nTopology 5.20.2
nTopology 5.20.2 | 1.3 Gb
nTopology is pleased to announce the availability of nTopology 5.20.2. This release features our new curve and profile modeling blocks, allowing more nTop modeling and enabling iteration of an entire design space.
Arc by Tangent
- The Arc by Tangent block creates an arc from a start point, tangent vector, and end point input.
- Location: Create > Curves
. Start Point: Start point of the arc.
. Start Tangent: Vector representing the tangent direction of the arc at the start point.
. End Point: End point of the arc.
. Output: Arc
![nTopology 5.20.2]()
Extruded Cut
- The Extruded Cut block extrudes, and boolean subtracts a profile from a solid. The Profile will be cut through the entire Target Body input.
- Location: Modeling > Operations
. Profile: The profile to extrude and cut into the Target Body.
. Target: The Implicit Body to cut
. Blend Type: The Blend Type where the Profiles are cut from the Target Body.
. Blend Radius: Radius of the blend.
. Draft Angle: Draft angle applied to the extrusion.
. Direction: Direction of extrusion. Uses the normals of the Profiles' plane by default.
. Output: Implicit Body
![nTopology 5.20.2]()
Polycurve from Curves
- The Polycurve from Curves block combines a list of curves (connected set of arcs, lines, and splines) and creates a Polycurve. The input curve list should have shared endpoints. The input curves can be open or closed, planar or non-planar, but not disconnected or branching.
- Location: Create > Curves
. Curves: List of curves to join into a single polycurve
. Output: Polycurve
![nTopology 5.20.2]()
Polyline
- The Polyline block creates a polyline from an input list of points.
- Location: Create > Curves
. Points: List of points to connect with line segments
. Output: Polycurve
![nTopology 5.20.2]()
Profile from Curves
- The Profile from Curves block creates a single profile from an input list of curves.
- Location: Create > Curves
. Curves: List of Planar curves.
. Normal: Direction to view the curve plane and orient open curves with respect to.
. Output: Profile
![nTopology 5.20.2]()
Get CAD Faces by Name
- The Get CAD Faces by Name block extracts the CAD Faces from the CAD Body, Component, or Part based on the Face Name.
- Location: Modeling > Utilities
. Part: Part from which to get Faces.
. Face Name: Name of faces to get.
. Output: CAD Face List
![nTopology 5.20.2]()
Usage Improvements
- We’ve implemented lazy loading for Toolkit blocks, resulting in faster initial load times. The Toolkit blocks will now load only when added to your nTop notebook. As a result, you may not see the start-up loader with a progress bar when you launch nTop.
Block Updates
- We have updated our curve and profile modeling blocks to allow more modeling in nTop. Many blocks have also been updated with name changes, input/output type changes, or both, but their behavior has not changed. This support article has all the information regarding this update.
![nTopology 5.20.2]()
- We have added the Name property to the CAD Face type to allow users to extract CAD Faces based on the Name.
Bug Fix
- We fixed an issue with the Topology Optimization block that errored out when multiple Flexible connectors shared nodes on an FE Boundary.
- The Arc by Tangent block creates an arc from a start point, tangent vector, and end point input.
- Location: Create > Curves
. Start Point: Start point of the arc.
. Start Tangent: Vector representing the tangent direction of the arc at the start point.
. End Point: End point of the arc.
. Output: Arc
nTopology 5.20.2
Extruded Cut
- The Extruded Cut block extrudes, and boolean subtracts a profile from a solid. The Profile will be cut through the entire Target Body input.
- Location: Modeling > Operations
. Profile: The profile to extrude and cut into the Target Body.
. Target: The Implicit Body to cut
. Blend Type: The Blend Type where the Profiles are cut from the Target Body.
. Blend Radius: Radius of the blend.
. Draft Angle: Draft angle applied to the extrusion.
. Direction: Direction of extrusion. Uses the normals of the Profiles' plane by default.
. Output: Implicit Body
nTopology 5.20.2
Polycurve from Curves
- The Polycurve from Curves block combines a list of curves (connected set of arcs, lines, and splines) and creates a Polycurve. The input curve list should have shared endpoints. The input curves can be open or closed, planar or non-planar, but not disconnected or branching.
- Location: Create > Curves
. Curves: List of curves to join into a single polycurve
. Output: Polycurve
nTopology 5.20.2
Polyline
- The Polyline block creates a polyline from an input list of points.
- Location: Create > Curves
. Points: List of points to connect with line segments
. Output: Polycurve
nTopology 5.20.2
Profile from Curves
- The Profile from Curves block creates a single profile from an input list of curves.
- Location: Create > Curves
. Curves: List of Planar curves.
. Normal: Direction to view the curve plane and orient open curves with respect to.
. Output: Profile
nTopology 5.20.2
Get CAD Faces by Name
- The Get CAD Faces by Name block extracts the CAD Faces from the CAD Body, Component, or Part based on the Face Name.
- Location: Modeling > Utilities
. Part: Part from which to get Faces.
. Face Name: Name of faces to get.
. Output: CAD Face List
nTopology 5.20.2
Usage Improvements
- We’ve implemented lazy loading for Toolkit blocks, resulting in faster initial load times. The Toolkit blocks will now load only when added to your nTop notebook. As a result, you may not see the start-up loader with a progress bar when you launch nTop.
Block Updates
- We have updated our curve and profile modeling blocks to allow more modeling in nTop. Many blocks have also been updated with name changes, input/output type changes, or both, but their behavior has not changed. This support article has all the information regarding this update.
nTopology 5.20.2
- We have added the Name property to the CAD Face type to allow users to extract CAD Faces based on the Name.
Bug Fix
- We fixed an issue with the Topology Optimization block that errored out when multiple Flexible connectors shared nodes on an FE Boundary.
nTopology 5.20.2
nTopology introduced the concept of implicit modeling for mechanical design, which is an innovative, modern, and scalable way define parts and products. It has many benefits to end-users and companies, such as the elimination of model failures, speed of changes or iterations, and scalability to name a few. But implicit modeling enables so much more. In this informational session, we'll explore a topic that is redefining product development – field-driven design. In short, field-driven design is a way for design, analysis, and manufacturing teams to overlay information into one engineering model. This approach enables orders of magnitude increase in design iteration speed and greatly improves collaboration between teams.
How Field-Driven Design Allows Engineers to Design for Additive Manufacturing
Watch this information session where we'll define field-driven design, show examples of how it enables better knowledge sharing, and show how it promotes the development of more sophisticated, highly engineered products. You'll also better understand how nTopology is addressing today's engineering problems through its nTop Platform product.
nTopology was founded in 2015 to enable engineers and designers to create any geometry — no matter how complex — and meet the requirements of high-performance products.
Owner: nTopology
Product Name: nTopology
Version: 5.20.2
Supported Architectures: x64
Website Home Page : www.ntop.com
Languages Supported: english
System Requirements: Windows *
Size: 1.3 Gb
nTopology 5.20.2
Please visit my blog
Added by 3% of the overall size of the archive of information for the restoration
No mirrors please
![nTopology 5.20.2]()
Added by 3% of the overall size of the archive of information for the restoration
No mirrors please
nTopology 5.20.2
