Tekla Structural Design Suite 2020
Tekla Structural Design Suite 2020 | 1.0 Gb
Trimble introduced the latest versions of its Tekla software solutions for advanced Building Information Modeling (BIM), structural engineering and steel fabrication management—Tekla Structural Designer Suite 2020. The only suite an engineer performing structural analysis and calculations will need.
Tekla Structural Design Suite a new bundled product including Tedds and Tekla Structural Designer and accessed using cloud licensing. Providing better value choices to customers and allowing them to take advantage of new product integrations.
Tekla Structural Designer 2020 release notes
Issues with Associated Bulletins
- [TSD-6440] - Snow Loading - US Head Code & ASCE 7-2016 - for Roof Projection and Parapet Snow Drift loads to Cl.7.8 of ASCE7-16, the Importance factor value was used directly in the calculation of the drift height hd rather than its square root per the equation of Figure 7.6-1. This could produce unconservative drift load values for some risk categories. For more information please see: Product Bulletin PBTSD-2003-1.
. This issue is addressed in this release.
General & Modelling
- New Lateral Force Resisting System Wall Type - Shear Only Wall
- Enhanced Grasshopper Link for Live Parametric Modeling and Analysis
- New Beam End Partial Fixity
- Improved Selection & Editing and Level Creation at a Point
Loading
- Load Combination Generator - enhanced with intelligent generation of default combinations
- New Diaphragm Load type - allows application of single lateral and torsion loads to diaphragms
Analysis & Results
- Analysis & Design Process - automatic termination when extremely large deflections occur
- New Review-View Control of Cracked/Uncracked Setting for Concrete Members
- New 2D In-Plane Stress Contouring useful for assessing extent of cracking of Concrete Walls
Design
- Steel Simple Connection Resistance Check - Significantly enhanced with new database of Standard Connections
- Concrete Design - Result Line Design saving of reinforcement and manual design forces
- Seismic Analysis & Design Enhancements
BIM Integration
- New Trimble Connect Integration Link
- New Integration with ETABS
- New Tekla Open API
Other
- Minor Enhancements and Fixes
- [TSD-6440] - Snow Loading - US Head Code & ASCE 7-2016 - for Roof Projection and Parapet Snow Drift loads to Cl.7.8 of ASCE7-16, the Importance factor value was used directly in the calculation of the drift height hd rather than its square root per the equation of Figure 7.6-1. This could produce unconservative drift load values for some risk categories. For more information please see: Product Bulletin PBTSD-2003-1.
. This issue is addressed in this release.
General & Modelling
- New Lateral Force Resisting System Wall Type - Shear Only Wall
- Enhanced Grasshopper Link for Live Parametric Modeling and Analysis
- New Beam End Partial Fixity
- Improved Selection & Editing and Level Creation at a Point
Loading
- Load Combination Generator - enhanced with intelligent generation of default combinations
- New Diaphragm Load type - allows application of single lateral and torsion loads to diaphragms
Analysis & Results
- Analysis & Design Process - automatic termination when extremely large deflections occur
- New Review-View Control of Cracked/Uncracked Setting for Concrete Members
- New 2D In-Plane Stress Contouring useful for assessing extent of cracking of Concrete Walls
Design
- Steel Simple Connection Resistance Check - Significantly enhanced with new database of Standard Connections
- Concrete Design - Result Line Design saving of reinforcement and manual design forces
- Seismic Analysis & Design Enhancements
BIM Integration
- New Trimble Connect Integration Link
- New Integration with ETABS
- New Tekla Open API
Other
- Minor Enhancements and Fixes
General & Modelling
- New Lateral Force Resisting System Wall Type - Shear Only Wall
- Enhanced Grasshopper Link for Live Parametric Modeling and Analysis
- New Beam End Partial Fixity
- Steel Beams - New Section Database of Peikko DELTABEAM beams
- Improved Selection & Editing and Level Creation at a Point
Loading
- New Diaphragm Load type - allows application of single lateral and torsion loads to diaphragms
Analysis & Results
- Analysis & Design Process - automatic termination when extremely large deflections occur
- New Review-View Control of Cracked/Uncracked Setting for Concrete Members
- New 2D In-Plane Stress Contouring useful for assessing extent of cracking of Concrete Walls
Design
- Steel Simple Connection Resistance Check - Significantly enhanced with new database of Standard Connections
- Steel - New Fire Resistance Check
- Steel - New Design for High Shear in Combined Bending & Axial Check
- Concrete - Result Line Design saving of reinforcement and manual design forces
- New Precast Concrete Member design via Tekla Tedds 2020 Integration
- New option for presumed bearing capacity method for Mat Foundation
BIM Integration
- New Trimble Connect Integration Link
- New Bi-directional FBEAM® Link for design of FABSEC® Beams
- New Integration with ETABS
- New Tekla Open API
Other
- Minor Enhancements and Fixes
- New Lateral Force Resisting System Wall Type - Shear Only Wall
- Enhanced Grasshopper Link for Live Parametric Modeling and Analysis
- New Beam End Partial Fixity
- Steel Beams - New Section Database of Peikko DELTABEAM beams
- Improved Selection & Editing and Level Creation at a Point
Loading
- New Diaphragm Load type - allows application of single lateral and torsion loads to diaphragms
Analysis & Results
- Analysis & Design Process - automatic termination when extremely large deflections occur
- New Review-View Control of Cracked/Uncracked Setting for Concrete Members
- New 2D In-Plane Stress Contouring useful for assessing extent of cracking of Concrete Walls
Design
- Steel Simple Connection Resistance Check - Significantly enhanced with new database of Standard Connections
- Steel - New Fire Resistance Check
- Steel - New Design for High Shear in Combined Bending & Axial Check
- Concrete - Result Line Design saving of reinforcement and manual design forces
- New Precast Concrete Member design via Tekla Tedds 2020 Integration
- New option for presumed bearing capacity method for Mat Foundation
BIM Integration
- New Trimble Connect Integration Link
- New Bi-directional FBEAM® Link for design of FABSEC® Beams
- New Integration with ETABS
- New Tekla Open API
Other
- Minor Enhancements and Fixes
General & Modelling
- New Lateral Force Resisting System Wall Type - Shear Only Wall
- Enhanced Grasshopper Link for Live Parametric Modeling and Analysis
- New Beam End Partial Fixity
- Improved Selection & Editing and Level Creation at a Point
Loading
- New Diaphragm Load type - allows application of single lateral and torsion loads to diaphragms
Analysis & Results
- Analysis & Design Process - automatic termination when extremely large deflections occur
- New Review-View Control of Cracked/Uncracked Setting for Concrete Members
- New 2D In-Plane Stress Contouring useful for assessing extent of cracking of Concrete Walls
Design
- Concrete - Result Line Design saving of reinforcement and manual design forces
BIM Integration
- New Trimble Connect Integration Link
- New Integration with ETABS
- New Tekla Open API
Other
- Minor Enhancements and Fixes
- New Lateral Force Resisting System Wall Type - Shear Only Wall
- Enhanced Grasshopper Link for Live Parametric Modeling and Analysis
- New Beam End Partial Fixity
- Improved Selection & Editing and Level Creation at a Point
Loading
- New Diaphragm Load type - allows application of single lateral and torsion loads to diaphragms
Analysis & Results
- Analysis & Design Process - automatic termination when extremely large deflections occur
- New Review-View Control of Cracked/Uncracked Setting for Concrete Members
- New 2D In-Plane Stress Contouring useful for assessing extent of cracking of Concrete Walls
Design
- Concrete - Result Line Design saving of reinforcement and manual design forces
BIM Integration
- New Trimble Connect Integration Link
- New Integration with ETABS
- New Tekla Open API
Other
- Minor Enhancements and Fixes
General & Modelling
- New Lateral Force Resisting System Wall Type - Shear Only Wall
- Enhanced Grasshopper Link for Live Parametric Modeling and Analysis
- New Beam End Partial Fixity
- Improved Selection & Editing and Level Creation at a Point
Loading
- Load Combination Generator - enhanced with intelligent generation of default combinations
- New Diaphragm Load type - allows application of single lateral and torsion loads to diaphragms
- Wind Wizard for Indian Head Code Updated to IS 875 (Part 3) : 2015
Analysis & Results
- Analysis & Design Process - automatic termination when extremely large deflections occur
- New Review-View Control of Cracked/Uncracked Setting for Concrete Members
- New 2D In-Plane Stress Contouring useful for assessing extent of cracking of Concrete Walls
Design
- Steel Design - New Design of Plated Beam and Columns for the Indian Head Code
- Concrete Design - Result Line Design saving of reinforcement and manual design forces
- New Design Warning Controls - Indian Head Code
BIM Integration
- New Trimble Connect Integration Link
- New Integration with ETABS
- New Tekla Open API
Other
- Minor Enhancements and Fixes
- New Lateral Force Resisting System Wall Type - Shear Only Wall
- Enhanced Grasshopper Link for Live Parametric Modeling and Analysis
- New Beam End Partial Fixity
- Improved Selection & Editing and Level Creation at a Point
Loading
- Load Combination Generator - enhanced with intelligent generation of default combinations
- New Diaphragm Load type - allows application of single lateral and torsion loads to diaphragms
- Wind Wizard for Indian Head Code Updated to IS 875 (Part 3) : 2015
Analysis & Results
- Analysis & Design Process - automatic termination when extremely large deflections occur
- New Review-View Control of Cracked/Uncracked Setting for Concrete Members
- New 2D In-Plane Stress Contouring useful for assessing extent of cracking of Concrete Walls
Design
- Steel Design - New Design of Plated Beam and Columns for the Indian Head Code
- Concrete Design - Result Line Design saving of reinforcement and manual design forces
- New Design Warning Controls - Indian Head Code
BIM Integration
- New Trimble Connect Integration Link
- New Integration with ETABS
- New Tekla Open API
Other
- Minor Enhancements and Fixes
General & Modelling
- New Lateral Force Resisting System Wall Type - Shear Only Wall
- Enhanced Grasshopper Link for Live Parametric Modeling and Analysis
- New Beam End Partial Fixity
- Improved Selection & Editing and Level Creation at a Point
Loading
- New Diaphragm Load type - allows application of single lateral and torsion loads to diaphragms
Analysis & Results
- Analysis & Design Process - automatic termination when extremely large deflections occur
- New Review-View Control of Cracked/Uncracked Setting for Concrete Members
- New 2D In-Plane Stress Contouring useful for assessing extent of cracking of Concrete Walls
Design
- Concrete Design - Result Line Design saving of reinforcement and manual design forces
- Foundation Design - New Pile Cap Design for Australian Head Code to AS 3600 : 2009
BIM Integration
- New Trimble Connect Integration Link
- New Integration with ETABS
- New Tekla Open API
Other
- Minor Enhancements and Fixes
- New Lateral Force Resisting System Wall Type - Shear Only Wall
- Enhanced Grasshopper Link for Live Parametric Modeling and Analysis
- New Beam End Partial Fixity
- Improved Selection & Editing and Level Creation at a Point
Loading
- New Diaphragm Load type - allows application of single lateral and torsion loads to diaphragms
Analysis & Results
- Analysis & Design Process - automatic termination when extremely large deflections occur
- New Review-View Control of Cracked/Uncracked Setting for Concrete Members
- New 2D In-Plane Stress Contouring useful for assessing extent of cracking of Concrete Walls
Design
- Concrete Design - Result Line Design saving of reinforcement and manual design forces
- Foundation Design - New Pile Cap Design for Australian Head Code to AS 3600 : 2009
BIM Integration
- New Trimble Connect Integration Link
- New Integration with ETABS
- New Tekla Open API
Other
- Minor Enhancements and Fixes
Compatibility
This version is not backwards compatible. When you create or save a model in Tekla Structural Designer 2020, you cannot open it in older versions due to database differences.
Tekla Tedds 2020 release notes
Some features documented below were included in previous updates to Tedds 2019.
- Engineering library (All Regions)
- Engineering library (Eurocode Design)
- Engineering library (British Standard Code Design)
- Engineering library (US Code Design)
- Engineering library (Australia Code Design)
- Tekla Tedds Integrator
- Integration with Tekla Structural Designer
- Trimble Connect
- General enhancements
Tekla Structural Design Suite 2020
Tekla Structural Design Suite 2020
Tekla Structural Designer delivers powerful features for optimizing concrete and steel design, including the ability to quickly compare alternative design schemes, efficiently manage changes and collaborate seamlessly. Regardless of project size or complexity, Tekla Structural Designer's fully automated, productivity-enhancing capabilities enable engineering firms to improve operations, successfully bid more projects and enhance client service.
Tekla Structural Designer 2020 structural analysis and design software introduces data-driven design with a new direct link between Tekla Structural Designer and algorithmic modeling plugin Grasshopper, enabling quick and easy exploration of different early-stage design alternatives.
Modeling has never been easier with Tekla Structural Designer. From modeling in 3D or 2D views, to duplicating levels and several built-in tools, Tekla Structural Designer allows you to quickly model any structure. Watch this short video to learn more about some of the tools that will speed up your modeling time.
Tekla Tedds is powerful software developed to meet the needs of the structural engineering workflow and designed to help you automate your repetitive structural calculations. Choose from one or more of our regularly updated calculation libraries or write your own, and create professional documentation every time. Combine your structural calculations with 2D frame analysis.
Tekla Tedds 2020 structural analysis and design calculation software offers further integration with Tekla Structures and Tekla Structural Designer for convenient design management across both solutions. With enhanced integration, Tekla Tedds calculation can be automatically associated with a variety of Tekla Structures and Tekla Structural Designer objects.
This video demonstrates the Tekla Tedds Integrator for Tekla Structures. The Tekla Tedds Integrator is a Tekla Structures Extension which adds features for linking Tekla Tedds calculations to the objects in a Tekla Structures model. Tedds includes a built-in library of structural engineering calculations which can be used to produce high quality calculation documentation for a wide variety of structural building elements which are compliant with a range of regional design codes. The Tekla Integrator can also be used to link user written custom calculations.
Tekla software solutions for advanced BIM and structural engineering are produced by Trimble. Trimble’s construction offering ranges from total stations to advanced software, giving the industry tools to transform planning, design, construction and operation of buildings. Tekla software is at the heart of the design and construction workflow, building on the free flow of information, constructible models and collaboration.
Product: Tekla Structural Design
Version: 2020 Suite *
Supported Architectures: x64
Website Home Page : www.tekla.com
Language: english
System Requirements: PC **
Supported Operating Systems: **
Size: 1.0 Gb
Tekla Structural Design Suite 2020 Includes:
- Tekla Structural Designer 2020 version 20.0.2.33
- Tekla Tedds 2020 version 22.1.0000
- Tekla Structural Designer 2020 version 20.0.2.33
- Tekla Tedds 2020 version 22.1.0000
Tekla Structural Designer 2020 hardware recommendations.
System requirements for effective operation
CPU: Multi core Intel i5 Series or above, Xeon or AMD equivalent
- Highest affordable performance recommended.
Memory: 16GB (32GB or more recommended)
- Memory requirements are highly dependent on model content.
OS: 64-bit Microsoft Windows 8.1 / 10
- Operating systems must be running the latest service packs / updates.
Graphics: 1600 x 900 resolution (1920 x 1080 or higher recommended)
- 1GB or higher of dedicated RAM.
- Utilizes HOOPS Visualize, a third party graphics engine available from Tech Soft 3D. To check your adapter’s compatibility visit the HOOPS developer website for HOOPS 20.x, DirectX and OpenGL requirements.
Disk space: 1GB or more of free space for installation
- Operational disk space requirements are highly dependent on model content.
Internet connection: Required for access to Online Services and some documentation.
License Service:
- Tekla Structural License Service 3.00 including Sentinel RMS 9.5
License Server: The latest version of the Tekla Structural Licence Service, at time of release, is shipped and installed with the software. If you have chosen to have a separate licence server, it is always our recommendation that you also run the latest version of the Tekla Structural License Service on it to ensure compatibility. Please see System Requirements for specific version details.
Test environments
The application is tested and supported on the following business versions of Microsoft Windows with the latest updates applied:
- Windows 10 64-bit
- Windows 8.1 64-bit
Tekla Tedds 2020 hardware recommendations:
CPU: Multi core Intel i3 Series or above, Xeon or AMD equivalent
- Highest affordable performance recommended.
Memory: 2GB
- Memory requirements are dependant on document content.
OS: 32-bit or 64bit Microsoft Windows 8.1 / 10
- Operating systems must be running the latest service packs / updates.
- See Test Environments (below) for full details of supported operating systems.
Graphics: 1920 x 1080 resolution
- 1GB or higher of dedicated RAM.
Disk space: 1GB or more of free space for installation.
- Operational disk space requirements are highly dependant on model content.
Internet connection: Required for access to Online Services and some documentation.
Microsoft Word: 32-bit or 64-bit of Microsoft Word 2013, 2016 or 2019.
- Microsoft Word needs to be fully service packed.
License Service:
- Tekla Structural License Service 3.00 including Sentinel RMS 9.5
License Server: The latest version of the Tekla Structural Licence Service, at time of release, is shipped and installed with the software. If you have chosen to have a separate licence server, it is always our recommendation that you also run the latest version of the Tekla Structural License Service on it to ensure compatibility. Please see System Requirements for specific version details.
The application is tested and supported on the following business versions of Microsoft Windows with the latest updates applied:
- Windows 10 32-bit & 64-bit
- Windows 8.1 32-bit & 64-bit
System requirements for effective operation
CPU: Multi core Intel i5 Series or above, Xeon or AMD equivalent
- Highest affordable performance recommended.
Memory: 16GB (32GB or more recommended)
- Memory requirements are highly dependent on model content.
OS: 64-bit Microsoft Windows 8.1 / 10
- Operating systems must be running the latest service packs / updates.
Graphics: 1600 x 900 resolution (1920 x 1080 or higher recommended)
- 1GB or higher of dedicated RAM.
- Utilizes HOOPS Visualize, a third party graphics engine available from Tech Soft 3D. To check your adapter’s compatibility visit the HOOPS developer website for HOOPS 20.x, DirectX and OpenGL requirements.
Disk space: 1GB or more of free space for installation
- Operational disk space requirements are highly dependent on model content.
Internet connection: Required for access to Online Services and some documentation.
License Service:
- Tekla Structural License Service 3.00 including Sentinel RMS 9.5
License Server: The latest version of the Tekla Structural Licence Service, at time of release, is shipped and installed with the software. If you have chosen to have a separate licence server, it is always our recommendation that you also run the latest version of the Tekla Structural License Service on it to ensure compatibility. Please see System Requirements for specific version details.
Test environments
The application is tested and supported on the following business versions of Microsoft Windows with the latest updates applied:
- Windows 10 64-bit
- Windows 8.1 64-bit
Tekla Tedds 2020 hardware recommendations:
CPU: Multi core Intel i3 Series or above, Xeon or AMD equivalent
- Highest affordable performance recommended.
Memory: 2GB
- Memory requirements are dependant on document content.
OS: 32-bit or 64bit Microsoft Windows 8.1 / 10
- Operating systems must be running the latest service packs / updates.
- See Test Environments (below) for full details of supported operating systems.
Graphics: 1920 x 1080 resolution
- 1GB or higher of dedicated RAM.
Disk space: 1GB or more of free space for installation.
- Operational disk space requirements are highly dependant on model content.
Internet connection: Required for access to Online Services and some documentation.
Microsoft Word: 32-bit or 64-bit of Microsoft Word 2013, 2016 or 2019.
- Microsoft Word needs to be fully service packed.
License Service:
- Tekla Structural License Service 3.00 including Sentinel RMS 9.5
License Server: The latest version of the Tekla Structural Licence Service, at time of release, is shipped and installed with the software. If you have chosen to have a separate licence server, it is always our recommendation that you also run the latest version of the Tekla Structural License Service on it to ensure compatibility. Please see System Requirements for specific version details.
The application is tested and supported on the following business versions of Microsoft Windows with the latest updates applied:
- Windows 10 32-bit & 64-bit
- Windows 8.1 32-bit & 64-bit
Please visit my blog
Added by 3% of the overall size of the archive of information for the restoration
No mirrors please
![Tekla Structural Design Suite 2020]()
Added by 3% of the overall size of the archive of information for the restoration
No mirrors please
Tekla Structural Design Suite 2020
