Waterloo Hydrogeologic Visual MODFLOW Flex 11.0
Waterloo Hydrogeologic Visual MODFLOW Flex 11.0 | 2.1 Gb
Waterloo Hydrogeologic, a division of Nova Metrix LLC, has released Visual MODFLOW Flex 11.0, the latest version of the popular graphical user interface that brings together industry-standard codes for groundwater flow and contaminant transport, essential analysis and calibration tools, and stunning 3D visualization capabilities in a single environment.
Version 11.0 | Build 11.0.2.52854 (June 2025)
Model and grid import
Importing models has been massively overhauled in Visual MODFLOW Flex 11.0. Model import now uses a new, proprietary Python library based on FloPy, significantly improving flexibility and stability when importing external models.
- During installation, Visual MODFLOW Flex now creates a dedicated Conda environment running Python 3.12 and installs the FlexPy and FloPy libraries
- MODFLOW-6 models can now be imported
- SEAWAT models may now be imported
- Model grids in the DIS and DISV format can now be imported without importing other model elements
- Flow properties (such as hydraulic conductivity and storage) in LPF, NPF, and UPW formats can now be imported independent of the model import step
- Flow property package settings can be brought in during import
- Most common boundary conditions (CHD, RIV, GHB, DRN, RCH, and EVT) can now be imported independently
- Solver settings (IMS, PCG, GMG, SIP, WHS, SAMG) may now be imported
- Output control settings may now be imported
Working with unstructured grids
Unstructured grids can now be imported into Visual MODFLOW Flex and unstructured grids can now be created outside of the conceptual modeling workflow.
- Unstructured MODFLOW-6 models using DISV grids may now be imported
- DISV unstructured grids may now be imported independently
- Unstructured grids (Voronoi, quadtree) may now be created directly in the numerical modeling workflow
- 3D unstructured gridded data (such as heads or concentration results) may now be imported
- 3D unstructured gridded data can be used to set model properties such as initial heads and initial concentrations
TIN surfaces
Triangular irregular network (TIN) surfaces can now be used with your Visual MODFLOW Flex projects. The following functionalities are now supported:
- Import TINs from point shapefiles (.shp) and from Triangle .node or .ele files
- Generate TINs from existing point data objects, using linear or kriging interpolation schemes
- Generate TINs from model layers
- Use TINs to define model horizons
- Use TINs in the expression builder of other data objects
- Use TINs to define boundary condition parameters and model properties in the numerical modeling workflow
Visual MODFLOW Flex includes the following improvements for working with your models:
Usability:
- Objects in the data tree can now be reordered by dragging-and-dropping
- Runs can be given an alias, renaming them in the interface
- The coordinate reference system (CRS) selector is now searchable
Data operations:
- Attribute data from points and polygons may now be referenced in the expression builder
- Elevation data from points may now be referenced in the expression builder
- Export
. Recharge and Evapotranspiration boundary conditions as shapefiles
. Surfaces and TINs as point shapefiles
. TINs as polygons
. Water table outputs as shapefile contours or surface
Boundary conditions:
- Inactive transport areas: transport models can include explicit zones for active transport and inactive transport (ICBUND for MT3D-MS, RT3D, and SEAWAT)
- Transient boundary condition data may now be defined or edited in numerical workflows using the new Schedule Editor
- Recharge and EVT can now be assigned to specified layers:
. Edit/assign layer in recharge/EVT boundary conditions
. Support for RCHOP = 2, NEVTOP = 2 options at the translation step for applicable flow engines
. The expression builder supports the layer() function which takes an elevation (from a surface or a constant values) and outputs the associated layer number (useful for e.g., assigning recharge to outcropping layers in unstructured grids)
- Specified Flux BCs can now be translated to the mathematically-equivalent WEL package file when using MODFLOW-6 (which does not include/support the specified flux BC)
Other enhancements
- Upper and lower cutoffs can now be applied when visualizing surface and TIN data objects
- When defining model horizons, surfaces that do not cover the entire model area can now be extrapolated to the model boundary
- In the PEST workflow, flux observations are now available for the MODFLOW-USG engine (consistent with other engines)
- In the conceptual modeling workflow, horizons can now be defined using a constant value, instead of always requiring a surface or TIN
- US regional settings for number and date formats are no longer required to run Visual MODFLOW Flex (however, these settings are still recommended)
- The CRS library has been expanded
Defects addressed
- Fixed import failure when importing Visual MODFLOW Classic projects using constant head boundary conditions with the SEAWAT engine
- Fixed translation issue when defining unstructured grid property zones using polygons with holes
- Fixed issue where external boundary condition files could be selected as an option with MODFLOW-SURFACT, causing run failure
- Fixed issue where well import could fail due to small numerical rounding errors
- Fixed rendering issue where water table would not be drawn in 2D viewers if all the elevation values were negative
- Fixed issue where MODFLOW-6 constant head boundary conditions would not translate if the ending head elevation was zero or negative.
- Fixed issue where WEL boundary conditions were sometimes assigned to the wrong grid in MODFLOW-LGR models
- Fixed rendering issue where isosurface coloring was sometimes inconsistent with the selected gradient
- Fixed rendering issue where isosurfaces would sometimes not be correctly clipped by the water table
- Fixed performance issue where manually digitizing model elements using polylines on unstructured grids could be very slow
- Fixed data issue where well pumping schedules in dd/mm/yyyy format could sometimes be interpreted by the well editor as mm/dd/yyyy format
- Fixed issue where importing recharge boundary conditions in the IJK format could sometimes fail
- Fixed interface issue where the “Well Heads” and “Well Path” button were missing when editing non-vertical wells
- Fixed issue where attempting to use LAK/UZF packages with MT3DMS could cause run failure
- Fixed issue where calibration dashboard results could sometimes be inconsistent with model results in unstructured grids
- Fixed issue where observation well data could not be exported
- Fixed rare issue where conductivity values were sometimes not updated by PEST, causing PEST run failure
Usability:
- Objects in the data tree can now be reordered by dragging-and-dropping
- Runs can be given an alias, renaming them in the interface
- The coordinate reference system (CRS) selector is now searchable
Data operations:
- Attribute data from points and polygons may now be referenced in the expression builder
- Elevation data from points may now be referenced in the expression builder
- Export
. Recharge and Evapotranspiration boundary conditions as shapefiles
. Surfaces and TINs as point shapefiles
. TINs as polygons
. Water table outputs as shapefile contours or surface
Boundary conditions:
- Inactive transport areas: transport models can include explicit zones for active transport and inactive transport (ICBUND for MT3D-MS, RT3D, and SEAWAT)
- Transient boundary condition data may now be defined or edited in numerical workflows using the new Schedule Editor
- Recharge and EVT can now be assigned to specified layers:
. Edit/assign layer in recharge/EVT boundary conditions
. Support for RCHOP = 2, NEVTOP = 2 options at the translation step for applicable flow engines
. The expression builder supports the layer() function which takes an elevation (from a surface or a constant values) and outputs the associated layer number (useful for e.g., assigning recharge to outcropping layers in unstructured grids)
- Specified Flux BCs can now be translated to the mathematically-equivalent WEL package file when using MODFLOW-6 (which does not include/support the specified flux BC)
Other enhancements
- Upper and lower cutoffs can now be applied when visualizing surface and TIN data objects
- When defining model horizons, surfaces that do not cover the entire model area can now be extrapolated to the model boundary
- In the PEST workflow, flux observations are now available for the MODFLOW-USG engine (consistent with other engines)
- In the conceptual modeling workflow, horizons can now be defined using a constant value, instead of always requiring a surface or TIN
- US regional settings for number and date formats are no longer required to run Visual MODFLOW Flex (however, these settings are still recommended)
- The CRS library has been expanded
Defects addressed
- Fixed import failure when importing Visual MODFLOW Classic projects using constant head boundary conditions with the SEAWAT engine
- Fixed translation issue when defining unstructured grid property zones using polygons with holes
- Fixed issue where external boundary condition files could be selected as an option with MODFLOW-SURFACT, causing run failure
- Fixed issue where well import could fail due to small numerical rounding errors
- Fixed rendering issue where water table would not be drawn in 2D viewers if all the elevation values were negative
- Fixed issue where MODFLOW-6 constant head boundary conditions would not translate if the ending head elevation was zero or negative.
- Fixed issue where WEL boundary conditions were sometimes assigned to the wrong grid in MODFLOW-LGR models
- Fixed rendering issue where isosurface coloring was sometimes inconsistent with the selected gradient
- Fixed rendering issue where isosurfaces would sometimes not be correctly clipped by the water table
- Fixed performance issue where manually digitizing model elements using polylines on unstructured grids could be very slow
- Fixed data issue where well pumping schedules in dd/mm/yyyy format could sometimes be interpreted by the well editor as mm/dd/yyyy format
- Fixed issue where importing recharge boundary conditions in the IJK format could sometimes fail
- Fixed interface issue where the “Well Heads” and “Well Path” button were missing when editing non-vertical wells
- Fixed issue where attempting to use LAK/UZF packages with MT3DMS could cause run failure
- Fixed issue where calibration dashboard results could sometimes be inconsistent with model results in unstructured grids
- Fixed issue where observation well data could not be exported
- Fixed rare issue where conductivity values were sometimes not updated by PEST, causing PEST run failure
Waterloo Hydrogeologic Visual MODFLOW Flex 11.0
Visual MODFLOW Flex is more than just a graphical user interface for MODFLOW groundwater simulations. Visual MODFLOW Flex brings together industry-standard codes for groundwater flow and contaminant transport, essential analysis and calibration tools, and stunning 3D visualization capabilities in a single, easy-to-use software environment. With Visual MODFLOW Flex, groundwater modelers have all the tools required for addressing local to regional-scale water quality, groundwater supply, and source water protection issues.
Visual Modflow Flex tutorial for beginners
Be Familiar with the visual modflow flex through this tutorial and creating a conceptual model, and learn to import data to visual modflow flex
Waterloo Hydrogeologic Inc. was founded in 1989. The company's line of business includes providing computer programming services. Woburn, MA March 13, 2015 – Nova Metrix LLC (“Nova Metrix”) is pleased to announce the acquisition of Schlumberger Water Services Technology Group, which is comprised of Van Essen Instruments (Diver Brand), Westbay Instruments, and Waterloo Hydrogeologic, which were formerly part of the water monitoring division of Schlumberger Water Services. Waterloo Hydrogeologic (currently operates under the legal name Nova Metrix Ground Monitoring (Canada), Ltd. Waterloo Hydrogeologic Division) continues to develop new programs to meet the advancing needs and technology requirements of the groundwater industry. We now offer four main software packages; Visual MODFLOW Flex, Hydro GeoAnalyst, AquaChem, and AquiferTest.
Owner: Waterloo Hydrogeologic
Product Name: Visual MODFLOW Flex
Version: 11.0 Build 11.0.2.52854
Supported Architectures: x64
Website Home Page : www.waterloohydrogeologic.com
Languages Supported: english
System Requirements: Windows *
Size: 2.1 Gb
Waterloo Hydrogeologic Visual MODFLOW Flex 11.0
Please visit my blog
Added by 3% of the overall size of the archive of information for the restoration
No mirrors please
![Waterloo Hydrogeologic Visual MODFLOW Flex 11.0]()
Added by 3% of the overall size of the archive of information for the restoration
No mirrors please
Waterloo Hydrogeologic Visual MODFLOW Flex 11.0
