Siemens PLM NX 10.0.3 MP15 Update

7526639 Postprocessor for DMIS 3 (aka Inspector) needs to account for re-measure
7573329 Error - An embedded object cannot be deleted in isolation when loading assembly
7660163 Wrong result with DXF-Export
7726657 DMIS 3.0 Post processor allows invalid characters in names
7728187 CMM Inspection allows names with dashes that will be rejected by Inspector
7740601 Report inside NXCMM shows the part Passed but report shows Failed
7797351 tessUG.config setting layerOFF does not work when UGII_GENERATE_MULTI_CAD_JT=1 is set
7798597 Sub assembly fails to open with parent assembly
7801403 CAM NX10 - PointToPoint allowed selection causing NX to stop responding
7802290 When I translate to DXF from Draft part, the dimension is not correct.
7802737 Assembly loading error - UPDATE/DELETE has gone through too many iterations
7806689 Assembly Constraint failed if coordinate systems selected.
7807450 An MCS cannot position to an WCS
7807550 Constraint creation between deformed datum co-ordinate system and geometry from assembly part fails.
7820388 Thin Shell Mass using Curves and sheets gives incorrect mass value for kg-mm
7855077 Memory access violation when loading all components fully
7885230 Internal error when using the function MOM_load_definition_file in the TCL file
7903862 When creating a point feature using Point of Face point does not get projected
7913883 Excel Automation Error when editing Tabular Note using Spreadsheet
7915817 Error opening assembly - UPDATE/DELETE has gone through too many iterations
7916724 Part Attribute cannot be deleted, hidden cached reference.
7928885 Import Assembly into Teamcenter failure
7932844 Some Edge Point surface normal directions have reversed vectors
7933507 Wire EDM missed LOAD-UNLOAD Wire Events
7933803 Wrong moments of inertia values on analysis.
7935536 Excel Automation Error when editing Tabular Note using Spreadsheet
7937032 CAM NX10 - Hole Making - Machining Features causing Replace Component Memory Access Violation
7938050 Excel Automation Error when editing Tabular Note using Spreadsheet
7942667 CAM: memory access violation when clicking on operation
7952801 Excel Automation Error when editing Tabular Note using Spreadsheet
7953492 Excel Automation Error when editing Tabular Note using Spreadsheet
7953749 Internal Error: Invalid Solid Object Tag when closing part files
7955310 Machining Knowledge Editor does not support vector and point UDE attribute
7956246 STEP214 Export with PMI fails with IM0522 Unhandled exception
7957899 Error Failed to get column value for column DB_PART_NAME_EN expanding ANT
7961253 While simulating a probe path execution stops with no error message
7962642 “Tool path event is not of the correct type” exception
7964942 Internal Error when closing drawing
7965470 Critical Error when trying to put a path on an Edge Point feature
7966503 General Fault Exception when using MOM_load_definition_file
7971696 Error while opening drafting files in NX
7977230 Error: A dimension subscript for an array attribute was out of range
7977781 X Y and Z not populating using electrode design
7980124 Fix at current time stamp with wave geometry linker does not work correctly
7980183 JT CAD_MASS/CAD_VOLUME is different from NX MASS/VOLUME
7992932 Probe Point fails to post correctly in MP13 with Local MCS
7995644 CAM: memory access violation when clicking on operation
7998078 Exception occurred with error message “Tool path event index is out of range”
7998311 Threaded holes in wave linked body are not updated.
8005310 The button Edit Section is unavailable during tool path simulation
8006158 Ejector Pin length is not correct for CATALOG_LENGTH
8324935 Error - An embedded object cannot be deleted in isolation when loading assembly
8325101 PDF Export with Variable UGII_PDF_ACROBAT_VERSION=1.5 doesn’t work
8328523 Internal Error when opening an NX assembly from Teamcenter, set partial loading
8328637 memory access violation when clicking on Lathe Machine Control Operation
8329568 CAM: memory access violation when clicking on operation
8333175 CAM: memory access violation when clicking on operation
8801335 CAM: memory access violation when clicking on operation
8806816 Encounter “Tool path event is not of the correct type” error
8807545 Can’t create Assembly Constraints error - UPDATE/DELETE has gone through too many iterations
8808298 Assembly loading error - UPDATE/DELETE has gone through too many iterations
8810171 An operation was attempted on an invalid or unsuitable OM object reopen assembly