Zuken E³.series 2018 version 19.01 Update

Designer-11031 Possible to place a dynamic symbol within a block
Designer-30949 Connector pin terminal symbol is not displayed when placing a new device view with the setting ''Use active connector pin terminal''
Designer-31053 Incorrect display of drill hole in cutout
Designer-31054 A 'Graphic' is, wrongly, displayed in a drill hole
Designer-31056 Cutouts in 3D representation of E3.panel might be displayed beyond the original model
Designer-31061 ¶ (Pilcrow) in output window with Russian operating system
Designer-31215 Chinese characters with specific fonts are not displayed at PDF Export
Designer-31269 Impossible to directly connect a feed-through connector with single pin display from within the Database window - 'Invalid position - Cannot place ALL the symbols; command aborted.'
Designer-31431 The COM method "sym.PLacePins" doesn´t work when an assembly is defined as connector pin terminal
Designer-31533 Symbol graphic is changed after connecting MIL connectors by using variants
Designer-31591 Using Multiple Selection of graphic elements enables display of arrowheads on full circles
Designer-31641 Regarding the space requirement, model views are not considered correctly when editing the model in Database Editor
Designer-31682 Sheet access permission (for Delete Sheet) only works when the sheet has been opened before
Designer-31696 Wrong display of terminal jumpers in Panel in 2D
Designer-31732 When resetting the Database tree, folders and contents remain expanded
Designer-31775 Wire jumper is not displayed in panel
Designer-31807 No display of signal logic lines between connector views of block connectors (hierarchical connectors also) when an additional mating connector is connected to the block connector
Designer-31845 The following warning appears at update of an attribute text template symbol which is located on a connection line passing a block 'W - Symbol type for following symbols not changed… …Symbol {2} (symbol was previously not assigned to a block, now it would be assigned (because of space requirement rectangle)) W - Not all changes of symbol type were completed successfully!!'
Designer-31895 Double display of graphics by COM script exporting PDF from Formboard sheet
Designer-31898 Device table shows attributes of the component, when 'Device' and 'Component' are defined as owners for the attribute
Designer-31902 Write protection via read-only level does not work for graphic groups
Designer-32041 When a numeric prefix and postfix (suffix) is used for wire numbering, the placeholder <nnn> for the number of digits is incorrectly incremented
Designer-32043 When starting the DBE from E3.series, the maximum permitted sheet number affects the number of opened objects and leads to following message at graphic copy "Maximum of x sheets exceeded!"
Designer-32046 Error 'E - Error in function hncpst\get_valid_composites(), ret = 1' when copying a block symbol whereas the block owns a 'component without structure' without taking the structure and the block connectors don't have a component description assigned
Designer-32048 DBE: Component table - line may be locked after copying and pasting
Designer-32064 In specific circumstances, it might happen that the variant type cannot be changed
Designer-32071 Nodes can't be deleted in Formboard
Designer-32076 E3.panel - certain circumstances may cause incorrect wire lenghts and cable ducts are not recognized
Designer-32086 Selected connect lines on panel sheet are displayed differently
Designer-32100 PDF export might interrupt with error ''E - Following error has occurred while exporting to PDF: A link annotation refers to nonexisting page '4''
Designer-32102 The E3.viewer converts Multiuser-projects => Project can't be opened with Viewer if it has to be converted
Designer-32122 The COM method "Job.HighlightAttribute" doesn't work with internal attribute name
Designer-32125 Not all model instances are updated in project
Designer-32138 E3 may crash under certain circumstances, when the COM method "sht.ImportDXF" is called with empty file name
Designer-32150 The COM call "Job.JumpToId" resets all previously set highlights at item ID of ItemType 110 (group) although the setting "Keep existing highlights when jumping" is active
Designer-32155 Incorrect docking of cable duct in E3.panel after modification
Designer-32158 The option "Copy from selected sheet" does not work for text types "Name 1" (#40) and "Name 2" (#48)
Designer-32175 The COM function 'Sht.GetSymbolIds' returns inactive symbols although the corresponding option is not active
Designer-32204 Wrong representation with PDF export (and all other exports) at ballooning
Designer-32209 PDF/A Export not possible "Following error occurred during the PDF export: Handle parameter or option of type 'font' has bad value -1"
Designer-32210 SVG file in combination with HCV export of E3.3DRoutingBridge is incomplete
Designer-32236 Change on pin attribute interrupts with following message "Locked device(s) xxxxxx has been changed. Your changes will be reverted."
Designer-32241 Opening / editing a component in Database Editor may cause an infinite loop under certain circumstances
Designer-32244 E3.ReportScripts: Add-ons - E3.series documents - Create BOM: Price is not listed, when article number of component differs from the component name
Designer-32246 No ability to insert negative Z-coordinates in DBE in the node coordinates from a model pin - message - 'I - The value must be between 0.00 and 1000000000000.00'
Designer-32256 E3 wrongly jumps to Pin Table when the pin is displayed in the column "Connection Target"
Designer-32258 Cable duct inlet/outlet in assembly can't be deleted or moved anymore
Designer-32269 The attribute '.Wiretype_Default' is not evaluated at signals of a signal class
Designer-32286 When a connector doesn't have a general connector symbol, it cannot be assigned to a block in DBE
Designer-32287 COM: The COM method "Pin.GetCableDuctIds" returns cable ducts twice
Designer-32300 Pin attributes in a formboard table subrow are not displayed
Designer-32317 Error message "Error in function int CheckConnectionLimit::exchange_cavity_parts_for_pins(), ret = 1" after creation, closing and reopening a multi-user project - with multiple wire crimps
Designer-32319 Incorrect sorting of selection list for 'Connection type'
Designer-32328 Entries in the device table are missing from version 18.33 on
Designer-32337 GraphInterface::SetImageInfo can't embed TIF images
Designer-32340 COM: The COM method "GetBomPartList" returns incorrect amounts for additional parts
Designer-32345 Multi-user project cannot be opened due to text conflict after this text has been deleted in another Client (e.g. Update in Project, Change Component, Change Symbol)
Designer-32351 Incorrect length calculation for conductors/wires in cable duct references due to double elements having variants assigned
Designer-32383 When inserting multiple wire names and defining angle brackets (<n>) as format string, the wire names are no longer incremented