; 542; 743; … 150003)
Null frames: 0
Min key int: 1
Max key int: 300
Avg key int: 54.694242
Ritardo: 0 ms

[ Traccia audio ]

Audio tag: 0x55 (MP3)
Canali: 2
Chunks: 150,070
Dimensione stream: 100,053,888 bytes (95.418823 MiB)
Tipo di bitstream (bs): MPEG-1 Layer III
Frames (bs): 260,557
Durata: 01:44:13 (6253.368 s)
Chunk-aligned (bs): Sì
Bitrate (bs): 128 kbps CBR
Freq. campionamento (bs): 48000 Hz
Modo (bs): joint stereo
Padding (bs): No
Emphasis (bs): none
Preload: 504 ms
Max A/V diff: 528 ms
Ritardo: 0 ms

[ Bitstream video ]

Tipo di bitstream: MPEG-4 Part 2
User data: DivX503b1393p
User data: XviD0050
Packed bitstream: Sì (*)
QPel: No
GMC: No
Interlacciamento: No
Aspect ratio: Square pixels
Quant type: H.263
Totale frames: 150,081
Drop/delay frames: 0
Frames corrotti: 0

I-VOPs: 2744 ( 1.828 %)
P-VOPs: 61458 ( 40.950 %) ########
B-VOPs: 85880 ( 57.222 %) ###########
S-VOPs: 0 ( 0.000 %)
N-VOPs: 0 ( 0.000 %)

Max B-VOPs consecutivi: 2
1 consec: 18464 ( 35.391 %) #######
2 consec: 33708 ( 64.609 %) #############

[ Analisi DRF ]

DRF nedio: 4.04914
deviazione standard: 2.124396
max DRF: 26

DRF=1: 6931 ( 4.618 %) #
DRF=2: 26101 ( 17.391 %) ###
DRF=3: 31339 ( 20.881 %) ####
DRF=4: 43630 ( 29.071 %) ######
DRF=5: 15098 ( 10.060 %) ##
DRF=6: 9054 ( 6.033 %) #
DRF=7: 9142 ( 6.091 %) #
DRF=8: 3207 ( 2.137 %)
DRF=9: 1801 ( 1.200 %)
DRF>9: 3779 ( 2.518 %) #

I-VOPs DRF medio: 3.10277
I-VOPs deviazione std.: 1.720124
I-VOPs max DRF: 17

P-VOPs DRF medio: 3.154398
P-VOPs deviazione std.: 1.89587
P-VOPs max DRF: 17

B-VOPs DRF medio: 4.719679
B-VOPs deviazione std.: 2.041824
B-VOPs max DRF: 26

[ Conformità al profilo ]

Profilo selezionato: MTK PAL 6000
Risoluzione: Ok
Framerate: 24 <> 25
Min riempimento buffer: 80%

Recovery Volumes (.rev)

Recovery volumes or .rev files are special files which can be created by WinRAR/RAR and allow you to reconstruct missing and damaged files in a volume set. They can
only be used with multi-volume archives.

This feature may be useful for backups or, for example, when you post a multivolume archive to a newsgroup and some of the subscribers did not receive some files. Reposting recovery volumes instead of usual volumes may reduce the total number of files to repost.

Each recovery volume is able to reconstruct one missing RAR volume. For example, if you have 30 volumes and 3 recovery volumes, you are able to reconstruct any 3 missing volumes. If the number of .rev files is less than a number of missing volumes, reconstructing is impossible. The total number of usual and recovery volumes must not exceed 255 and the number of recovery volumes must be less than the number of RAR volumes.

WinRAR reconstructs missing and damaged volumes either when clicking on .rev file, or when using rc command or automatically, if it cannot locate the next volume and finds the required number of .rev files when unpacking.

You may use the "Recovery volumes" option in the Archive name and parameters dialog or a similar option also appears in the Protect archive command to create recovery volumes. In the command line mode you may do it with -rv switch or rv command.

Original copies of damaged volumes are renamed to *.bad before reconstruction. For example, volname.part03.rar will be renamed to volname.part03.rar.bad.

From Win-rar.com