Siemens NX 2406 Build 1700 (NX 2406 Series)

NX CAM software features important enhancements based on the feedback from our users. Below we are highlighting the new capabilities that can help you be more efficient.

3D adaptive roughing, the high-speed machining strategy in NX CAM is now even more flexible, allowing programmers to determine the tool path start location to predrilled locations for safe tool engagement at high speeds.


With the new Start Drill Point feature, you can easily specify the area for the start point and the system automatically determines the exact start point based on the operation parameters. When specifying pre-drill points, you can now pre-drill a pocket to its floor. This allows the tool to plunge directly to the cutting level without a helical entry move, saving tool life and reducing overall machining time.

The Holemaking operation now offers improved control of non-cutting moves (both within and between features), more robust local gouge checking, and quicker tool path calculation time.


The Transfer using Engage and Retract option enhances control over toolpaths between cutting levels by replacing rapid motion with step-over types, ensuring controlled feedrates and safe transitions. Using the Relative Plane option, you can optimize transfer motions between hole features in a pocket, prioritizing safety. Additionally, you can adjust distances using the Lowest Rotary feature to minimize gaps between hole features and nearby collision geometries. Extend tool life, improve surface quality, and ensure effective chip evacuation by enabling the Chip Removal Option.


The new none-cutting moves options for Hole/Boss Mill provide greater control over the toolpath within a machined feature. This results in better tool life, improved swarf evacuation, and enhanced part quality. These options are available for Hole Milling, Boss Milling, Thread Milling, Thread Boss Milling, and Groove Milling.


The Cloud Connect Tool Manager, a capability for efficient management of tools and machining data, has been significantly improved. It now offers enhanced data management, simplified tool holder creation, and direct access to multiple tool vendor catalogs within the application.


Improvements to the Cloud Connect Tool Manager include an intuitive interface for managing multiple sets of machining data associated with the tools. For instance, you can easily specify the part material, cutting parameters, helical engagement settings, and feedrates. The predefined tool machining data streamlines the CNC programming.


Machining data is now directly linked to each tool, allowing easy management of machining setting. Cloud Connect Tool Manager, which previously supported only a single set of machining data per tool, now allows multiple sets for greater flexibility. The new preset option enables you to automatically retrieve cutting parameters based on criteria like part material and cutting method settings. The holder creation process has been streamlined using modern interface and fast import of data from cutting tool catalogues. Using the enhanced import functionality you can now read holders, enabling a seamless and intuitive import process from various tool vendor catalogues, including SECO and Walter Tools.

Machine Powered Programming is an innovative feature that transforms CNC programming. You can program while using a digital replica of the machine tool and its kinematics. This method offers a fresh and more efficient programming experience.


Programming complex jobs has never been simpler. You can gain constant access to the machine’s capabilities, which are now integrated into the programming process, making it more intuitive. This technology not only guides programmers to make the right decisions but also reduces the need for repeated simulation. This new programming method allows faster programming and improved toolpath quality. Real Part Cut off After IPW transfer: The latest enhancement significantly improves the simulation accuracy for certain operations. Before, when the in-process workpiece (IPW) was divided into multiple parts during operations like turning cut off, the disconnected segments would remain in place in the simulation. This often led to false collision warnings.


Now, segments that would fall away in a real-world scenario are simulated to do so in the simulation, reducing unnecessary collision alerts and providing a more accurate depiction of what to expect during actual production, enhancing overall efficiency and safety.

The upcoming version of NX Additive Manufacturing provides new enhancements to the users in multi-axis and fixed plane capabilities.

A sub-nester has been added to group and nest small fragile parts as a pre-nester before creating sinterboxes. Additionally, brush facet selection makes it easier to define support regions on faceless convergent bodies, and there are multi-laser path preview enhancements for the Build Processor on EOS machines.


Flexibility in build widths has improved with the option to create multiple beads in planar thinwall, as opposed to previous versions that deposited a single bead per layer. Users can now create parts with thicker walls using a user-specified offset value. Additionally, users can use a ramping strategy between layers and an inside-out to outside-in cut pattern, allowing for a continuous bead. This is compatible with the profile slicing option but not with the Helix option. Build styles have been revamped with enhanced database access, enabling customization of individual operation components for user-specified Process Parameters. Creating basic build rules is now simpler, and applying custom process parameters to them is more streamlined. Users can achieve successful builds on the first attempt by employing varied parameters for different operation sections, such as Finish Passes, Infill Passes, and Spring Passes, based on the output type.


This update offers increased flexibility in controlling process parameters across all operation aspects. NX now allows you to use multiple offset beads in planar additive thin-wall operations, which reduces the need to model auxiliary manufacturing geometry and new build styles and build rules. In addition, NX gives you a way to capture and control machine and material specific process parameters, known as the “secret sauce,” for portions of a multi-axis additive operation. Custom process parameters can be assigned to special attributes of output types, such as Helix Top/Bottom and Stepovers, for specific cases or unique requirements. You can now have the flexibility to dive deeper into assigning these parameters, when necessary, although it is not mandatory for general use.


The latest enhancements introduce improved visual representation of angled supports relative to the build platform or part geometry through color coding. This feature helps users quickly identify and manage supports positioned at angles, which require specific considerations for ensuring proper support and structural integrity during additive manufacturing.


This enhancement allows users to promptly identify printability issues and make immediate adjustments to support structures, ensuring all supports meet necessary criteria for successful printing. By providing color-coded feedback, the software enhances precision and efficiency in support generation, giving users greater control over creating and adjusting supports for reliable printing outcomes. NX offers enhanced control over mesh quality for parts on the build tray, providing a variety of Print Resolutions to suit different levels of detail and processing needs. The available options include Coarse, Standard, Fine, Extra Fine, Ultra Fine, and User Defined, with Fine set as the default resolution.


The latest update enhances control over mesh quality for parts on the build tray, offering various Print Resolutions to meet different levels of detail and processing needs. This improves the accuracy of printed parts by allowing users to define and adjust mesh properties through the Mesh Properties dialog. You can specify facet quality using options such as Distance Tolerance, Angle Tolerance, Max Facet Width, and Max Chord Length.

NX CAM On-Machine Probing now has advanced capabilities that allow programmers to configure and capture parameters for streamlined process optimization and reuse of best practices.

The latest enhancements improve user workflow and increase programming speed. On-machine probing now automatically generates the toolpath each time a probing cycle is selected, or parameters are modified, eliminating the need for manual efforts. Toolpath animation is also continuously accessible now.


Considering the growing number of cycles and supported controls, the latest version introduces continuous improvements and optimizations to enhance manufacturing accuracy and efficiency. Updates include various features, adjustments, and fixes specifically designed for Sinumerik and Heidenhain controls. Initial implementations are focused on Renishaw I+ cycles for Sinumerik, but look out for future integrations with Fanuc, Okuma, and Haas controls through PostHub.


Presetting capabilities are also available ensuring that all parameter options can now be preset in a central setting file. Settings can be customized based on defined conditions, streamlining setup and optimization. Users can filter and sort measurement cycles to match specific machine/controller configurations or a generic machine setup, ensuring precise adaptation to various operating environments. A significant enhancement is the new control of tracking points for toolpath calculation, offering flexibility through machine-side calibration. This allows users to select either the probe tip or probe center for calculation purposes.


A new Post Processor add-on has been developed for both Post Builder and TCL-based solutions, serving as a bridge. This allows users to continue using their familiar environment while gradually transitioning to the upgraded Post Configurator. It ensures compatibility with legacy post-processing solutions and guarantees long-term support and compatibility with future versions of NX CAM.

NX’s part manufacturing data management has seen significant improvements, enhancing the organization and control of manufacturing process data within the software. These updates streamline workflows, improve efficiency, and uphold data integrity throughout the manufacturing process.

New enhancements have been added to the Manufacturing Resource Library (MRL) in Teamcenter, enabling easy management of manufacturing resources such as machines, fixtures, and cutting tools.


With direct access from NX through a dedicated Ribbon tab for MRL, you can now prepare manufacturing resources in Teamcenter, whether through Teamcenter RAC or the new web-based interface in Active Workspace. Latest updates include access to functions such as checking NX CAM Tool Retrieve for tool compatibility with NX CAM, preparing tool assembly to create NX assembly part files integrated with NX Assembly/MTB, extracting holder data for analyzing tool holder geometry integrated with MX CAD/NX CAM, and generating setup sheets directly within NX using integration with NX Drafting. With Machining Data Library in the MRL module, managing technology data like Feeds & Speeds data tables is now enhanced through the Teamcenter web user interface. This provides a streamlined method to look up machining details, search for technology data, reference properties, and assign resources to attributes.


The intuitive interface facilitates quick access and assignment of accurate data. The Machining Data Library includes three main classes for managing technology records:
- Feeds & Speeds data tables
- Machining Data linked to specific machines
- Tool Machining Data for additional cutting tool references.
CMM resource management has been enhanced in the latest version, making it easier to manage probing tools, coordinate-measuring machines, and related devices. This includes operations such as classifying and preparing inspection machines, devices, accessories, probing assemblies, and measuring systems and components.


Detailed instructional videos are available in the Manufacturing Resource Library, offering background information and technical tips on defining and preparing these resources, helping users effectively manage CMM resources.

The new reporting view in NX Assembly Line Planner enables users to create reports featuring visual representations of crucial line data. This includes visualizations of the product at various stages of assembly and the resources employed throughout the production process. Users can incorporate additional details, such as tables listing resource types and their power usage. Administrators can effortlessly generate report templates in .pdf, .html, or .pptx formats based on the application’s data, and manage them centrally in Teamcenter without requiring NX customization or programming expertise. This feature empowers users to generate reports to track planning milestones effectively.


With the introduction of the new high-level Gantt view and enhanced ability to manage flows between operations across different stations, cross-station process planning in Assembly Line Planner has been streamlined.


This allows planners to create detailed process definitions for manufacturing lines more effectively, particularly when planning operations that utilize shared resources across stations. You can now easily create, update, and delete flows between operations in different stations, while also accessing current and target takt times in the PERT view.


For better representation of product build-up, enhancements to the PERT view in Assembly Line Planner improve clarity. Incoming products are color-coded differently with added transparency to emphasize newly assigned items. Additionally, images now capture entire line nodes, including sublines within the loaded scope.

NX Line Designer’s Load performance has seen a significant improvement, with load speeds now 87% faster compared to previous NX versions. This enhancement addresses the primary user requirement for efficient load times, optimizing performance in both native and managed modes. You can now seamlessly load additional data as needed during their interactions.


With enhanced support for minimal load now available in both native and managed modes, the loading process has been optimized. In native mode, only parts with connectors and their immediate parent nodes are loaded minimally. In managed mode, parts with kinematics are partially loaded, while part family members are fully loaded.


The user experience has been enhanced with the new 2D Shadow Outline feature in NX Line Designer, which refines the visual representation of objects through improved outlines and shadows. This increases visibility during the design of production lines or layouts. You can now quickly generate 2D representations of entire equipment or sub-assemblies by selecting content from either the Navigator or directly from the Graphic Window. The latest 2D Shadow Outline command streamlines the process of creating outlines, allowing users to generate them for entire assemblies or selected content designated as a Reference Set. Advanced options such as adding and customizing text properties—including color, font style, and height—have also been added, to efficiently complete the authoring process in a single session. Additional resources have been integrated into the Line Designer library. The new Factory Resource Library is available on the Support Center under NX additional downloads. It includes resources from categories like Architectural, CNC Machines, Industrial, Material Handling, Robots, Vehicles, and Workers for both Inch and Metric units.

Fixed_Release,PR,Short_Description,Application,Function,Subfunction,,,
P2406,1635881,Usage of User Exits with NX Open must be documented,SYSENG,NXOPEN,.NET,,,
P2406,1895620,Hidden Lines Removal doesnt display expected results in views,DRAFTING,DRAWING/VIEW,PARASOLID,,,
P2406,6128654,Horizon lines missing in missing wireframe,DRAFTING,DRAWING/VIEW,PARASOLID,,,
P2406,8460003,"\R\"" value is strange in Toolpath NC data.""",CAM,PLANAR_MILLING,OTHER,,,
P2406,8465758,CAMObject.GetIntegerValue fails on missing parameter index 341 2D Single Profile,CAM,PLANAR_MILLING,OTHER,,,
P2406,8468588,MKE Conditional oper.Geometry_Roles,CAM,FEATURE_BASED,KNOWLEDGE_EDITO,,,
P2406,8479953,No geometry is exported when exporting to STEP.,TRANSLATOR,STEP_AP203,IMPORT_GEOMETRY,,,
P2406,8645684,Sketch edit failure ('The change failed' returned),DESIGN,SKETCHER,VTK_SOLVER,,,
P2406,8647579,Remember tool display setting in toolpath animation,CAM,BASIC_FUNCTIONS,UNDETERMINED,,,
P2406,8653500,"Both subtract and trim body fail in case of \bodies in group\"" as target if chang""",DESIGN,SELECT_INTENT,BODY,,,
P2406,8678760,Behavior Change of Engage/Retract with NX2212,CAM,GUIDING_CURVE,VARIABLE_AXIS,,,
P2406,8682783,Part Loading Performance Issue in Test Model,ARCHITECTURE,OM,LOAD,,,
P2406,8685769,Request for addtion to documentation,SYSENG,DOCUMENTATION,ALL,,,
P2406,8688396,TDP - Alphanumeric in Custom Symbol moves at Published 3D PDF,PMI,PLMXML,ALL,,,
P2406,8689348, the top area of less cutting,CAM,MULTIAXIS_ROUGH,ALL,,,
P2406,8689570,Tube finish operation :error in external library,CAM,TUBE_MILLING,FINISHING,,,
P2406,8690492,Regression: Cannot save a defined Symbol In Japanese env.,KDA,DIAGRM_FRAMEWRK,ARCHITECTURE,,,
P2406,8691100,Sketcher solver works with full circle but fails when circled is trimmed.,DESIGN,SKETCHER,VTK_SOLVER,,,
P2406,8692731,Export PDF UI opens wrong documentation page and does not explain Action option,GATEWAY,DOCUMENTATION,ALL,,,
P2406,8693309,copy/paste sketch error: no back link was found corresponding to forward link,DESIGN,SKETCHER,UNDETERMINED,,,
P2406,8693908,Reference Geometry Scaling Affected by Drafting View,KDA,NX_DIAGRAMMING,DESIGN,,,
P2406,8694854,"Plate Preparation is not working, get \Invalid feature parameters\"" error""",NX_SHEET_METAL,FLAT_SOLID,ALL,,,
P2406,8695161,UGMASTER dataset version is increasing incorrectly.,NXMANAGER,FILE_SAVE,PERFORMANCE,,,
P2406,8695693,PS36.0.194. Midsurfacing: Auto Stitch and Trim to Solid Body,DESIGN,FREE_FORM_MODEL,MID_SURFACE,,,
P2406,8696209,NXOpen: Java error while getting the session object,SYSENG,NXOPEN,LICENSING,,,
P2406,8696892,"When export to DWG, some sentences containing GD&T symbols are misaligned.",TRANSLATOR,DXF_DWG,EXPORT_DRAFTING,,,
P2406,8697260,NXMGR: Revision Naming option not available in NX,NXMANAGER,FILE_SAVE_AS,REVISE,,,
P2406,8697489,"Failed to transition plate subsystem due to \memory access violation\"" error""",SHIP_DESIGN,BASIC_DESIGN,TRANSITION,,,
P2406,8697550,Plate subsystem failed to transition due to modeler error,SHIP_DESIGN,BASIC_DESIGN,TRANSITION,,,
P2406,8993412,"Wrong exact representation of a view, while smart LW is ok",DRAFTING,DRAWING/VIEW,PARASOLID,,,
P2406,9335710,FloorWall : Tool Gouge the Part with a Specific Cutting Tolerance,CAM,FLOOR_WALL_MILL,FOLLOW_CUT,,,
P2406,9539038,ER:- Need enhancement of udop Entry Point Subroutine defined in uf_exit.h .,CAM,UFUNC,ALL,,,
P2406,9575793,ER:- Need enhancement of NXOpen.UF > UFPath > CreateLinearMotion(),CAM,UFUNC,ALL,,,
P2406,9613262,"\Feed Rates …\"" menu does not work for user-defined paths""",CAM,USR_DEFINED_OPS,ALL,,,
P2406,9627281,Chamfer - collision detection,CAM,PLANAR_MILLING,PROFILE_CUT,,,
P2406,9673137,Difference in STP importation method,TRANSLATOR,STEP_AP242,IMPORT_ASSEMBLY,,,
P2406,9773147,Chamfer not Recognized for Closed Pocket,CAM,FEATURE_BASED,RULES_OOTB,,,
P2406,9843117,Hole Milling cycle output - operation does not calculate a correct toolpath,CAM,FEATURE_BASED,KNOWLEDGE_EDITO,,,
P2406,9901238,No tool path with collision check in Planar_Profile,CAM,PLANAR_MILLING,PROFILE_CUT,,,
P2406,9918558,Advanced flange on a chain of tangent faces,ADV_SHEET_METAL,ADVANCED_FLANGE,ALL,,,
P2406,9924553,PoorTool Path quality using Part Stock in Guided Curve Surface Contouring,CAM,GUIDING_CURVE,VARIABLE_AXIS,,,
P2406,9925575,step export file with active reference set name as sufix,TRANSLATOR,STEP_AP214,ALL,,,
P2406,9954044,Z-Level Contact Cutcom Issue,CAM,ZLEVEL_MILL,OTHER,,,
P2406,9958791,"Flat Pattern throws \Unable to create body\"" on easy geometry with second blend""",NX_SHEET_METAL,FLAT_SOLID,ALL,,,
P2406,9960798,Unable to Select Faces,SYSENG,SELECTION,HIGHLIGHTING,,,
P2406,9977854,inconsistent CAM template part names cause TC import issues,CAM,TEMPLATES,DEFAULTS,,,
P2406,9985296,reading Step 214 file directly does show solid colors but no surface colors,TRANSLATOR,STEP_AP214,IMPORT_ATTRS,,,
P2406,10010967,Not getting a toolpath until check safe clearance is set to zero. With no chek,CAM,FLOWCUT,SINGLE,,,
P2406,10015798,"The pattern is violated, the tool crosses the part creating the collision.",CAM,ZLEVEL_MILL,OTHER,,,
P2406,10051360,Constant Stepover gives Unexpected ToolPath,CAM,FLOOR_WALL_MILL,FOLLOW_CUT,,,
P2406,10068762,No warning for missing component when loading assembly with interpart data,ASSEMBLIES,WAVE,LD_INTPRT_DATA,,,
P2406,10075946,Feed_Rapid_Output attribute doesn't exist for milling operations in MKE,CAM,FEATURE_BASED,RULES_OOTB,,,
P2406,10081545,Part Modified Indication,DESIGN,EXPRESSION,ALL,,,
P2406,10091061,Teach Mode Profile Move gouges the part,CAM,TURNING,TEACHMODE,,,
P2406,10091325,Cannot turn off persistent and annoying alert for remembered constraints,ASSEMBLIES,ASSEMBLY_MODEL,COMP_ADD,,,
P2406,10094046,"Wrong toolpath ,when NX7.5 operation is regenerated in NX1953",CAM,PLANAR_MILLING,OTHER,,,
P2406,10096473,Contact Point gives Wrong ToolPath and no Gouge has been Detected,CAM,FLOOR_WALL_MILL,FOLLOW_CUT,,,
V2406,10099787,About exporting materials to a library.,CAE,ADV_SIMULATION,MATERIALS,,,
P2406,10148718,"If Customer Defaults \Save JT Data\"" is on then face color is missing after impor""",TRANSLATOR,STEP_AP242,IMPORT_ATTRS,,,
P2406,10158721,"\Arrowhead\"" of \""Imported Feature Control Frame\"" is missed importing STEP242.""",TRANSLATOR,STEP_AP242,ALL,,,
P2406,10162136,Mirroring tracking point of Groove Tools depending on MCS orientation,CAM,TOOLS,TURN_TRACK_PNT,,,
P2406,10164822,Region Sequencing not Optimized the First Time for Floor Wall Operation,CAM,FLOOR_WALL_MILL,OTHER,,,
P2406,10168271,Performance Issue for Collision Checking in NCM,CAM,DRILLING,OTHER,,,
P2406,10178374,"Face colors of the 3D model are missing when importing \STEP242\"" data.""",TRANSLATOR,STEP_AP242,STEP_TO_UG,,,
P2406,10203656,"Need API to set the path to \No cutter path""",CAM,USR_DEFINED_OPS,ALL,,,
P2406,10212394,"[CAD]There is no \Find Clones\"" option in the \""Delete Face\"" dialog.""",DESIGN,DOCUMENTATION,ALL,,,
P2406,10214511,The sketch failed to renew. You cannot change the content of this sketch.,DESIGN,SKETCHER,VTK_SOLVER,,,
P2406,10227080,"Legacy sketch becomes overdefined on selecting \Renew and Edit\"".""",DESIGN,SKETCHER,RENEW,,,
P2406,10227747,Errors on Renew - both parts come from same source part,DESIGN,SKETCHER,RENEW,,,
P2406,10227759,Edit of expression causes a dimension to go conflicting,DESIGN,SKETCHER,UPDATE,,,
P2406,10228006,[CAD]An error occurs when editing the dimensions.,DESIGN,SKETCHER,RENEW,,,
P2406,10241592,No retract motion generated in the last path of PLUNGE_MILLING.,CAM,PLUNGE_MILLING,OTHER,,,
P2406,10244542,Customer Features Attributes gives error when Generate Operation,CAM,FEATURE_BASED,RULES_OOTB,,,
P2406,10244893,Inconsistent tool side behavior when selecting face in Planar Mill ,CAM,PLANAR_MILLING,OTHER,,,
P2406,10246897,Lack of robustness of Boolean operations with convergent bodies,DESIGN,POLYGON_MODEL,LOCAL_OFFSET,,,
P2406,10262869,Some Floor or Wall geometry may not be cut because of Blank Thickness and Stock ,CAM,FLOOR_WALL_MILL,OTHER,,,
P2406,10267158,"Behavior change for \Roll Around\"" Corners""",CAM,PLANAR_MILLING,PROFILE_CUT,,,
P2406,10270783,Next Sketch - Problems with relations,DESIGN,SKETCHER,VTK_SOLVER,,,
P2406,10282017,Tool Collision Avoidance gives unexpected results for Imported Regions ,CAM,SURFACE_CONTOUR,CUT_REGIONS,,,
P2406,10294093,"Gouge Check \Intersect with Part\"" created geometry not as expected""",CAM,TOOL_PATH,FINDINGS,,,
P2406,10296637,Error using Compensation in Zlevel op gives very small move,CAM,ZLEVEL_MILL,OTHER,,,
P2406,10298231,CAM Use_3D_IPW_Update_problem,CAM,WORKPIECE,SETUP,,,
P2406,10300360,The different surroundings of mirrored toolpaths compared to the original,CAM,BASIC_FUNCTIONS,MIRROR,,,
P2406,10320639,FLOOR AND WALL - Missing ToolPath in the Third Area or Pocket,CAM,FLOOR_WALL_MILL,FOLLOW_CUT,,,
P2406,10322142,Floor Wall Mill Operation Calculation Error (fill up memory),CAM,FLOOR_WALL_MILL,FOLLOW_CUT,,,
P2406,10326143,Part is not updating after Renew Sketch and edit expression,DESIGN,SKETCHER,VTK_SOLVER,,,
P2406,10332201,Parentheses of component name are automatically replaced to underscores.,ASSEMBLIES,ASSEMBLY_MODEL,COMP_PROPERTIES,,,
P2406,10333843,Unable to edit drafting crosshatch in assembly drawing view,DRAFTING,DRAWING/VIEW,CROSSHATCH,,,
P2406,10334867,Floor and Wall operation does not cut in order of NCM Region Start Points,CAM,FLOOR_WALL_MILL,NON_CUT_MOVES,,,
P2406,10344883,Collision Check in Planar Profiling leads to uncut areas,CAM,PLANAR_MILLING,PROFILE_CUT,,,
P2406,10350683,Renew sketch OK but create family member failed,DESIGN,SKETCHER,VTK_SOLVER,,,
P2406,10352139,High RAM Usage when Generate Floor/Wall Operation,CAM,FLOOR_WALL_MILL,FOLLOW_CUT,,,
P2406,10355326,Can't edit sketch in file,DESIGN,SKETCHER,RENEW,,,
P2406,10366383,KF Check-Mate mqc_rexp_match mqc_rexp_matchSub fails with Capture Groups,KDA,VALIDATION,CK_INFO,,,
P2406,10379429,Hole Making : Wrong Calculation of the In Process Features,CAM,DRILLING,GEOMETRY,,,
P2406,10389583,CAM IPW Collision through Check Tool Path not found with Solid Assembly,CAM,OPERATION,VALIDITY_STATUS,,,
P2406,10431412,Poor performance when expanding nodes in Routing Reuse Library,ROUTING_GENERAL,REUSE_LIBRARY,CLASSIFICATION,,,
P2406,10431413,"wrong cutting lines with \output contact/tracking data\""""",CAM,FLOOR_WALL_MILL,OTHER,,,
P2406,10444881,Floor-Wall Operation violates Part geometry,CAM,FLOOR_WALL_MILL,OTHER,,,
P2406,10450543,Clearance Plane option within an operation affects main MCS.,CAM,BASIC_FUNCTIONS,MCS,,,
P2406,10463025,Inconsistent behavior of file creation if not available.,SYSENG,UI_COMPONENTS,FILE_BLOCK,,,
P2406,10470851,Generate Contour Profile gives Unexpected ToolPath,CAM,CONTOUR_PROFILE,OTHER,,,
P2406,10486407,Blend robustness changes,SYSENG,UI_COMPONENTS,LIST_BLOCK,,,
P2406,10495240,FBM - Machine Cycle gives Wrong Internal ToolPath for Hole Milling Operation,CAM,FEATURE_BASED,KNOWLEDGE_EDITO,,,
P2406,10502290,Issue while switching from Modelling to Drafting,DESIGN,SKETCHER,VTK_SOLVER,,,
P2406,10507794,The MCS Lathe Work Plane is not Parallel to the Current Tool Work Plane,CAM,TOOLS,TURN_TRACK_PNT,,,
P2406,10507933,PS36.1.130 fix: NX Join hole bug,DESIGN,FEATURE_MODEL,BOOLEAN,,,
P2406,10512921,Various collisions with the part geometry in a floor wall operation,CAM,FLOOR_WALL_MILL,NON_CUT_MOVES,,,
P2406,10529610,Endpoint of PMI linear dimension was created in unintended location.,PMI,DIMENSION,LINEAR,,,
P2406,10531806,Printer Administration > Printers > System Profile UI truncates buttons,GATEWAY,PLOTTING,ALL,,,
P2406,10537203,NXMGR: Unable to delete clone file till NX is exited,NXMANAGER,CLONE_IMPORT,IMPORT_ASSEMBLY,,,
P2406,10541684,Angle-Snap dialog has to be reselected–-prior version hit enter,SYSENG,UI_CONSTRUCTORS,TRANSFORMATION,,,
P2406,10580840,Verify Toolpath causes to scroll top the Operation Navigator,CAM,USER_INTERFACE,ONT,,,
P2406,10581158,Contour returns invalid format for feature type HOLE_FREE_SHAPED_STRAIGHT,CAM,FEATURE_BASED,FEATURE_RECOGNI,,,
P2406,10582249,Cannot obtain object attribute source from Expression by GUI or NXOpen,DESIGN,EXPRESSION,UG/OPEN,,,
P2406,10583939,SALT 2.1: 'Checkin failed feature' occur significantly more often when using sal,SYSTEM,SYSTEM_TOOLS,FLEXLM,,,
P2406,10584741,Symbolic Display of Spherical Coordinate Systems,CAE,ADV_SIMULATION,POST_DISPLAY,,,
P2406,10590998,NXOpen::Session::ApplicationSwitchOnActiveDisplayedPart doesn't work as expected,SYSENG,DOCUMENTATION,NXOPEN_API_REF,,,
P2406,10592604,components are hidden after editing a feature,ASSEMBLIES,ASSEMBLY_MODEL,REPRESENTATION,,,
P2406,10593786,The un-machined material left in the corners by smooth corners for all but the l,CAM,PLANAR_MILLING,OTHER,,,
P2406,10594314,Missing usage information in flexm reporting when using SALTD license vendor dae,SYSTEM,SYSTEM_TOOLS,FLEXLM,,,
P2406,10596624,Next Sketch - Performance bad during finish a sketch,DESIGN,SKETCHER,VTK_SOLVER,,,
P2406,10598696,Python: Exception thrown by GetUserAttribute not handled properly,SYSENG,NXOPEN,PYTHON,,,
P2406,10605352,Guiding Curves - Stock value does not give smooth toolpaths,CAM,GUIDING_CURVE,VARIABLE_AXIS,,,
P2406,10606501,Behavior is different between NX11 and NX2212,ASSEMBLIES,PART_FILE_OPS,FILE_NEW,,,
P2406,10611898,Floor Wall doesn't mill features in a set sequence,CAM,FLOOR_WALL_MILL,OTHER,,,
P2406,10618425,Wrong plunge tool path is generated by MB3 -> Generate.,CAM,PLUNGE_MILLING,OTHER,,,
P2406,10623790,Enables the Classic Create Feature Process ON / OFF - will get different results,CAM,FEATURE_BASED,OPERATION_SELEC,,,
P2406,10624493,Name of bottom contact area is wrong.,CAE,ADV_SIMULATION,MESH_CONTROL,,,
P2406,10628385,Step translation large file,TRANSLATOR,STEP_AP214,ALL,,,
P2406,10630077,"\High Quality Image\"" Command is wrongly available in Customer Defaults""",SYSENG,VISUALIZATION,RAYTRACESTUDIO,,,
P2406,10630120,"When create SB Flange, an edge is created on Flange. this causes some problems.",NX_SHEET_METAL,FLANGE,ALL,,,
P2406,10630470,Step file takes too long to open in NX,TRANSLATOR,STEP_AP242,ALL,,,
P2406,10631544,Feed output is not correct,CAM,POSTCONFIG,ALL,,,
P2406,10632170,"Error \The part can not be cut at anny levels\""""",CAM,PLUNGE_MILLING,OTHER,,,
P2406,10633310,garbled text,MECHATRONICS,PROCEDURE,RUNTIME_BEHAVR,,,
P2406,10635724,Small Body Crosshatch selection difficult,DRAFTING,DRAWING/VIEW,CROSSHATCH,,,
P2406,10637013,Scene Preference 'Soft Shadows' has no effect since NX1980,SYSENG,VISUALIZATION,SCENEPREFERENCE,,,
P2406,10637548,Selection highlight on points,SYSENG,DISPLAY,TEMP_DISPLAY,,,
P2406,10638034,Variational sweep selection curve not functioning as desired,DESIGN,SKETCHER,CREATE_ON_PATH,,,
P2406,10638924,Error in external library,CAM,AREA_MILL,SPIRAL,,,
P2406,10648243,"Shortcut keys \Alt + F\"" is not opening File Tab with Japanese Microsoft IME pref""",SYSENG,UI_TOOLS,UI_TOOLS,,,
P2406,10649288,NX reports warnings when teaching operation sets.,CAM,FEATURE_BASED,FEATURE_TEACH,,,
P2406,10653781,Extremly high physical memory usage during simulation,CAM,ISV,MACH_CODE_BASED,,,
P2406,10658794,License query with lmutil returns wrong Information,SYSTEM,SYSTEM_TOOLS,FLEXLM,,,
P2406,10658807,Unable to import the tif file,SYSENG,VISUALIZATION,RASTER_IMAGE,,,
P2406,10669766,Generate Toolpath shortcut not working for operations which support auto generat,CAM,PLANAR_MILLING,OTHER,,,
P2406,10670380,Alignment of the sheet thickness changes unexpectedly,DESIGN,FREE_FORM_MODEL,BOUNDED_PLANE,,,
P2406,10679375,"FBM -Wedm Free Shaped Straight incorrect, should be Slot Rectangular",CAM,FEATURE_BASED,FEATURE_RECOGNI,,,
P2406,10681358,Floor/Wall Operation leaves Material,CAM,FLOOR_WALL_MILL,FOLLOW_CUT,,,
P2406,10683061,Variable_axis_guiding_curves: output contact data always active ,CAM,GUIDING_CURVE,VARIABLE_AXIS,,,
P2406,10683516,"Cutting line \cavity mill\"" through workpiece""",CAM,CAVITY_MILLING,OTHER,,,
P2406,10684011,NX Drawing view is Flipping when it's Exported to PDF from NX 2206,SYSENG,VISUALIZATION,RASTER_IMAGE,,,
P2406,10686848,Does not generate toolpaths,CAM,PROFILE_3D,SOLID,,,
P2406,10702253,Sketch offset curve flipping side after mirror ship structure,SHIP_DESIGN,STEEL_FEATURES,PLATE,,,
P2406,10702733,Joints change the position without permission,KDA,NX_DIAGRAMMING,DESIGN,,,
P2406,10702885,NX performance issues when loading large monolithic JT assemblies,GATEWAY,OPEN_JT,UNDETERMINED,,,
P2406,10704208,Wrong Turning Material Removal with Assembly Tool in ToolPath Animation,CAM,TOOLS,TURN_TRACK_PNT,,,
P2406,10705330,Forward Extension in Line path not changing box options,RSD_GENERAL,PATH,LINE,,,
P2406,10706835,NX slows down when using classification library,ROUTING_GENERAL,REUSE_LIBRARY,CLASSIFICATION,,,
P2406,10707202,NX2011Abaqusfem,CAE,ADV_SIMULATION,MATERIALS,,,
P2406,10707951,NX CAM - holemaking operations errors when moving components,CAM,DRILLING,GEOMETRY,,,
P2406,10725391,TDP Publish exports view in tiny scale with custom fit percentage setting,PMI,PLMXML,ALL,,,
P2406,10726792,FeatureCollection.CreateThreadBuilder throws unknown exception with missing XML,DESIGN,FEATURE_MODEL,THREAD,,,
P2406,10726903,Dual sketch dimension will only display when being set to a reference dimension,DESIGN,SKETCHER,DIMENSIONS,,,
P2406,10727708,Tool Number is not synchronized,CAM,USER_INTERFACE,ONT,,,
P2406,10728452,Suppress by Expression won't work consistent on Isolate Object,DESIGN,FEATURE_MODEL,SUPPRESS,,,
P2406,10729440,Multi Axis Roughing - Custom Feed/Speed doesn't work with FeedRate Optimization,CAM,MULTIAXIS_ROUGH,ALL,,,
P2406,10729663,CAM: Toolpath Generation gives Unexpected Approach Motion,CAM,SURFACE_CONTOUR,NON_CUT_MOVES,,,
P2406,10730711,About the behavior of the renew sketch,DESIGN,SKETCHER,UPDATE,,,
P2406,10731913,Constraints are not displayed in all of the multiple window tabs,ASSEMBLIES,POSITIONING,CONSTRAINTS,,,
P2406,10734280,Tool Coordinate System Robot ,CAM,ISV,ROBOTICS,,,
P2406,10737664,Large file sizes,ASSEMBLIES,ASSEMBLY_MODEL,FACET_JT_REPS,,,
P2406,10738351,Error during making mirror feature from mirror feature.,DESIGN,CURVE,EXTRACT_CURVE,,,
P2406,10738534,FBM CONFIGURATOR changes the engage type of the operation,CAM,FEATURE_BASED,FEATURE_TEACH,,,
P2406,10740617,User Abort while Generating AREA_MILL Operation.,CAM,SURFACE_CONTOUR,PERFORM_FASC,,,
P2406,10743810,RDD:Associate in NX not working Verification request if Parameter owned by user2,DESIGN,MA_REQUIREMENTS,ALL,,,
P2406,10744448,Undo Mark is Missing during ToolPath Simulation,CAM,ISV,USER_INTERFACE,,,
P2406,10745078,"\Invalid Profile String\"" error message appears while editing the die design feat""",KDA,DIE_DESIGN,UPPER_DRAW_DIE,,,
P2406,10745557,Bitmap of the text field cannot be updated after GUI is shown,SYSENG,DOCUMENTATION,UISTYLER,,,
P2406,10746823,Importing Creo data into NX leads to incorrect results,TRANSLATOR,PROE_INTERFACE,ALL,,,
P2406,10748129,Land Thickness(LT) is created wrongly by Lower Scrap Cutter.,KDA,DIE_DESIGN,LOWER_SCRAP_CUT,,,
P2406,10748376,Undo Mark is Missing message when Close Machine Simulation,CAM,ISV,USER_INTERFACE,,,
P2406,10749134,The tool paths gouges the part geometry in Z LEVEL Profile operation.,CAM,ZLEVEL_MILL,OTHER,,,
P2406,10750326,"PS36.1.144 Fixed: \Shell\"" cannot be performed on a solid body created by rotating an elliptical sk""",DESIGN,FEATURE_MODEL,SHELL,,,
P2406,10751208,How to stack Notes on Auto Balloon,DRAFTING,TABLES,PL_AUTO_BALLOON,,,
P2406,10752859,Sketch dimension flips upon drawing and deleting unrelated line,DESIGN,SKETCHER,DIMENSIONS,,,
P2406,10753965,Machining Features Group Redistribute command does not work,CAM,FEATURE_BASED,OTHER,,,
P2406,10754550,no templates for NX Motion,NXMANAGER,FILE_NEW,TEMPLATES,,,
P2406,10758310,unable to export a probe tool to the ascii library from managed NX,CAM,TC_MFG,OTHER,,,
P2406,10758963,I can't edit the position of object that created with FTA after placing.,DESIGN,FEAT_TEMPLATE,FRAMEWORK,,,
P2406,10759377,Components will not load when changing reference sets,ASSEMBLIES,ASSEMBLY_MODEL,REFERENCE_SETS,,,
P2406,10760051,Next Sketch - Constraint not possible without moving stationary curve,DESIGN,SKETCHER,VTK_SOLVER,,,
P2406,10761569,S.86) Transient BEM - not running model with full mesh due to acoustic elements,CAE,ADV_SIMULATION,SONATE,,,
P2406,10762541,Routing - Length attribute not updating after first creation,ROUTING_GENERAL,STOCK_AS_COMP,EDIT_STOCK,,,
P2406,10762699,FlexLM 11.19.1 forced checkin of inactive clients,SYSTEM,SYSTEM_TOOLS,FLEXLM,,,
P2406,10765884,Advanced Search Windows visualization issue,SYSENG,UI_TOOLS,DIALOG_LAYOUT,,,
P2406,10773029,workpiece/geometry/Specify Part,CAM,CAVITY_MILLING,OTHER,,,
P2406,10776895,CAM: FACE_MIL_MIDPASS Toolpath Deviation,CAM,FACING_MIDPASS,ALL,,,
P2406,10777083,DTP_NX_Creation of Draw punch at Die Center Axis gives a false result,KDA,DIE_DESIGN,DRAW_DIE_PUNCH,,,
P2406,10778340,Rotation center of model,CAE,ADV_SIMULATION,POST_DISPLAY,,,
P2406,10778624,NX Cannot Compute Component Move with Wave,NX_SHEET_METAL,ALL,ALL,,,
P2406,10780566,PMI symbol is not exported correctly to JT and TDP,PMI,PLMXML,ALL,,,
P2406,10781387,Robot control errors,CAM,ISV,ROBOTICS,,,
P2406,10781710,Deformable part with components loses the transformation matrix after revise,NXMANAGER,ASSEMBLY,PART_FAMILY_UPD,,,
P2406,10782533,Lock Axis UDE SIM18,CAM,POSTCONFIG,ALL,,,
P2406,10782759,Next Sketch - stationary curve gets moveable to create a coincidence constrain,DESIGN,SKETCHER,VTK_SOLVER,,,
P2406,10783619,Export to STEP242 and import back into NX - associated objects are lots or incor,TRANSLATOR,STEP_AP242,STEP_TO_UG,,,
P2406,10785578,Time delay when define sketch plane on the face where Boolean(unite) was applied,DESIGN,SKETCHER,UNDETERMINED,,,
P2406,10785904,copy/paste disappear in CAM operation,CAM,USER_INTERFACE,CAM_SESSION,,,
P2406,10786152,Sketch flips after editing angular dimension value during creation.,DESIGN,SKETCHER,DIMENSIONS,,,
P2406,10786454,Create Feature process error: Missing template: '/FLOOR_WALL' for class…,CAM,FEATURE_BASED,OPERATION_SELEC,,,
P2406,10787891,Open C APIs in uf_sket.h should explain caveats with new sketch solver,DESIGN,SKETCHER,USER_FUNCTION,,,
P2406,10787917,PS36.0.179: Corner Edge Blend Issue,DESIGN,FEATURE_MODEL,BLEND_EDGES,,,
P2406,10788475,Generate Contour Profile gives Unexpected ToolPath,CAM,CONTOUR_PROFILE,OTHER,,,
P2406,10789402,"Regenerating \extraction path\"" causes component collision.""",ASSEMBLIES,SEQUENCING,PATH_PLANNING,,,
P2406,10789621,Step translator GUI with strange and unreadable text,TRANSLATOR,STEP_AP214,USABILITY,,,
P2406,10789884,Clone Assembly carry out attribute empty while save as operation has values,ASSEMBLIES,ASSEMBLY_MODEL,CLONE_ASSEMBLY,,,
P2406,10790280,Update failure message when inserting UDF/Feature Template,DESIGN,FEATURE_MODEL,DIAGNOSTICS,,,
P2406,10790899,Multi Axis Deburring unnecessary toolpath,CAM,MULTIAXIS_DEBUR,ALL,,,
P2406,10791078,Edit dimension in sketcher failure crashes NX,DESIGN,SKETCHER,VTK_SOLVER,,,
P2406,10791750,"\ A dimension subscript for an array attribute was out of range or invalid\""""",ASSEMBLIES,ASSEMBLY_MODEL,FACET_JT_REPS,,,
P2406,10792175,CAM NX2212.8101 - Legacy Adaptive Milling Significant Increase In Cutting Time,CAM,ADAPTIVE_MILL,ALL,,,
P2406,10795806,CAM: Flow Mill small area detection,CAM,FLOW_MILLING,REFTOOL,,,
P2406,10795966,Next Sketch - stationary curve gets moveable to create a perpendicular constra,DESIGN,SKETCHER,VTK_SOLVER,,,
P2406,10795969,(PS36.1.146 Verified) Large Edge Gap in Edge Blend,STUDIO_DESIGN,FREE_FORM,STUDIO_SURFACE,,,
P2406,10798332,Problem Tilt Tool Axis,CAM,TOOL_PATH,TOOL_AXIS_TILT,,,
P2406,10798871,[CAD] Tabular note is not updated when the part file is opned,DRAFTING,TABLES,TABULAR_NOTES,,,
P2406,10798887,Error occurred during Update NX part in spreadsheet,DESIGN,EXPRESSION,ALL,,,
P2406,10798969,Unable to import TIFF image exported with 400 dpi.,SYSENG,VISUALIZATION,RASTER_IMAGE,,,
P2406,10798971,Find gouge motion in Z_level profile operation,CAM,ZLEVEL_MILL,OTHER,,,
V2406,10799381,Thermal Expansion coefficient (CTE) type for Multiphysics environment has no eff,CAE,ADV_SIMULATION,MATERIALS,,,
P2406,10799538,NX Crash when opening links from a Pdf from NX Internal Browser,SYSENG,UI_TOOLS,WEB_BROWSER,,,
P2406,10800819,Formboard Flattening,ROUTING_ELEC,FORMBOARD_V2,FLIP_COMPONENT,,,
P2406,10801050,"UGALTREP, during save as New Item, the Item Name is changing to Item ID even tho",NXMANAGER,FILE_SAVE_AS,NEW_ITEM,,,
P2406,10801551,Next Sketch - stationary curve gets moveable to create a tangent constraint,DESIGN,SKETCHER,VTK_SOLVER,,,
P2406,10801576,PC setzt 5th leader nach Traori nicht zurГјck,CAM,POSTCONFIG,ALL,,,
P2406,10801580,TRAORI wechselt ständig zwischen G94 und G95,CAM,POSTCONFIG,ALL,,,
P2406,10801631,Line command with option point on curve does not work properly in spanish locali,SYSENG,UI_CONSTRUCTORS,POINT,,,
P2406,10802439,Generate Z Level Undercut throws code 67 - Error in external library,CAM,ZLEVEL_MILL,UNDERCUT,,,
P2406,10802718,ADINA Nastran interface | Bolt preload not applied,CAE,ADV_SIMULATION,NASTRN_NX_EXPRT,,,
P2406,10802857,Synchronize Subassembly Properties creates ambiguous typed attributes,ARCHITECTURE,USER_ATTRIBUTES,GENERAL,,,
P2406,10806492,Append CGNS mesh file,CAE,ADV_SIMULATION,NVA_ACO,,,
P2406,10806599,Delay Link Update delays the hole position but not its diameter change,DESIGN,FEATURE_MODEL,HOLE,,,
RICHARDSON, GREG (richardg),10807218,"The attribute \Preferred\""",ROUTING_GENERAL,PATH,ASSIGN_CORNER,8/11/2023 7:25,10/10/2023 5:34,N
P2406,10807673,UGMASTER can't open with missing Wave components,NXMANAGER,FILE_OPEN,ALL,,,
P2406,10808860,"it is not possible to preset \collision check against ipw\""""",CAM,TOOL_PATH,GOUGE_CHECK,,,
P2406,10809383,Wrong feedrate value ba using PostConfigurator output feedrate param,CAM,POSTCONFIG,ALL,,,
P2406,10809434,Different Tool path coordinates output in Cue/Status Line,CAM,TOOL_PATH,ANIMATION,,,
P2406,10810048,About the behavior of Minimally Load.,ASSEMBLIES,PART_FILE_OPS,MINIMAL_LOAD,,,
P2406,10811496,Slowness experienced by many business users while loading assemblies in NX Manag,ASSEMBLIES,ASSEMBLY_MODEL,FIND_COMPONENT,,,
P2406,10811839,Cannot copy/paste or drag and drop manufacturing objects,CAM,USER_INTERFACE,CAM_SESSION,,,
P2406,10813335,PS36.0.196: Sew incorrect on specific surfaces,DESIGN,FEATURE_MODEL,SEW,,,
P2406,10813824,Wave Link component change not carrying changed faces into the cam operation,CAM,BASIC_FUNCTIONS,UNDETERMINED,,,
P2406,10814226,"Error closing and \Force Save All\"" a component in an assembly""",NXMANAGER,FILE_SAVE,STRUCTURE_SYNC,,,
P2406,10814863,rough turn smooth operation sequence makes unneeded tool path,CAM,TURNING,ROUGH,,,
P2406,10815064,Export STEP and Parasolid from NX to TC fails for REF_TYPE=Text,TRANSLATOR,STEP_AP203,ALL,,,
P2406,10815934,Motion Datum Points not highlighted when used by CSYS,CAE,MOTION,MOT_DATUM_CSYS,,,
P2406,10815941,Motion Navigator Points not highlighted when used by CSYS,CAE,MOTION,MOT_DATUM_CSYS,,,
P2406,10816018,nxtransdirect displaying improper message about web tier when not used.,NXMANAGER,STARTUP,ALL,,,
P2406,10818014,Gap between lines in note differs with text hight bellow 1 for last line,DRAFTING,ANNOTATION,TEXT_RENDERING,,,
P2406,10818895,"Unite fails with \The tool and target do not form a complete intersection\""""",DESIGN,FEATURE_MODEL,BOOLEAN,,,
P2406,10819219,Missing Copy when Select Object in the ONT,CAM,USER_INTERFACE,CAM_SESSION,,,
P2406,10819240,No Method to Retrieve a List of ToolPath Event Type by using GetNumberOfFindings,CAM,UFUNC,ALL,,,
P2406,10819305,Generation times are slower after upgrading the NX version,CAM,ZLEVEL_MILL,OTHER,,,
P2406,10819386,Disappearing 1D curve from FEM,CAE,ADV_SIMULATION,POLYGON_DISPLAY,,,
P2406,10819701,Cut area is not in the part geometry message in Z level operation.,CAM,ZLEVEL_MILL,USER_INTERFACE,,,
P2406,10820392,The rotary safety move is not being output from Post Configurator,CAM,POSTCONFIG,ALL,,,
P2406,10824981,PlayDotNetJournal is returning an exception in Debug mode.,SYSENG,NXOPEN,.NET,,,
P2406,10825990,"Simulation in NX-Motion cannot be started, when NX is openened from Teamcenter",NXMANAGER,FILE_NEW,TEMPLATES,,,
P2406,10826267,"nxtopvdirect translation terminal due to GRM error in NX2306,TC14.2 and not in N",NXMANAGER,TRANSLATORS,INFRASTRUCTURE,,,
P2406,10826364,Wrong Circle Coordinates for Helix Interpolation Generated in NX2306 for Fanuc,CAM,POSTBUILDER,POSTPROCESS,,,
P2406,10826808,DCE Not Showing Subordinate Design Feature Welds in Assembly Navigator,ASSEMBLIES,NAVIGATORS,ANT_4GD,,,
P2406,10827253,PS36.0.194 Scaling feature is not unresponsive.,DESIGN,FEATURE_MODEL,SCALING,,,
P2406,10827809,Backface culling issue with Color map of Deviation Gauge,DESIGN,POLYGON_MODEL,TEXTURE_UI,,,
P2406,10828073,Can't use arc center with linear dimension,DRAFTING,DIMENSION,RAPID_DIM,,,
P2406,10830862,[C] mom_level_number merge,CAM,ADD_3DFREFRM_OP,THINWALL,,,
P2406,10833109,Unable to generate 3d profile path with reduced neck,CAM,TOOLS,OTHER,,,
P2406,10833513,Publish TDP is showing PMI Section views incorrectly,TECH_DATA_PKG,PUBLISH,CORE,,,
P2406,10833534,DatumPlaneBuilder function SetPointAndDirection causes warnings when committed,DESIGN,FEATURE_MODEL,DATUM_PLANE,,,
P2406,10834155,Floor Wall Contour Injury,CAM,FLOOR_WALL_MILL,OTHER,,,
P2406,10835296,Unable to add new workarea in Japanese version of NX ALP,MFG_ASM_LINE_PL,LOAD_LINE,ALL,,,
P2406,10835352,"[CAD]\Checkmate\"" does not detect over constrained in new sketch as failed.""",KDA,VALIDATION,CK_MODELING,,,
P2406,10835786,WebNode is not automatically updated when model is changed,MECHATRONICS,WEB_HANDING_SYS,WEB,,,
P2406,10836111,"Files cannot be opened: \Part file is corrupt\"" error""",SYSENG,VISUALIZATION,LIGHTS,,,
P2406,10836137,Internal Error when loading assemblies with Synchronize Assembly Arrangements,NXMANAGER,FILE_OPEN,ARRANGEMEN_SYNC,,,
P2406,10836903,STEP AP242: wrong PMI leader head location,TRANSLATOR,STEP_AP242,UG_TO_STEP,,,
P2406,10836947,"Choose Family Member: Unable to display help information, Application context is",UGDOC,GENERAL,ALL,,,
P2406,10836981,Robotics Wrong Dynamic Tool Axis During CAM Operation Edit,CAM,ISV,ROBOTICS,,,
P2406,10837070,Vision Camera - call takes very long time and no image generation,MECHATRONICS,PROCEDURE,VISION_CAMERA,,,
P2406,10837750,"SE CAM pro gives \Error handling Failed\"" message while generating the operation""",CAM,AREA_MILL,ALL,,,
P2406,10838954,Inapplicable Grid Preference settings in Symbol Designer,KDA,SYMBOL_DESIGNER,USER_INTERFACE,,,
P2406,10838981,Persistent Symbol Ports in Diagramming,KDA,NX_DIAGRAMMING,DESIGN,,,
P2406,10839247,Connection Function Filters Incorrectly,KDA,NX_DIAGRAMMING,DESIGN,,,
P2406,10839289,NXOpen Journal from File>Print now disregards page size and orientation,SYSENG,VISUALIZATION,PRINT/CLIPBOARD,,,
P2406,10839675,Synchronous Assemblies is slow,ASSEMBLIES,SYNC_MODL,MOVE,,,
P2406,10839755,Bolt preload Display issue Ansys environment,CAE,ADV_SIMULATION,BOUNDARY_COND,,,
P2406,10840218,NX2306 Feature Template failure,DESIGN,FEAT_TEMPLATE,UI,,,
P2406,10840642,The specified expression variable does not exist error inserting a tif file,SYSENG,VISUALIZATION,RASTER_IMAGE,,,
P2406,10841358,Internal error CAM setup when machine without kinematics is revised,CAM,MACHINE_TOOL,REPLACE_MACHINE,,,
P2406,10841445,New issue in NX2212.8501 for Turning toolpath and IPW incorrect after milling op,CAM,TURNING,IPW,,,
P2406,10841875,Can not create Stage Model from Existing part.,STAGE_MODEL,TEMPLATE,USER_INTERFACE,,,
P2406,10841916,"Feature Control Frames do not realign when switching from \Flag\"" Leader type""",PMI,FCF,CORE,,,
P2406,10842190,"\Synchronize Views\"" does not work with \""Compare Body\""""",DESIGN,INFO_ANALYSIS,MODEL_COMPARE,,,
P2406,10842517,Measure[Face] annotation is not updated correctly in display window.,DESIGN,INFO_ANALYSIS,MEASURE,,,
P2406,10842555,Part Family table jumps to the left after editing a cell on the last line,ASSEMBLIES,PART_FAMILIES,GENERAL,,,
P2406,10842885,Linked Body using Assign Feature Group Color loses color after edit,ROUTING_GENERAL,PREFERENCES,ROUTING,,,
P2406,10843318,Face normals from Rectangular Grid question,DESIGN,ALGORITHMIC_MDL,FEATURE,,,
P2406,10843569,"Cannot open a part file with \An RM object had an unsuitable OM class for this situation\"" error""",STUDIO_DESIGN,ANALYZE,SURF_CONTINUITY,,,
P2406,10843833,NXMGR: Save As New ItemType is not keeping attribute values after 'Save',NXMANAGER,FILE_SAVE_AS,NEWITEM_DF_TYPE,,,
P2406,10844697,Non-cutting movement of FBM,CAM,FEATURE_BASED,KNOWLEDGE_EDITO,,,
P2406,10845106,Unclarity manuall NX multi-user notifications configuration,ASSEMBLIES,DOCUMENTATION,ALL,,,
P2406,10845163,2D Section Window Disappears as measure option selects.,DESIGN,INFO_ANALYSIS,MEASURE,,,
P2406,10845499,Incorrect Material Grade in attribute for certain OOTB Brackets,SHIP_DESIGN,STEEL_FEATURES,BRACKET,,,
P2406,10845785,Selection Filters tab disappears from the Resource Bar after docking and closing,SYSENG,UI_TOOLS,RESOURCE_BAR,,,
P2406,10846062,Cannot open sketch nor cannot renew sketch,DESIGN,SKETCHER,RENEW,,,
P2406,10847006,NXOpen.UF.UFModl.ModelCompare3() is returning an different results in NX2306,DESIGN,INFO_ANALYSIS,MODEL_COMPARE,,,
P2406,10847104,Copy and paste without constraint in Assemblies.,ASSEMBLIES,NAVIGATORS,ANT_COPY_PASTE,,,
P2406,10847603,Wrong rotated Zeropoint ,CAM,ISV,CONTENT,,,
P2406,10848482,Bad size for allocation request in Storage Manager error at area mill,CAM,SURFACE_CONTOUR,PERFORM_FASC,,,
P2406,10848570,Workset Multi-Configuration: AWVis does not work.,NXMANAGER,SESSN_RECONNECT,ALL,,,
P2406,10849377,Unused load faces are considered in topology optimization,DESIGN,TO4D,CONTROLLER,,,
P2406,10849745,"Linked Body causes the error \A deleted or invalid class ID was used\""""",ARCHITECTURE,OM,LOAD,,,
P2406,10850060,Cannot make all sketch lines equal,DESIGN,SKETCHER,VTK_SOLVER,,,
P2406,10850175,Sketch dimensions can't be moved before editing,DESIGN,SKETCHER,RELATION_BROWSE,,,
P2406,10850278,Transition Path Generation - Fail to Insert Parameter,CAM,BASIC_FUNCTIONS,TRANSITION_PATH,,,
P2406,10850343,"open \cloud connect tool manager\"" crashes""",CAM,TOOLS,OTHER,,,
P2406,10850449,Measure command does not show the density,DESIGN,INFO_ANALYSIS,MEASURE,,,
P2406,10850484,Reused section view does not adjust when scaling the body afterwards,DESIGN,INFO_ANALYSIS,MODEL_COMPARE,,,
P2406,10850699,Import sim stuck. Group name issues ( MATOVR),CAE,ADV_SIMULATION,NASTRN_NX_IMPRT,,,
P2406,10850711,NX: Cannot See Effectivity Intents in NX,NXMANAGER,FILE_NEW,ALL,,,
P2406,10851027,Narrow dimensions are created for the sketch dimensions,DESIGN,SKETCHER,ALT_SOLUTION,,,
P2406,10851605,Nastran Modal stress Strain Issue,CAE,ADV_SIMULATION,POST_RESULT,,,
P2406,10851883,Calling uf5947 it's returning cloned id as 0 for drafting line,DRAFTING,DRAWING/VIEW,VW_OTHER,,,
P2406,10852090,Copy/Paste CAM Operations Expand all the Operations in Operation Navigator,CAM,BASIC_FUNCTIONS,UNDETERMINED,,,
P2406,10852147,AreaMapDebug file created by flow mill ref tool operation in Managed NX,CAM,FLOW_MILLING,REFTOOL,,,
P2406,10852696,About the behavior of selected faces being deselected,SYSENG,DISPLAY,HIGHLIGHTING,,,
P2406,10853064,Werkzeugweg fehlerhaft Radiuskorrektur PostConfigurator,CAM,POSTCONFIG,ALL,,,
P2406,10853074,Different Results for Check Tool Path with Parametric Tool vs Tool Assembly,CAM,TOOL_PATH,GOUGE_CHECK,,,
P2406,10853090,AreaMapDebug file created by flow mill ref tool operation in Managed NX,CAM,FLOW_MILLING,REFTOOL,,,
P2406,10853113,Failed to Generate Contour Surface Area Operation,CAM,SURFACE_CONTOUR,PERFORM_VASC,,,
P2406,10853721,"Comment \Used By …\"" is added to the expression after editing UDF.""",DESIGN,FEATURE_MODEL,UDF_INSERT,,,
P2406,10853981,Feature Template - selection intent not working properly to hide elements,DESIGN,FEAT_TEMPLATE,MODELING,,,
P2406,10854120,Edge preparation for Groove-Welds created with NX-Join is unclear and wrong,JOIN,ALL,ALL,,,
P2406,10855607,"Missing associativity to welds, when using weld dimensioning in NX-Join",JOIN,ALL,ALL,,,
P2406,10856020,NX Integration Naming Rules - Not auto populating on Idealized Part,CAE,ADV_SIMULATION,FILE_OPERATIONS,,,
P2406,10856314,Select Similar Face - Multi selection,ARCHITECTURE,REGION_FINDER,ALGORITHM,,,
P2406,10856373,GlobalShaping:Different Results with same Surface (small/big),DESIGN,FREE_FORM_MODEL,GLOBAL_SHAPING,,,
P2406,10856382,Feature Template - directions shown in wrong place when instancing a FT,DESIGN,FEAT_TEMPLATE,UI,,,
P2406,10856383,Feature Template - Error shown when inserting a Feature Template,DESIGN,FEATURE_MODEL,UDF_INSERT,,,
P2406,10856384,Feature Template - wrong geometry in show after inserting a FT,DESIGN,FEAT_TEMPLATE,MODELING,,,
P2406,10856385,GlobalShaping: Different Directions of CSYS Version 1,DESIGN,FREE_FORM_MODEL,GLOBAL_SHAPING,,,
P2406,10856386,GlobalShaping:Z-Direction of Datum CSYS switch automatically,DESIGN,FREE_FORM_MODEL,GLOBAL_SHAPING,,,
P2406,10856416,GlobalShaping:Direction of Cartesian CSYS is wrong,DESIGN,FREE_FORM_MODEL,GLOBAL_SHAPING,,,
P2406,10856497,Memory access violation if template in .OPT file contain upper case units name,CAM,TC_MFG,TEMPLATES,,,
P2406,10856609,Session hangs when adding reusable part when Allow Multiple Revisions is enabled,ASSEMBLIES,ASSEMBLY_MODEL,MULTI_CONFIGS,,,
P2406,10856695,Issue opening Assembly,ASSEMBLIES,POSITIONING,CONSTRAINTS,,,
P2406,10857445,Feature Template - wrong sturcture shown in Part Navigator,DESIGN,FEAT_TEMPLATE,FRAMEWORK,,,
P2406,10857480,Random Electrode BLANK_HEIGHT evaluation depending on Extension Height input,KDA,ELECTRODE_DESGN,ADD_BLANK,,,
P2406,10857702,Sketch becomes partially constrained after edit angular dimension,DESIGN,SKETCHER,VTK_SOLVER,,,
P2406,10858244,"Toolshank is not deleted in library when you \replace\"" tool""",CAM,LIBRARIES,TOOLS,,,
P2406,10858298,FBM - Height for Thread Milling Initial Engage not Recognized in MKE,CAM,FEATURE_BASED,KNOWLEDGE_EDITO,,,
P2406,10858302,Validate PCA report is not displaying in web browser window,PCB_EXCHANGE,VALIDATE,ALL,,,
P2406,10858420,"graph with path length is incorrect when \polygon edge\"" pick is used""",CAE,ADV_SIMULATION,POST_OTHER,,,
P2406,10858589,PMI associated objects fail to highlight in TcVis when solid is used,TRANSLATOR,NX_JT,PMI,,,
P2406,10859048,PS36.1.105 fix: unite don't works correctly without error message,DESIGN,FEATURE_MODEL,BOOLEAN,,,
P2406,10859409,NX sketch elements can't be selected / deleted from product interface,DESIGN,SKETCHER,COPY/PASTE,,,
P2406,10860257,Falsche Berechnung der Drehzahl ,CAM,LIBRARIES,FEEDS_SPEEDS,,,
P2406,10860330,Change Background - Memory Access Violation,SYSENG,VISUALIZATION,RAYTRACESTUDIO,,,
P2406,10861201,Not able to create curve plate,STRUCTURE_DES,DESIGN,PLATE,,,
P2406,10861210,Move Handles does not allow selected items to be picked,RSD_GENERAL,PART,PLACE_PART,,,
P2406,10861245,About 3D Centerline's Radial dimension.,DRAFTING,ANNOTATION,CENTERLINE,,,
P2406,10861350,Title block not exported in DXF/DWG,TRANSLATOR,DXF_DWG,EXPORT_DRAFTING,,,
P2406,10861943,Open error - Failed to load part when trying to load object on demand,CORRUPTED_PARTS,MODELING,ALL,,,
P2406,10862263,"When inserting About Feature Template, an error message is output.",DESIGN,INFO_ANALYSIS,MEASURE,,,
P2406,10862448,Internal error: memory access violation after edit 'Path Length Annotation',ROUTING_ELEC,FORMBOARD_V2,AUTO_ANNOTATION,,,
P2406,10862479,Basic Design: Create Collar Plate on mirrored stiffener failing,SHIP_DESIGN,BASIC_DESIGN,ASSOC_MIRROR,,,
P2406,10862517,"Profile Cutout Preview \delayed\"" on mirrored profile""",SHIP_DESIGN,BASIC_DESIGN,ASSOC_MIRROR,,,
P2406,10862524,Internal Memory Access Violation during OCX Export,SHIP_DESIGN,BASIC_DESIGN,STRUCTURE_XML,,,
P2406,10862535,PMI Label in Slope Analysis is not adjusting font size for Inch parts as it reads Metric numbers,DESIGN,INFO_ANALYSIS,FACE_SLOPE,,,
P2406,10862559,Wrong Edge Reinforcement if Cutout fails during Copy Basic Design Object,SHIP_DESIGN,BASIC_DESIGN,CPY_OBS_BT_PLN,,,
P2406,10862625,Basic Design: Copy Basic Design Object: Number of Features growind,SHIP_DESIGN,BASIC_DESIGN,CPY_OBS_BT_PLN,,,
P2406,10862683,Reuse Library dialog does not update when changing types in MOLDWIZARD without hitting apply,KDA,MOLDWIZARD,STANDARD_PARTS,,,
P2406,10862774,"When using NX launcher, NX fails to launch if Startup Overrides are selected",NXMANAGER,UTILITIES,REFILE,,,
P2406,10862942,About Visual Overlay results display in Teamcenter NX,DRAFTING,DRAWING/VIEW,DRAWING_COMPARE,,,
P2406,10863131,Crash,CAM,CAVITY_MILLING,OTHER,,,
P2406,10863171,2D-3D cross-probing - highlight not correct when user select on the RSD run tree,RSD_MECHANICAL,RUN_NAVIGATOR,GENERAL,,,
P2406,10863186,Incorrect bounding face of cutout referenced after Copy BD Object,SHIP_DESIGN,BASIC_DESIGN,CPY_OBS_BT_PLN,,,
P2406,10863280,Consolidation doesn't recognize change in geometry when changed to sheet metal,STRUCTURE_DES,DESIGN,CONSOLIDATE,,,
P2406,10863285,Automatic 1D element creation and translucency persistance,CAE,ADV_SIMULATION,UPDATE_AFEM,,,
P2406,10863291,Plate Functionality Creates Parent and Child,STRUCTURE_DES,DESIGN,CONSOLIDATE,,,
P2406,10863356,Transition Basic Design to Detail Design - many objects failing,SHIP_DESIGN,BASIC_DESIGN,TRANSITION,,,
P2406,10864162,This is a reserved attribute title,NXMANAGER,ATTRIBUTES,MAPPING,,,
P2406,10864267,Tables missed in exported dxf/dwg file,TRANSLATOR,DXF_DWG,ALL,,,
P2406,10864446,Postprocess Machinecode with custom UGII_CAM_POST_OUTPUT_DIR,CAM,POSTPROCESS,ALL,,,
P2406,10865222,Extra G28U0 and G28W0 codes (home position return) are output with DMG_NTX_1000_HTBC_Fanuc31i.,CAM,POST_HUB,CONTENT,,,
P2406,10865414,Old Turbo mode delivers wrong coolant Code,CAM,POSTCONFIG,ALL,,,
P2406,10865515,TLDATA is missing in threading operation in NX2212 and NX2306,CAM,TURNING,THREADING,,,
P2406,10865655,Mass Source Precedence is not used for calculations,ASSEMBLIES,WEIGHT_MANAGE,ALL,,,
P2406,10865713,Cavity Mill on IPW gives inconsistent results,CAM,CAVITY_MILLING,FOLLOW_CUT,,,
P2406,10865968,group name for suffix last character is missing,CAE,ADV_SIMULATION,ANSYS_EXPORT,,,
P2406,10865973,Material View wrong tick box in navigator,CAE,ADV_SIMULATION,NAVIGATOR,,,
P2406,10866088,User interface has changed in bad,SYSENG,UI_TOOLS,RIBBON,,,
P2406,10866264,Stitch edges performance issue,CAE,ADV_SIMULATION,MODEL_CLEANUP,,,
P2406,10866416,NX not remembering active navigator when Performance Predictor is on,SYSENG,UI_TOOLS,APP_TASK,,,
P2406,10866496,Deformable Part Feature is converted into Feature Group,DESIGN,FEATURE_MODEL,PATTERN_VARIATN,,,
P2406,10866530,Problems with parallel generate in cam,CAM,FLOOR_WALL_MILL,OTHER,,,
P2406,10866612,Temperature in convective zones defined through a table of fields,CAE,ADV_SIMULATION,FIELDS,,,
P2406,10866636,PS36.01.113 fix: Geometry unrelated to a Subtract disappears,DESIGN,FEATURE_MODEL,BOOLEAN,,,
P2406,10866794,Aisin ESCS D_HEEDS FEP,CAE,MOTION,TB,,,
P2406,10867796,The display name of checkmate profile is not translated to Japanese.,KDA,VALIDATION,RUN_TEST,,,
P2406,10867801,Notes with Chinese fonts cannot be displayed correctly in NX drawing.,SYSENG,DISPLAY,LINE_FONTS,,,
P2406,10868285,NX Crash Startup +++ Unexpected C++ exception,NXMANAGER,TEAMCENTER_NAV,COLUMNS,,,
P2406,10869138,Editing Plate takes too much time,SHIP_DESIGN,STEEL_FEATURES,PLATE,,,
P2406,10869143,"When execute tcin_import utility using mapfile, error occurred.",NXMANAGER,CLONE_IMPORT,IMPORT_ASSEMBLY,,,
P2406,10869376,NX Motion Crash issue,CAE,MOTION,SOLVER_LMS,,,
P2406,10869496,Rigid Groups in Animation Design do not hide/show based on components,ANIMATION_DES,BASIC_MD_OBJ,RIGID_GROUP,,,
P2406,10870074,mom_turn_cycle_cut_depth has incorrect value when only one cut level is used,CAM,TURNING,OTHER,,,
P2406,10870083,Tool Assembly disappears after Collision in CSE,CAM,ISV,MACH_CODE_BASED,,,
P2406,10870140,Posted operation name is not the same as program group,CAM,POSTPROCESS,ALL,,,
P2406,10870169,Posted operatiom has 4 numbers error says not,CAM,POSTPROCESS,ALL,,,
P2406,10870175,Probing - Paste with reference does not work,CAM,BASIC_FUNCTIONS,PASTE_REFERENCE,,,
P2406,10870191,Post a operation with 5 numbers doesn't give an error,CAM,POSTPROCESS,ALL,,,
P2406,10870225,Probing Cylinder - not associative,CAM,PROBING,ON_MACHINE,,,
P2406,10870492,Cavity Mill Operation is Gouge the Part,CAM,CAVITY_MILLING,FOLLOW_CUT,,,
P2406,10870995,Feature Template labels are displayed in Japanese.,DESIGN,FEAT_TEMPLATE,UI,,,
P2406,10870997,Disable Sketch Emphasis is no effect,DESIGN,SKETCHER,DISPLAY,,,
P2406,10871057,NXOpen : Unable to Retrieve Boundary Objects for Floor/Wall Operation,CAM,JOURNALING,ALL,,,
P2406,10871252,Wrong placement of component in JT file,TRANSLATOR,NX_JT,GENERAL,,,
P2406,10871382,Feature Template List expressions are displayed in Japanese.,DESIGN,FEAT_TEMPLATE,UI,,,
P2406,10871578,Exported different digits thermal and structural ,CAE,ADV_SIMULATION,THRM_FLW_EXPORT,,,
P2406,10872123,Thread table changes not getting updated.,DESIGN,FEATURE_MODEL,THREAD,,,
P2406,10872268,Post Configurator - Library Source Tool,CAM,POSTCONFIG,ALL,,,
P2406,10872580,"Export Parasolid dialog box option \Entire Assembly\"" not saved in Dialog Memory""",DESIGN,FILE_OPS,EXPORTPARASOLID,,,
P2406,10872597,Colors changed in visualization settings are not reflected in Compare Bodies command.,DESIGN,INFO_ANALYSIS,MODEL_COMPARE,,,
P2406,10872819,[NXOpen .NET] Method GetTemplateStatus not available,CAM,JOURNALING,ALL,,,
P2406,10872846,Rough turn smooth only generating a single pass when a trim plane is selected.,CAM,TURNING,ROUGH,,,
P2406,10872855,1D Element-Nodal results in Post View,CAE,ADV_SIMULATION,POST_RESULT,,,
P2406,10872896,Facing Head Base Component not able to add Kinematic Chain,CAM,MACHINE_TOOL,MACHTOOL_BUILDR,,,
P2406,10872918,Flat pattern export file name is not correct when Item contains a slash,NX_SHEET_METAL,FLAT_PAT_EXPORT,DXF,,,
P2406,10873218,Altrep of asy getting loaded as non-master to its component,NXMANAGER,CLONE_IMPORT,IMPORT_ASSEMBLY,,,
V2406,10873471,SpecDur - Link in documentation doesn't lead to more information about the topic,CAE,ADV_SIMULATION,DUR_SPEC_UI,,,
P2406,10873480,No Smart LightWeight Data found,DRAFTING,DRAWING/VIEW,BASE_VIEW,,,
P2406,10874258,"Tool name for \OPTIMIZED_NC\"" is output in Japanese when \""mom_tool_type\"" is used.""",CAM,POSTCONFIG,ALL,,,
P2406,10874399,Robot control cannot be applied with GENERIC_MOTION,CAM,ISV,ROBOTICS,,,
P2406,10874658,OCX export - Failed to make trimmed surface,SHIP_DESIGN,BASIC_DESIGN,STRUCTURE_XML,,,
P2406,10874819,No Spindle S word output in code for tapping when spindle speed is 99 rpm,CAM,POSTCONFIG,ALL,,,
P2406,10874843,"Manufacturing crashes to Gateway with \Encountered unexpected NULL pointer\"" error""",CAM,BASIC_FUNCTIONS,UNDETERMINED,,,
P2406,10875214,G83 is output at the side drilling under Main Spindle. ,CAM,POST_HUB,CONTENT,,,
P2406,10875254,About Splines created when editing Studio Surface,STUDIO_DESIGN,FREE_FORM,STUDIO_SURFACE,,,
P2406,10875340,PS37.0.021 fix: Intersecting target and tool faces may have problems that cause intersection gaps,DESIGN,FEATURE_MODEL,BOOLEAN,,,
P2406,10875485,PNT refresh issue for Product Interface icon,DESIGN,PART_NAVIGATOR,GENERAL,,,
P2406,10875711,'Open in window' command and the previous tab,SYSENG,SELECTION,OTHER,,,
P2406,10876086,"Simulation aborts with the error \\""A possible infinite loop has been detected.\""""",CAM,POST_HUB,CONTENT,,,
P2406,10876254,An Internal error occurred when opening the part file and it cannot be opened.,KDA,WELD_ASSISTANT,EASY_SPOT,,,
P2406,10876306,"[Motion]About \Show Visualization\"" of springs""",CAE,MOTION,FORCES,,,
P2406,10876353,Floor Wall operation generates a small backward move,CAM,FLOOR_WALL_MILL,OTHER,,,
P2406,10876622,Glue definition not exported when CONM1 in the Region,CAE,ADV_SIMULATION,NASTRN_NX_EXPRT,,,
P2406,10876658,Error with start chamfer at some threaded holes features in new version of NX,DESIGN,FEATURE_MODEL,HOLE,,,
P2406,10877160,Issue with bolt connection,CAE,ADV_SIMULATION,MESH_1D,,,
P2406,10877325,OCX Export: The boundary does not reference a solid body!,SHIP_DESIGN,BASIC_DESIGN,STRUCTURE_XML,,,
P2406,10877420,On the lightning bolt symbol in assembly constraints,ASSEMBLIES,POSITIONING,USER_INTERFACE,,,
P2406,10877795,NX session freezes performing export Step214 when a sub-component is saved in another session,TRANSLATOR,STEP_AP214,IMPORT_ASSEMBLY,,,
P2406,10877994,Attempt to delete an object in partially loaded file- error opening an assembly,DESIGN,SKETCHER,RELATION_IGNORE,,,
P2406,10878012,"KRX Attribute parsing behaviour to NX is broken in NX2306, was fine in NX2212 and below",SHIP_DESIGN,STEEL_FEATURES,BRACKET,,,
P2406,10878101,"Unable to display \Descriptive name\"" using attribute received from TC in Reuse Library.""",KDA,REUSE_LIBRARY,NAVIGATOR,,,
P2406,10878131,Regarding the operation when sewing multiple sheet bodies - History-Free Mode,DESIGN,FEATURE_MODEL,SEW,,,
P2406,10878560,Probing Cylinder position not associative,CAM,PROBING,ON_MACHINE,,,
P2406,10878573,NXOpen::LoadOptions::ReferenceSetOverride description needs correction,ASSEMBLIES,PART_FILE_OPS,LOAD_OPTIONS_UI,,,
P2406,10878666,Invalid plot with Create Graph command.,CAE,ADV_SIMULATION,POST_OTHER,,,
P2406,10878980,exporting deck is consuming more time,CAE,ADV_SIMULATION,MS_THICKNESS,,,
P2406,10879420,ZM moves when thread turning additional passes in use,CAM,TURNING,THREADING,,,
P2406,10879543,UF_SKET_create_geometric_constraint() cannnot create constraint in NX2206,DESIGN,SKETCHER,JOURNALING,,,
P2406,10879967,"Linear Path Selection Scope Gets Stuck at \Within Work Part Only\""""",ROUTING_GENERAL,PATH,CREATE_PATH,,,
P2406,10880081,NX crashes when inserting a certain feature template.,DESIGN,FEAT_TEMPLATE,UI,,,
P2406,10880182,"Unable to deform because, either deformed parents of component exist or deform bodies are promoted",KDA,REUSE_LIBRARY,ADD_REUSE_COMP,,,
P2406,10880228,After selecting and deselecting MATHEM : Export terminated because of error,CAE,ADV_SIMULATION,MATERIALS,,,
P2406,10880236,Offset value cannot be 0 in Penetration Management,SHIP_DESIGN,TOOLS,PENETRATION_MGT,,,
P2406,10880342,mesh control on edge not correctly propagate during 3d sweep with multi body option,CAE,ADV_SIMULATION,MESH_3D_HEX,,,
P2406,10880450,"Command \make unique\"" takes a very long time in NX CAM.""",CAM,TC_MFG,OTHER,,,
P2406,10880680,Damping of flexible body does not update when expression changes,CAE,MOTION,FLEX_BODY_SC,,,
P2406,10880818,Getting wrong B axis when operation order is from face machining to side machining,CAM,POST_HUB,CONTENT,,,
P2406,10880909,"Subdivision Cage display is currently not emphasized correctly, when in an active Design Group",STUDIO_DESIGN,SUBDIVISION,DRAW_CAGE,,,
P2406,10881032,"NX Diagramming - Run property value of cascaded LOV not applied when clicking \Apply\""""",ARCHITECTURE,USER_ATTRIBUTES,UI,,,
P2406,10881054, Cannot copy/paste or drag and drop manufacturing objects,CAM,USER_INTERFACE,CAM_SESSION,,,
P2406,10881065,Drawing dimensioning issue with fatal error,DRAFTING,DIMENSION,HOLE_CALLOUT,,,
P2406,10881069,"TBEM: Simulation results (e.g. pressure over time) are not reasonable after 1,2 seconds.",CAE,ADV_SIMULATION,SONATE,,,
P2406,10881250,Change of Flat Pattern parameters will not update Flat-Pattern view,NX_SHEET_METAL,FLAT_PATTERN,ALL,,,
P2406,10881255,Advice on how to find bad faces on a body.,DESIGN,INFO_ANALYSIS,EXAM_GEOM,,,
P2406,10881716,Issues with new Midsurfacing Tool,DESIGN,FREE_FORM_MODEL,MID_SURFACE,,,
P2406,10882115,"In Operation Navigator, right-clicking with the mouse does not allow copying.",CAM,USER_INTERFACE,CAM_SESSION,,,
P2406,10882199,Best Fit does not work.,DESIGN,POLYGON_MODEL,BESTFIT_ALIGN,,,
P2406,10882303,Assembly constraint replace selected faces after apply,GATEWAY,OPEN_JT,ASSOCIATIVITY,,,
P2406,10882309,"Publish PCB, Clone Assembly - Keine Auswahl von Komponenten die in der Struktur tiefer liegen als die Leiterplatte",PCB_EXCHANGE,VALIDATE,ALL,,,
P2406,10882386,Mittellinie einer zylindrischen Bemassung in 2D-Komponente nach Zerlegen verändert,DRAFTING,2D_LAYOUT,SMASH_2D_COMP,,,
P2406,10882575,Using %Tool Diameter in Overlap gives a Cusp Higher to the Corner Radius of the Tool,CAM,CAVITY_MILLING,FOLLOW_CUT,,,
P2406,10882601,Inconsistent preview display for edit Custom Feature with rollback depending on feature sequence,DESIGN,ARCHITECTURE,FEATURE_MODEL,,,
P2406,10882854,"Operation status \regenerate\"" after change Max RPM""",CAM,TURNING,USER_INTERFACE,,,
P2406,10883182,PS36.1.191Fixed: Shell Command Issue,DESIGN,FEATURE_MODEL,SHELL,,,
P2406,10883639,Calling NXOpen.UF.UFPart.ApplyFamilyInstance() wrapper method NX is getting freeze.,SYSENG,INTEL_PLATFORM,PREDICT_SEL,,,
P2406,10884038,About the Sketch Constraints Browser display,DESIGN,SKETCHER,RELATION_BROWSE,,,
P2406,10884047,"Automatic Generate not triggered when \Dwell After Rough Cut\"" is modified""",CAM,TURNING,OTHER,,,
P2406,10884056,"SE430, In Operation Navigator,right-clicking with the mouse does not allow copying",CAM,USER_INTERFACE,CAM_SESSION,,,
P2406,10884305,OCX export results in Internal error: memory access violation message,SHIP_DESIGN,BASIC_DESIGN,STRUCTURE_XML,,,
P2406,10884710,Ray traced Studio Preferences Documentation incorrect,UGDOC,GENERAL,ALL,,,
P2406,10888048,Customer Defined Symbol DXF Export,TRANSLATOR,DXF_DWG,ALL,,,
P2406,10888106,Modify the properties of multiple meshes does not work for 1D CBAR/CBEAM elements.,CAE,ADV_SIMULATION,ELEMENT_PROPS,,,
P2406,10888140,NX Theme Type - Dark - missing Icons ( Background wrong) not in NX 1973,SYSENG,UI_TOOLS,THEME,,,
P2406,10888149,[PS36.1.156] Hole feature not removing material.,DESIGN,FEATURE_MODEL,HOLE,,,
P2406,10888193,Turning Tool Tracking Points change while doing Machine Update. ,CAM,TOOLS,TURN_TRACK_PNT,,,
P2406,10888231,"Feature manipulation (create,delete,modify) in NX part takes a long time",PMI,DIMENSION,LINEAR,,,
P2406,10888342,Incomprehensible calculation of sustainability KPI'S for sheet metal parts,KDA,SUSTAINABILITY,ALL,,,
P2406,10888657,Issues with new Midsurfacing Tool Hiding reference midsurface,DESIGN,FREE_FORM_MODEL,MID_SURFACE,,,
P2406,10888667,Issues with new Midsurfacing Tool Show Automatic Pair checkbox,DESIGN,FREE_FORM_MODEL,MID_SURFACE,,,
P2406,10888951,NXOpen.Measurement.GetAngle uses out parameters as input reference unexpectedly,DESIGN,INFO_ANALYSIS,MEASURE,,,
P2406,10889417,Linked Bodies are hidden after welds have been created,JOIN,ALL,ALL,,,
P2406,10889426,MUD tool goes wrong in NX CAM Machining Setup Instructions,CAM,POST_HUB,CONTENT,,,
P2406,10889459,Leading zeros are omitted for Position ID numbers for manufacturing plates.,SHIP_DESIGN,MANUFACTURING,MFG_PREP,,,
P2406,10889559,"\missing extracted silhouette curves in Exact view\""""",DRAFTING,DRAWING/VIEW,PARASOLID,,,
P2406,10889562,DXF/DWG export problem - tabular note,TRANSLATOR,DXF_DWG,ALL,,,
P2406,10889848,DMG DMU65 SMKS kit: tool change call needs to be decomposed,CAM,POST_HUB,CONTENT,,,
P2406,10889948,Bounding Body should maintain custom Face and Feature colors on Edit,KDA,MOLDWIZARD,BOUNDING_BODY,,,
P2406,10889979,displays Acceleration output 2 times per frequency,CAE,ADV_SIMULATION,POST_RESULT,,,
P2406,10890214,"When customer perform an update with deform component, an unnecessary feature is created.",ASSEMBLIES,DEFORM,ALL,,,
P2406,10890574,"Material not applied to structure designer members if material library format is set to \Directory of MatML files\""""",STRUCTURE_DES,APPLICATION,ENVIRONMENT,,,
P2406,10890580,Drawing View Missing Details if viewed from different angle,DRAFTING,DRAWING/VIEW,BASE_VIEW,,,
P2406,10890592,Stiffeners not limited by their boundaries when exporting to OCX,SHIP_DESIGN,BASIC_DESIGN,STRUCTURE_XML,,,
P2406,10890597,No more tools are added to machine setup instructions after MUD ,CAM,POST_HUB,CONTENT,,,
P2406,10891496,Delete the second body is impossible.,DESIGN,FILE_OPS,EXPORTPARASOLID,,,
V2406,10891753,add properties with Add Type Attributes don't work as expected in German localization,MFG_LINE_DESIG,GENERAL,ALL,,,
V2406,10891809,NX23063D,CAE,ADV_SIMULATION,MESH_BDRY_LAYR,,,
P2406,10891828,"\Internal error: memory access violation\"" when open a Workset from AW embedded in NXManager.""",NXMANAGER,FILE_OPEN,PARTITIONS,,,
P2406,10892003,Clamp commands are not output correctly related to PR10865334.,CAM,POST_HUB,CONTENT,,,
P2406,10892005,The unit of the total heat load is displayed incorrectly,CAE,ADV_SIMULATION,POST_RESULT,,,
P2406,10892411,NXOpen call to workPart.Annotations.IdSymbols return an empty collection,PMI,BALLOON_NOTE,UI,,,
P2406,10892638,Simulation behavior is wrong.,CAM,POST_HUB,CONTENT,,,
P2406,10892673,"Select the center axis or arc of a groove using the [Groove] command, an message will be displayed.",DESIGN,FEATURE_MODEL,GROOVE,,,
P2406,10893033,Structure Designer License Issue,STRUCTURE_DES,APPLICATION,ENVIRONMENT,,,
P2406,10893206,Naming of members does not work anymore in NX2212,STRUCTURE_DES,NAVIGATOR,ALL,,,
P2406,10893344,facing heads revolution has incorrect axis,CAM,ISV,MACH_CODE_BASED,,,
P2406,10893397,facing heads error activating tool,CAM,ISV,MACH_CODE_BASED,,,
P2406,10893571,Animation Designer Contact Feature Degrades Model Performance,ANIMATION_DES,BASIC_MD_OBJ,CONTACT_FACE,,,
P2406,10893862,PMI alignment problem within feature template + visible curve from feature template.,PMI,FEAT_TEMPLATE,ALL,,,
P2406,10893895,"In NX2306 when creating an associative measure, fix at current timestamp is no longer on by default",DESIGN,INFO_ANALYSIS,MEASURE,,,
P2406,10894017,Something is wrong with Resize Pattern in NX2306,DESIGN,SYNC_MODEL,RESIZE_PATTERN,,,
P2406,10894361,NX 2306 Unable to Import Parasolid Files from Creo 7.0,ASSEMBLIES,PART_FILE_OPS,OPEN_PARASOLID,,,
P2406,10894393,DMU65 SMKS - Cycle 800 seq,CAM,POST_HUB,CONTENT,,,
P2406,10894404,Incorrectly flags negative value of SCRIT when reading in Nastran Input File,CAE,ADV_SIMULATION,MP_IMPORT_STRUC,,,
P2406,10894651,Coating Stack & Reuse Library & IMM,KDA,COATINGS,IMM_INTEG,,,
P2406,10894752,Electrical Routing connection wizard - changing multiplier causes offset to change,ROUTING_ELEC,CONNECTION_LIST,EDIT_CONN,,,
P2406,10894830,"\Line outside displayable bounds\"" message in Syslogs makes it very large (13Gb)""",GATEWAY,VIEW_ORIGIN,ALL,,,
P2406,10895104,"Face Milling Manual Non cutting moves Transfer within regions, type previous plane ",CAM,FACE_MILL,NON_CUT_MOVES,,,
P2406,10895114,Problem with combination of bondzone and gripper ,MECHATRONICS,PROCEDURE,BOND_ZONE,,,
P2406,10895200,Junctions are moved when inserting inline equipment,KDA,NX_DIAGRAMMING,DESIGN,,,
P2406,10895613,NX Routing drawing BOM not updating correctly,ROUTING_GENERAL,BOM,ROUTING_BOM,,,
P2406,10895699,Internal error: memory access violation error while dry run with tcin_import utility,DESIGN,FEATURE_MODEL,MIRROR_BODY,,,
P2406,10895932,Potential bug in NX2306: element connectivity,CAE,ADV_SIMULATION,ELE_NOD_SELECTN,,,
P2406,10895967,Check Mate with Regex fails on TC mapped multi-line part attribute with CRLF,KDA,VALIDATION,CK_FILESTRUCT,,,
P2406,10895981,NX documentation for Setting up Active Workspace and Teamcenter rich client,NXMANAGER,DOCUMENTATION,ALL,,,
P2406,10896174,Sheet polygon body does not come solid polygon body after all edges stitched.,CAE,ADV_SIMULATION,POLYGON_DISPLAY,,,
P2406,10896186,Sheet polygon body does not come solid polygon body after all edges stitched.,CAE,ADV_SIMULATION,POLYGON_DISPLAY,,,
P2406,10896193,Surface Coat with 3d mesh option does not work as described in the documentation.,CAE,ADV_SIMULATION,MESH_2D,,,
P2406,10896194,1D,CAE,ADV_SIMULATION,MESH_1D,,,
P2406,10896195,RBE3,CAE,ADV_SIMULATION,MESH_1D,,,
P2406,10896202,"When cgap is edited, internal error happens",CAE,ADV_SIMULATION,CONNECTIONS,,,
P2406,10896233,Potential bug in NX2306: element connectivity,CAE,ADV_SIMULATION,ELE_NOD_SELECTN,,,
P2406,10896488,"PS36.1.168 Fix: Difference in result of Intersect command when the \Terget\"" and \""Tool\"" designations are switched.""",DESIGN,FEATURE_MODEL,BOOLEAN,,,
P2406,10896493,PS36.1.168: Difference in result of Intersect command when the First Body and Second Body are switched.,DESIGN,INFO_ANALYSIS,INTERFERENCE,,,
P2406,10896773,JT file produces wrong results in drawing view,DRAFTING,DRAWING/VIEW,SECTION_VW,,,
P2406,10897036,Hermle C20 SMKS kit has incorrect machine zero junction location.,CAM,POST_HUB,CONTENT,,,
,10897074,Random nxtransdirect TASKIDs \Failed to upload JT file,NXMANAGER,TRANSLATORS,INFRASTRUCTURE,N,,
P2406,10897165,mom_tool_tapered_shank_length variable does not remain set,CAM,TOOLS,MILLING,,,
P2406,10897285,NX tool from template changes Description.,CAM,TEMPLATES,DEFAULTS,,,
P2406,10897799,A dimension subscript for an array attribute was out of range or invalid,NXMANAGER,ATTRIBUTES,LOV,,,
P2406,10897845,Working revision limit error for tcin_import utility,NXMANAGER,CLONE_IMPORT,IMPORT_ASSEMBLY,,,
P2406,10897925,Unable to Open data in NX when the Display Rule in BMIDE doesn't allow the Group to create Items,ASSEMBLIES,PART_FILE_OPS,FILE_NEW,,,
P2406,10897999,Using custom Reuse Library from network share now incredibly slows down NX GUI,KDA,REUSE_LIBRARY,LIBRARY_MGT,,,
P2406,10898212,Centermarks are still displayed in cropped view,DRAFTING,DRAWING/VIEW,VW_BOUNDARY,,,
,10898386,"License feature \drafting\"" not released after DXF Export",SYSENG,NXOPEN,LICENSING,N,,
P2406,10898436,When importing JT-files to NX the Datum Coordinate System doesn't show,ASSEMBLIES,PART_FILE_OPS,IMPORT_FEATURE,,,
P2406,10898824,Internal Error occur when study is selected in Optimization.,KDA,OPT_WIZARD,OPT_WIZARD,,,
P2406,10899140,Linked bodies in assembly at wrong position in QGDC7X9999212,CORRUPTED_PARTS,MODELING,ALL,,,
P2406,10899147,Linked bodies in assembly with wrong size in QGDC7X9999212,CORRUPTED_PARTS,MODELING,ALL,,,
P2406,10899177,Inconsistent documentation with actual behaviour,PMI,DOCUMENTATION,ALL,,,
P2406,10899443,Export DXF layers problem,NX_SHEET_METAL,FLAT_PATTERN,ALL,,,
P2406,10899497,Feature Template - linking external faces with FT does not work properly,DESIGN,FEAT_TEMPLATE,MODELING,,,
P2406,10899503,Next Sketch - Project Curve has wrong result,DESIGN,SKETCHER,PROJECT_CURVE,,,
P2406,10899722,Error solving mdef with measured expressions,CAE,MOTION,MDF,,,
P2406,10899728,Exported mdef will not solve with mdf toolkit,CAE,MOTION,MDF,,,
P2406,10900250,[HONDA] cannnot calulate INPOWER for panael transmission loss analysis,CAE,ADV_SIMULATION,NVA_ACO,,,
P2406,10900526,Incorrect object for this operation when creating new Structure Designer member,STRUCTURE_DES,CORNER,ALL,,,
P2406,10901028,Use Simplified Reference Set Load Order Fails with Minimal Loading,ASSEMBLIES,ASSEMBLY_MODEL,REFERENCE_SETS,,,
P2406,10901149,Mass Property Option Use Precedence for Calculation breaks Assembly Load Options,ASSEMBLIES,WEIGHT_MANAGE,ALL,,,
P2406,10901215,"if you import a part with a parameter table, you cannot edit parameter.",DESIGN,EXPRESSION,PARAMETER_TABLE,,,
P2406,10901445,Decimal point information is missed in the exported STEP AP242 file.,TRANSLATOR,STEP_AP242,UG_TO_STEP,,,
P2406,10901584,Display changer does not work when rigid body color mode is activated,MECHATRONICS,SENSOR,DISPLAY_CHANGER,,,
P2406,10901781,Issue 3D ADAPTIVE ROUGHING,CAM,3DADAPTIVEROUGH,ALL,,,
P2406,10902277,MPC asleep fem sim issue,CAE,ADV_SIMULATION,BOUNDARY_COND,,,
P2406,10902743,Depending on Hide_Show Status copied measurement points are created or not,DESIGN,INFO_ANALYSIS,MEASURE,,,
P2406,10903068,Smooth Curve - wrong behavior depending on curve deviation value,DESIGN,CURVE,SMOOTH_CURVES,,,
P2406,10903221,Check Fully Defined Sketch Does Not Result in a Fail for Inconsistently Defined Sketch,KDA,VALIDATION,CK_MODELING,,,
P2406,10904877,Feature Template - width of input box does not fit to size of included text,DESIGN,FEAT_TEMPLATE,UI,,,
P2406,10905035,NX CAM calculates mini-movements that cause errors on the machine for various operation types in fin,CAM,ZLEVEL_MILL,NON_CUT_MOVES,,,
P2406,10905050,Limited selections for angle format after using Breakout view.,DRAFTING,DRAWING/VIEW,VWBRK_CONTENT,,,
P2406,10905325,Edit PMI color fails partially,PMI,DIMENSION,LINEAR,,,
P2406,10905483,Measure - Density result not reporting in Engineering Notation,DESIGN,INFO_ANALYSIS,MEASURE,,,
P2406,10905584,"GMPDL - API Checkmate session, features_modeling fails to check back IN - PR# 10912303",SYSENG,DOCUMENTATION,NXOPEN_PGM_GUID,,,
P2406,10905944,Inconsistency in the NX Help directions for setting custom advisor configuration.,PMI,DOCUMENTATION,ALL,,,
P2406,10906635,Session hangs when adding reusable part,ASSEMBLIES,ASSEMBLY_MODEL,MULTI_CONFIGS,,,
P2406,10907306,NX2306 - Save As different from earlier releases,GATEWAY,SAVE_PART,UNDETERMINED,,,
P2406,10907483,NX exits with error when selecting a circle or arc in a sketch.,DESIGN,SKETCHER,UNDO/REDO,,,
P2406,10907578,Bug - Arrangement used for different check geometry,CAM,ADAPTIVE_MILL,ALL,,,
P2406,10907785,Different font used in the NX menus,SYSENG,UI_TOOLS,RIBBON,,,
P2406,10907967,NXOpen : Not able to Retrieve Start/End Vectors of Cut for Contour Profile Operation,CAM,CONTOUR_PROFILE,OTHER,,,
P2406,10907968,Label conflicts occur but do not show in assembly label manager in any level (solving fails),CAE,ADV_SIMULATION,AFEM,,,
P2406,10908633,Error message displayed when measure a projection distance.,DESIGN,INFO_ANALYSIS,MEASURE,,,
P2406,10908643,End points are increased with Extend at Edge at the corner in Z level.,CAM,ZLEVEL_MILL,OTHER,,,
P2406,10909068,RNI Load Performance degradation with 'refiled' ASM template,MBD,NAVIGATOR,PMI,,,
P2406,10909078,Missing pythonStubs folder to support NXOpen Python Intellisense in NX2312,SYSENG,NXOPEN,PYTHON,,,
P2406,10909097,DXF Export not working,TRANSLATOR,DXF_DWG,EXPORT_DRAFTING,,,
P2406,10909267,B.1) presentation of meshes: inactive structural mesh in BEM,CAE,ADV_SIMULATION,NVA_ACO,,,
P2406,10909373,1D element orientation inconsistent,CAE,ADV_SIMULATION,ELEMENT_PROPS,,,
P2406,10909654,Graphics window becomes blank after iges import,TRANSLATOR,IGES,IMPORT_GEOMETRY,,,
P2406,10910075,Ship Structure: Frame zero position is not set to zero when Ship Coordinate definition is changed,SHIP_DESIGN,CONCEPT,MAIN_DIMENSIONS,,,
P2406,10910137,STEP Import failed when SEW is in use for 2 files,TRANSLATOR,STEP_AP214,IMPORT_GEOMETRY,,,
P2406,10911868,"Facinghead, IPW wrong in tool path verification",CAM,TURNING,IPW,,,
P2406,10912078,NX Application is slow when Windows Defender AV Real Time Protection is ON,CAM,TOOL_PATH,OTHER,,,
P2406,10912229,Multi Axis Deburring - Error in External Library,CAM,MULTIAXIS_DEBUR,ALL,,,
P2406,10912303,CreateWrapGeometryBuilder features_modeling license check out and check in,SYSENG,DOCUMENTATION,NXOPEN_PGM_GUID,,,
P2406,10912312,Exported dwg has wrong linear dimension start point,TRANSLATOR,DXF_DWG,EXPORT_DRAFTING,,,
P2406,10912318,Uncheck Items in Tool Path Check not Registered in Dialog Memory,CAM,TOOL_PATH,OTHER,,,
P2406,10912334,Object Transmitter Object from source partially invisible,MECHATRONICS,MISCELLANEOUS,ADD_COMMENTS,,,
P2406,10912683,"Unable to replace a PFM revision without turning ON \Allow Multiple Revisions\""""",ASSEMBLIES,PART_FAMILIES,GENERAL,,,
P2406,10912748,Thickness direction of a Tab is reversed,NX_SHEET_METAL,TAB,PLANAR,,,
P2406,10912839,CYCLE800 is output for every operation in NX 2312 (PC 23.09.0) even though the plane doesn't change,CAM,POSTCONFIG,ALL,,,
P2406,10912846,PS36.1.145 fix: unite of pipes / tube fails,DESIGN,FEATURE_MODEL,BOOLEAN,,,
P2406,10912908,Missing bold fonts in File sub-menus,SYSENG,UI_TOOLS,RIBBON,,,
P2406,10912912,Synchronous assemblies enhancements,ASSEMBLIES,SYNC_MODL,MOVE,,,
P2406,10913061,Cannot select a CSYS within Post-Processing Cutting Planes,CAE,ADV_SIMULATION,POST_RESULT,,,
P2406,10913412,NXMGR: Unable to load locators with Minimally Load Lightweight Display,ASSEMBLIES,PART_FILE_OPS,MINIMAL_LOAD,,,
P2406,10913413,Simcenter 3D remesh issue with no geometry update,CAE,ADV_SIMULATION,MESH_3D_TET,,,
P2406,10913700,"Setting \Synchronize settings from Teamcenter to NX\"" does not work.""",NXMANAGER,DOCUMENTATION,ALL,,,
P2406,10914089,"In TC environment, response function disappears when saving",CAE,ADV_SIMULATION,RESPONSE_SIM,,,
P2406,10914196,NXOpen::Sketch::DimensionGeometry::AssocType always returns 'None' since NX2306,SYSENG,NXOPEN,.NET,,,
V2406,10914225,error surface wrap if label conflict,CAE,ADV_SIMULATION,SURFACE_WRAP,,,
P2406,10914339,Drawing overlay only briefly displayed when using Visual Overlay,DRAFTING,DRAWING/VIEW,DRAWING_COMPARE,,,
P2406,10914347,Midside node placement results in mesh failure,CAE,ADV_SIMULATION,MESH_3D_TET,,,
P2406,10914409,MOM_abort Message not Working Properly in NX2312 series,CAM,POSTPROCESS,NX_POST,,,
P2406,10914536,Plate Preparation body not visible after running Manufacturing XML Output ,SHIP_DESIGN,MANUFACTURING,MANUXML_OUT,,,
P2406,10914783,high order tet mated to a lower order hex with pyramid transition elements- No pyramids created ,CAE,ADV_SIMULATION,MESH_3D_HEX,,,
P2406,10915133,About renewing threaded hole features,DESIGN,FEATURE_MODEL,HOLE,,,
P2406,10915297,Missing Title Block after export,TRANSLATOR,DXF_DWG,EXPORT_DRAFTING,,,
P2406,10915535,Feed & Speeds BUG,CAM,LIBRARIES,FEEDS_SPEEDS,,,
P2406,10915659,Loading structure into NX fails - Error updating an object of type Product Definition Geometry S,PMI,ASSOC_OBJECT,CORE,,,
P2406,10915885,Check-Mate generates unique name for checker/profile spam in NX Syslog,KDA,VALIDATION,FRAME_WORK,,,
P2406,10916635,Unable to Create Member - Object is not of type expected,STRUCTURE_DES,MEMBER,ALL,,,
V2406,10916656,No Probing Cycles Alert is Displayed,CMM_INSPECTION,OTHER,ALL,,,
P2406,10916748,Holemaking - Radial step changed in NX2312,CAM,HOLE_BOSS_MILL,OTHER,,,
P2406,10916776,SpecDur - Cannot show fatigue damage on nugget,CAE,ADV_SIMULATION,DUR_SPEC_SOLV,,,
P2406,10916921,Snap Point On Face is not working correctly with Clip Section ON,SYSENG,SELECTION,SNAP_POINT,,,
P2406,10916965,"Error on Doc. Simcenter 3D, order of operations, Shell location",CAE,ADV_SIMULATION,POST_DISPLAY,,,
P2406,10917819,"Axis external references that display in TCVis do not display in NX,",GATEWAY,OPEN_JT,WIREFRAME,,,
P2406,10918008,UGPART reference file name is garbled,NXMANAGER,CLONE,CLONE_ASSEM,,,
P2406,10918622,Face mask is not getting set properly through Grip in NX2306,SYSENG,SELECTION,SINGLE_SELECT,,,
P2406,10919457,The arc disappears after the CAD file is exported,TRANSLATOR,UGTO2D,EXPORT_DRAFTING,,,
P2406,10919940,"\Transform Path\"" command uses \""routing_advanced\"" license feature when it executed from jounal""",ROUTING_GENERAL,ADMINISTRATION,NXOPEN,,,
P2406,10920662,Error messages that occur on NX in a Japanese environment are garbled.,DESIGN,SKETCHER,UNDO/REDO,,,
P2406,10920703,"\New Simulation\"" changes color palette settings between Interactive & NXOpen""",CAE,ADV_SIMULATION,FILE_OPERATIONS,,,
P2406,10920761,A Question of [Relative Converge Criteria] when executing [Optimization],KDA,OPT_WIZARD,OPT_WIZARD,,,
P2406,10920790,DOEtoke license remains checked out.,DESIGN,CONVERGENT,ARCHITECTURE,,,
P2406,10921332,Inconsientency unit behavior for import samcef result file.,CAE,ADV_SIMULATION,SAMCEF_IMPORT,,,
P2406,10921380,Documentation incorrect - Save Dialog Memory between Sessions,GATEWAY,DOCUMENTATION,ALL,,,
P2406,10926223,Unable to select blend face using reference blend.,KDA,MOLDWIZARD,ALL,,,
P2406,10926570,Item Revise works fine in Teamcenter but fails in NX,NXMANAGER,FILE_SAVE_AS,REVISE,,,
P2406,10926575,Mill_PLanar - WALL_PROFILING - DoesnВґt generate - Crash/Hung NX,CAM,PLANAR_MILLING,OTHER,,,
P2406,10927201,Legacy Basic Curves Tracking Bar Location not persistent,SYSENG,UI_TOOLS,DIALOG_POSITION,,,
P2406,10928262,Lack of information about stepover and depth per cut data from Quick Roughing and Face Milling ZigZag,CAM,SHOP_DOCS,ALL,,,
P2406,10928681,"Inserting UDF raises \Unable to paste\"" if expression counter exceeds 986""",DESIGN,EXPRESSION,ALL,,,
V2406,10928977,RBE3,CAE,ADV_SIMULATION,CONNECTIONS,,,
P2406,10929414,Polygon body is concave by resolution is high,CAE,ADV_SIMULATION,POLYGON_DISPLAY,,,
P2406,10929445,Invisible tools & operations in the ONT using Automatic Holes Machining,CAM,HOLE_BOSS_MILL,OTHER,,,
P2406,10930302,Drag geometry does not work for constraints as documentation states,ASSEMBLIES,DOCUMENTATION,ALL,,,
P2406,10930354,Internal Error,DESIGN,FREE_FORM_MODEL,MID_SURFACE,,,
P2406,10930860,"Launch Sheet Metal Preferences logs many messages \Cant find property owner for (null)\""""",NX_SHEET_METAL,PREFERENCES,ALL,,,
P2406,10931014,Set Machining Data not Working for 3D Adaptive and Quick Roughing,CAM,LIBRARIES,MECHANISM,,,
P2406,10931163,MW Stock Size UI evaluates unpredicted Blank Size due to odd tolerance and rounding behavior,KDA,MOLDWIZARD,STOCK_SIZE,,,
P2406,10933349,closed corner prevented creation of secondary tab ,NX_SHEET_METAL,TAB,PLANAR,,,
P2406,10933692,NX hangs up while adding reuse components in NX TC Integration,ASSEMBLIES,ASSEMBLY_MODEL,MULTI_CONFIGS,,,
P2406,10934084,NX2312 NXOpen C++ Wizard extension uses C++20 for Debug mode only,SYSENG,NXOPEN,WIZARDS,,,
P2406,10934402,Error in NXOpen Python API for Step Types,CAE,ADV_SIMULATION,NXOPEN,,,
P2406,10934553,Position of exploded Component is incorrect in exported jt file.,TRANSLATOR,NX_JT,GEOMETRY,,,
P2406,10935049,Access CurrentDrawingSheet properties throws Fatal Error randomly,SYSENG,NXOPEN,C++,,,
P2406,10935402,Measure with Fix Timestamp is not automatically updating,DESIGN,INFO_ANALYSIS,MEASURE,,,
P2406,10935503,Open C API uc4577 returns 16 characters instead of documented maximum of 12,SYSENG,UG/OPEN,UFUN,,,
P2406,10936627,License requirement of all the C API's located in uf_sf.h file needs to be documented. ,SYSENG,DOCUMENTATION,UGOPEN_C_REF,,,
P2406,10936634,Resource Bar -> Float wrong translation,SYSENG,UI_TOOLS,RESOURCE_BAR,,,
P2406,10936795,NX hangs up with reuse templates conf. with krx,ASSEMBLIES,ASSEMBLY_MODEL,MULTI_CONFIGS,,,
P2406,10936917,1D Connection RBE2 - Node2Node - Proximity Spider - Resets the drop down after apply,CAE,ADV_SIMULATION,CONNECTIONS,,,
P2406,10936948,Parameter Tables will not be overtaken from Feature / Object Template,DESIGN,EXPRESSION,PARAMETER_TABLE,,,
P2406,10936954,Export Step File with Entire Part option failed,NXMANAGER,TRANSLATORS,INFRASTRUCTURE,,,
P2406,10937014,Model display settings - Material Legend - Laminates,CAE,ADV_SIMULATION,MODEL_DISPLAY,,,
P2406,10937192,Face Blend Tangent Asymmetric - wrong position of offset vectors,DESIGN,FEATURE_MODEL,FACE_FACE_BLEND,,,
P2406,10937203,Part Family Table - Highlighting of changes,ASSEMBLIES,PART_FAMILIES,GENERAL,,,
P2406,10937890,JT file contains unwanted lines,PMI,SECTION_VIEW,OTHER,,,
P2406,10938650,Creating a tabbed layout in machine simulation doesn't work properly ,SYSENG,UI_TOOLS,RESOURCE_BAR,,,
P2406,10938654,Samcef vibro-acoustique : Result File is in wrong format,CAE,ADV_SIMULATION,POST_RES_SAMCEF,,,
P2406,10938707,Routing Bill of Material Table update,ROUTING_GENERAL,BOM,ROUTING_BOM,,,
P2406,10938961,"Unable to find setting \Create new flat pattern callouts from defaults\""""",NX_SHEET_METAL,FLAT_PATTERN,ALL,,,
P2406,10939976,NX2312: Under File Utilities different font to NX2206,SYSENG,UI_TOOLS,RIBBON,,,
P2406,10940035,Add component dialog - the loaded parts list shows too many empty lines,ASSEMBLIES,ASSEMBLY_MODEL,COMP_ADD,,,
P2406,10940111,Internal CSE error occurs when calculating variables in NX 2312,CAM,ISV,MACH_CODE_BASED,,,
P2406,10940205,Problem with customer template importing assembly in STEP214,ASSEMBLIES,PART_FILE_OPS,PART_MERGE,,,
P2406,10940315,Feature extrude within the UDF fails when inserting the UDF in a design,DESIGN,FEATURE_MODEL,UDF_UPDATE,,,
P2406,10942586,Calling NXOpen.Features.OffsetFacetBodyBuilder.FacetBody() is returning an exception.,DESIGN,POLYGON_MODEL,LOCAL_OFFSET,,,
P2406,10942786,Cloud Connect Tool Manager doesn't recognize new Tool Materials,CAM,LIBRARIES,CLOUD_MANAGER,,,
P2406,10942802,PathLevelMarker data are wrong for 3D_ADAPTIVE_ROUGHING and Quick Roughing Operation,CAM,JOURNALING,ALL,,,
P2406,10942869,Path.GetUde fails when Cutcom is enabled,CAM,JOURNALING,ALL,,,
P2406,10943104,"NX Resource Bar with location type \Float\"" will not store last position""",SYSENG,UI_TOOLS,RESOURCE_BAR,,,
P2406,10944020,Post Processing using NX Open creates the output files in the incorrect location if a JT has been created,CAM,TC_MFG,OTHER,,,
V2406,10944284,Enforced Displacement Constraint dialog box : DOFs meaning,CAE,ADV_SIMULATION,BOUNDARY_COND,,,
P2406,10944361,No Display Help about Tilt Tool Axis,CAM,DOCUMENTATION,ALL,,,
P2406,10945473,"When measuring (projection distance), after selecting two in Object, the face normal of the plane cannot be selected in Vector.",DESIGN,INFO_ANALYSIS,MEASURE,,,
P2406,10946436,LIB_GE_CONF_set_property_access has no effect on chain tabs,CAM,POSTCONFIG,ALL,,,
P2406,10947574,"Descriptions for \Loading\"" option in Grid Target are wrongly assigned""",KDA,AVDA,GRID_TARGET,,,
P2406,10947729,Cannot start NX from 2TierClient,NXMANAGER,DOCUMENTATION,ALL,,,
P2406,10948095,Sketch pattern failed.,DESIGN,SKETCHER,PATTERN,,,
,10948110,"Importing Asy with clone file using the switch \include_c=no\""",NXMANAGER,CLONE_IMPORT,IMPORT_ASSEMBLY,N,,
P2406,10948168,Skizze Angular dimension with expression created with the Rapid Dimension dialog.,DESIGN,SKETCHER,DIMENSIONS,,,
P2406,10948642,Sketch Curves Flip 180 When Adding an Angular Dimension with Expression ON,DESIGN,SKETCHER,DIMENSIONS,,,
P2406,10948681,Hiding of mesh does not work at the first click on a new SC3D session,CAE,ADV_SIMULATION,NAVIGATOR,,,
P2406,10948794,Bushing elements display,CAE,ADV_SIMULATION,CONNECTIONS,,,
P2406,10949755,About measuring STL data,DESIGN,INFO_ANALYSIS,MEASURE,,,
P2406,10949931,EVA results change after first calculation,CAE,MOTION,SOLVER_LMS,,,
P2406,10950362,Wrong ID for .FEM file when creating it using RMB from part in managed mode,CAE,ADV_SIMULATION,FILE_OPERATIONS,,,
P2406,10950473,Node/Element command - Dropdown Node/Element does not stick an apply,CAE,ADV_SIMULATION,NODE_OPERATIONS,,,
P2406,10950571,Integrate Physical Material Library is ON while Customer Defaults is OFF,NX_SHEET_METAL,PREFERENCES,MATERIAL_TABLE,,,
P2406,10950621,Incorrect XY Plot for the parameters in Condition sequence manager,CAE,ADV_SIMULATION,CONDITION_SEQ,,,
P2406,10950711,FAILED : ug_convert_part.exe,DESIGN,UFUNC,EXPRESSIONS,,,
P2406,10952826,"\can not output code to find <JABL>: <UGS::Tooling::ToolingBoxBuilder>\""""",CAM,WORKPIECE,BLANK,,,
P2406,10953281,Customized Channel Item not Available for GENERIC MOTION,CAM,GENERIC_MOTION,USER_INTERFACE,,,
P2406,10953527,Geometry that has been used as a terminating object for leader is highlighted in JT and 3DPDF,TECH_DATA_PKG,PUBLISH,CORE,,,
P2406,10953550,Error : There is an object which depends on itself (600008),DRAFTING,DRAWING/VIEW,SECTION_VW,,,
P2406,10953553,BOSS_ROUND_STRAIGHT no more detected in NX 2312,CAM,FEATURE_BASED,FEATURE_RECOGNI,,,
P2406,10953956,NX 2306 Load options - Crash,CAE,ADV_SIMULATION,FILE_OPERATIONS,,,
P2406,10954670,Set Machining Data not working for Quick Roughing operation,CAM,LIBRARIES,MECHANISM,,,
P2406,10954884,"Translator export, STEP, DWF/DWG etc. fails in NX session started from AWC",NXMANAGER,TRANSLATORS,INFRASTRUCTURE,,,
P2406,10955198,Circular interpolation (CR output) wrong in planes YZ and XZ,CAM,POSTCONFIG,ALL,,,
P2406,10955205,CSE PLANE SPATIAL Unspecified error when executing method 'calculateIKSAngles',CAM,ISV,MACH_CODE_BASED,,,
P2406,10955407,License issue with LFEM solution run in batch mode,CAE,ADV_SIMULATION,LF_EM,,,
P2406,10956007,Variable axis teach mode point selection is not associative,CAM,TURNING,TEACHMODE,,,
P2406,10957102,Hole Milling TNC CYCLE208 Error argument not in valid range,CAM,POSTCONFIG,ALL,,,
P2406,10957125,Hole Milling TNC CYCLE208 missing operation-defined radial stepover distance,CAM,POSTCONFIG,ALL,,,
P2406,10957390,Electrode Fixture register holder_reg.xlsx with more than 5 entries disables Reference option always,KDA,ELECTRODE_DESGN,OTHERS,,,
P2406,10958579,Suppressed assembly in NX2306 whose child parts are also suppressed by inheritance from the parent assembly.,ASSEMBLIES,WEIGHT_MANAGE,ALL,,,
P2406,10958957,Assembly cannot be opened in NX OOTB and 3D PDF cannot be generated for the same,ASSEMBLIES,POSITIONING,CONSTRAINTS,,,
P2406,10959044,"In NX 2312, when I switch to the measure command while taking a section, I cannot take measurements",DESIGN,INFO_ANALYSIS,MEASURE,,,
P2406,10959232,An error occurs when executing the Measue command and NX 2306 is forced to terminate.,DESIGN,INFO_ANALYSIS,MEASURE,,,
P2406,10959332,"After adding Part from Reuse Library to assembly, Library Part gets modified in NX2312",KDA,REUSE_LIBRARY,ADD_REUSE_COMP,,,
P2406,10959396,display bug: non existent material,CAE,ADV_SIMULATION,MODEL_DISPLAY,,,
P2406,10959616,"Pattern with expressions in the sketcher, must always be replaced by base value",DESIGN,SKETCHER,PATTERN,,,
P2406,10959755,Next Sketch - After replacing template geometry renewed sketch is fulfilled on,DESIGN,SKETCHER,UPDATE,,,
P2406,10959801,Error: The Flute Length of the tool is less than the Depth per Cut.,CAM,FLOOR_WALL_MILL,OTHER,,,
P2406,10959831,1D connection RBE3 Weight Method option in the Leg Node Degrees of Freedom Mesh Associated Data,CAE,ADV_SIMULATION,CONNECTIONS,,,
P2406,10960305,NXOpen CPP Compiler Error in Visual Studio 2019 with Release configuration,SYSENG,NXOPEN,WIZARDS,,,
P2406,10960612,NX generates incorrect warning unable to determine valid rot positions,CAM,POSTCONFIG,ALL,,,
P2406,10960791,Bridge Curve fails to edit in upgrade from NX11 to NX2212,DESIGN,CURVE,BRIDGE,,,
P2406,10960986,PCB exchange Publish PCB removes IDX suffix,PCB_EXCHANGE,IDX_EXPORT,ALL,,,
P2406,10961878,Programs lose Complete status after Checking ToolPath to Other Program,CAM,BASIC_FUNCTIONS,UNDETERMINED,,,
P2406,10961928,Attribute set as required in mapping file but not required in Teamcenter cannot be included as a part family column,NXMANAGER,FILE_NEW,ALL,,,
P2406,10962319,inserisci le faccie in zlevel_profiles,CAM,ZLEVEL_MILL,OTHER,,,
P2406,10964638,Wall Finish Barrel - Ignored Check Stock when Check Geometry are used,CAM,WALL_SWARF,ALL,,,
P2406,10965654,Adding notes is very slow in drafting on large drawings,DRAFTING,DRAWING/VIEW,SECTION_VW,,,
P2406,10966415,NX STEP export failure open NX designs from Teamcenter,NXMANAGER,TRANSLATORS,INFRASTRUCTURE,,,
P2406,10966751,"import STP242 error Failed to load bookmark: One of the invalid characters @!*?\:<>|\` was entered.""",TRANSLATOR,STEP_AP242,STEP_TO_UG,,,
P2406,10967222,mom_spindle_direction does not update during centerline tapping operation,CAM,TURNING,USER_INTERFACE,,,
P2406,10967981,The contact pattern of Gear force can not be generated in specific situation.,CAE,MOTION,GRAPHING,,,
P2406,10968296,NX versions 2206 and later crash in udopcopy when Mirror is used,CAM,BASIC_FUNCTIONS,MIRROR,,,
P2406,10968319,Incorrect CSYS Rotation output from Fanuc Robotics post processor,CAM,POSTPROCESS,ROBOTS,,,
P2406,10968751,Reverse Direction in Centerline Drilling does not update automatically ,CAM,TOOL_PATH,ANIMATION,,,
P2406,10969030,"Create Groove using centerline as tool edge fails with \Cannot finish Operation\""""",DESIGN,FEATURE_MODEL,GROOVE,,,
P2406,10969060,Bulk Edit of attributes results in long delay when Parts List is present,DRAFTING,TABLES,PLIST_UPDATE,,,
P2406,10969185,Group containing only Groups produces failures when updating on load,DESIGN,FEATURE_MODEL,FEATURE_SET,,,
P2406,10969271,Bad french translation in Expressions Editor,DESIGN,EXPRESSION,ALL,,,
P2406,10969345,performance issue fem=>sim,CAE,ADV_SIMULATION,FILE_OPERATIONS,,,
V2406,10969383,OMP - CYCLE998 outputs incorrect point values if MCS is rotated,CMM_INSPECTION,OTHER,ALL,,,
P2406,10969789,Distance sensor - Category change does not cause part change - Incorrect save behavior,MECHATRONICS,SENSOR,DISTANCE_SENSOR,,,
P2406,10971249,"Deviation Gauge: Deviation Label shows \undefined\"" value""",STUDIO_DESIGN,ANALYZE,DEVIATION,,,
P2406,10971518,"Simcenter Nastran deck entry 'PARAM, Gx, y, z' incorrect if 'SET ID' > 5 digits",CAE,ADV_SIMULATION,NASTRN_NX_EXPRT,,,
V2406,10971648,OMP - Inherited automatic clearance plane not used,CMM_INSPECTION,OTHER,ALL,,,
V2406,10971934,OMP - Set-up clearance value added to measure coordinate,CMM_INSPECTION,OTHER,ALL,,,
P2406,10974172,FP2306:,FLEXIBLE_PIPE,GENERAL,ALL,,,
P2406,10974395,Replace component with MCD physics produce unexpected error message in managed mode,MECHATRONICS,MISCELLANEOUS,REPLACE_ASSTNT,,,
P2406,10974400,solr search preview Image is not visible even for PRT Files in NX,KDA,REUSE_LIBRARY,INDEX_SEARCH,,,
P2406,10974565,Importing a drawing .prt into another .prt does not retain images from imported .prt,DRAFTING,ANNOTATION,RASTER_IMAGE,,,
P2406,10975267,Modified flag is displayed when a component is deform,ASSEMBLIES,DEFORM,ALL,,,
P2406,10975316,Error appears three times while inserting Reusable Feature.,DESIGN,FEAT_TEMPLATE,MODELING,,,
P2406,10975361,Set Cut Feed Rate in Custom Data of Cut Area but it didn't work.,CAM,GUIDING_CURVE,FIXED_AXIS,,,
P2406,10975515,Solid body measure expressions (Principal Axes vector) have incorrect formula value.,DESIGN,EXPRESSION,MEASUREMENTS,,,
P2406,10975661,not able to make chamfer in hole feature,DESIGN,FEATURE_MODEL,HOLE,,,
P2406,10975859,Changed settings of 'Export IGES File' dialog are not stored in dialog memory.,TRANSLATOR,IGES,GENERAL,,,
P2406,10976246,"The Dialog \Save As Non-master Parts\"" takes too long to open""",NXMANAGER,FILE_SAVE_AS,NEW_ITEM_TYPE,,,
P2406,10976283,Mirror Planar Deburring operation with Track Deburr Edges doesn't always work ,CAM,PLANAR_DEBUR,ALL,,,
P2406,10976476,Difference between collision bodies from NX2007 and NX2312,MECHATRONICS,BASIC_PHYSICS,COLLISION_BODY,,,
P2406,10976482,Result Probe Error with Deactivation Sets,CAE,ADV_SIMULATION,POST_PROBE,,,
P2406,10976625,Mesh Point and selection recipes,CAE,ADV_SIMULATION,MESH_PLANE_PTS,,,
P2406,10978750,"While creating Fille Surface if patch into part is selected, the resulatant curve differs",STUDIO_DESIGN,FREE_FORM,FILL_HOLE,,,
P2406,10978753,NX2312 Basic Curve - Tracking Bar Position Reset,SYSENG,UI_TOOLS,DIALOG_POSITION,,,
P2406,10978968,Simcenter,CAE,MOTION,FUNCTION,,,
P2406,10979069,Mirror operation on a Planar Deburring with maintain cut direction is not keeping circular engage,CAM,PLANAR_DEBUR,ALL,,,
P2406,10979261,Mirror operation for 3-axis deburring doesn't maintain cut direction,CAM,BASIC_FUNCTIONS,MIRROR,,,
V2406,10979340,OMP - Heidenhain Cycle 426 - False output,CMM_INSPECTION,OTHER,ALL,,,
V2406,10979412,On machine probing - Heidenhain Cycle 426 - Monitoring tool,CMM_INSPECTION,OTHER,ALL,,,
P2406,10980179,"Wrong Japanese translation for \Space Delimited\"" in PMI Table dialog""",PMI,TABLES,UI,,,
P2406,10980313,Associated Objects do not transform with Bend,FLEX_PC_DESIGN,BEND,ALL,,,
P2406,10980374,[CAD]Shape measurement deviation after JT output,TRANSLATOR,NX_JT,GENERAL,,,
P2406,10980381,Thread Callout e.g. G3/4 wrong displayed in Drawing vs Part Navi,DRAFTING,DIMENSION,HOLE_CALLOUT,,,
P2406,10980657,User defined names of CAM object with PostConfigurator,CAM,POSTCONFIG,ALL,,,
P2406,10980663,Checker Logs are not Visible or Viewed in the Quality Dash Board for ATS,ARCHITECTURE,ATS,CHECKERS,,,
P2406,10981886,About checking area,KDA,MOLDED_PART_VAL,ALL,,,
P2406,10981983,Too long checkmate time for point union in TCNX.,JOIN,ALL,ALL,,,
P2406,10982025,undesired Sketch references while selecting Face for placement,DESIGN,SKETCHER,REATTACH_SKETCH,,,
P2406,10982199,CAD NX2212.8901 - Radius Analysis Rendering,SYSENG,GRAPHICS,FACE_ANALYSIS,,,
P2406,10982263,Incorrect behavior of procedure MOM_pattern_set_csys_end in NX 2312,CAM,POSTCONFIG,ALL,,,
P2406,10982432,Operation dialog is opened behind the Resource Bar on the second monitor,SYSENG,UI_TOOLS,RESOURCE_BAR,,,
P2406,10982437,Scaling loads with the subcase manager,CAE,ADV_SIMULATION,NASTRN_NX_EXPRT,,,
P2406,10983100,"When displaying solid body measurements as annotations, the principal axes values are incorrect.",DESIGN,INFO_ANALYSIS,MEASURE,,,
P2406,10983288,"\Secondary roughness (f)\"" entered in SFS is not displayed in MBD Query Report.""",PMI,SURFACE_FINISH,CORE,,,
P2406,10983493,Connection between 3D and 2D lost after saving to TC,NXMANAGER,FILE_SAVE,NX_NONMASTER,,,
P2406,10983539,"When the tolerance in FCF is defined as fraction , MBD Query reports it as Zero",MBD,QUERY,RULE_BASED,,,
P2406,10983650,export_ugdwgimages.exe & TC_NX_CGM_create_pattern,NXMANAGER,PREFERENCES,ALL,,,
P2406,10983699,Tool/Part collision not detected in Machine Code Based Simulation,CAM,ISV,MACH_CODE_BASED,,,
P2406,10984195,Drawing sheet from sheet template not follow revision rule using Increment Sheet Revision command,DRAFTING,DRAWING/VIEW,SHEET_EDIT,,,
P2406,10984212,Cannot get Vector input objects from Angle Measure programmatically by NXOpen,DESIGN,INFO_ANALYSIS,MEASURE,,,
P2406,10984562,"\Clean Motion Objects\"" in \""Part Cleanup\"" dialog information is not carried over""",CAE,MOTION,COUPLERS,,,
P2406,10985079,"\Unclean Polygon bodies\"" after meshing and reopening FEM in v2406-108""",CAE,ADV_SIMULATION,MODEL_CLEANUP,,,
P2406,10985114,No loaded part with name error in syslog,CAM,BASIC_FUNCTIONS,UNDETERMINED,,,
V2406,10985360,On-Machine Probing Inch part cannot use Metric tool,CAM,PROBING,ON_MACHINE,,,
P2406,10985414,Law Curve (by equation) gives bad results for unitless function,DESIGN,EXPRESSION,ALL,,,
P2406,10985698,Mid surfacing,DESIGN,FREE_FORM_MODEL,MID_SURFACE,,,
P2406,10986000,Problems while opening CAM operations with the new customized tabbed layout,SYSENG,UI_TOOLS,RESOURCE_BAR,,,
P2406,10987917,We have LOV with condition that are not shown at time You create a Dataset from the integration NX,NXMANAGER,ATTRIBUTES,LOV,,,
P2406,10988250,Creating a new post from kinematics model results into wrong kinematics settings,CAM,POSTCONFIG,ALL,,,
P2406,10988293,Create Custom Symbol from Smart Lightweight View - Given matrix is not from the required part,DRAFTING,DRAWING/VIEW,LDV_OTHER,,,
P2406,10988403,Severe Error: 580058 at load the reusable Component,KDA,REUSE_LIBRARY,INSERT_REUSE_OB,,,
P2406,10988518,MBD Query - Coordinates of Centerline,MBD,QUERY,CONSUMPTION,,,
P2406,10988528,DTP_NX_Select Box functionality issue in graphical window,UGDOC,GENERAL,ALL,,,
P2406,10988636,PMI Note Background gets turned off when an instance view gets leader,PMI,NOTES,TEXT_EDITOR,,,
P2406,10989835,MBD Query - Tolerance value of FCF,MBD,QUERY,CONSUMPTION,,,
P2406,10990115,ROTATE UDE on a 5 axis dual-head configuration leads to incorrect output on following operation. ,CAM,POSTCONFIG,ALL,,,
P2406,10990452,"Round trip Parasolid issues \The Parasolid file is corrupt\"".""",DESIGN,FILE_OPS,IMPORTPARASOLID,,,
P2406,10990563,Sketch is partially defined,DESIGN,SKETCHER,VTK_SOLVER,,,
P2406,10991046,Automatic Support Creation performance,ADD_FIXED_PLANE,SUPPORTS,OTHER,,,
P2406,10991187,NXMGR: Command finder not auto-populating,SYSENG,UI_TOOLS,COMMAND_FINDER,,,
P2406,10991214,Tolerances are displayed as dates in the exported spreadsheet of MBD Query Report.,MBD,QUERY,RESULTS,,,
P2406,10991253,"After selecting the axis from the measurement vector pulldown, the face cannot be selected.",DESIGN,INFO_ANALYSIS,MEASURE,,,
P2406,10992005,Duplicate geometry when using multiple reference sets in Immersive Explorer and NX VR,SYSENG,VIRTUAL_REALITY,GRAPHIC_DISPLAY,,,
P2406,10992139,error opening file An attempt was made to associated an object with a second other object,CAM,ISV,USER_INTERFACE,,,
P2406,10992693,4 axis tool path - rotate C axis ,CAM,POST_HUB,CONTENT,,,
P2406,10993700,Spreadsheet update of extracted expressions in NX Part fails for locked attributes in same sheet,DESIGN,EXPRESSION,ALL,,,
P2406,10994654,T-Doc : Must be updated the description of Tool Length in Machining Data Libraries ,CAM,DOCUMENTATION,ALL,,,
P2406,10994883,On Machine Probing - Tool Length Correction,CMM_INSPECTION,OTHER,ALL,,,
P2406,10995202,export_ugdwgimages.exe unable to use TC_NX_CGM_create_pattern=${SheetName},NXMANAGER,PREFERENCES,ALL,,,
P2406,10995275,Part Gouged with Cavity Milling,CAM,CAVITY_MILLING,FOLLOW_CUT,,,
P2406,10995373,M91-Command deactivates not the very first transformation in the transformation list,CAM,ISV,MACH_CODE_BASED,,,
P2406,10997543,Negative tolerances are added in the exported spreadsheet of MBD Query Report,MBD,QUERY,CONSUMPTION,,,
P2406,10997600,"\Display in View\"" dialog of a semantic PMI messes up PMI displays""",MBD,NAVIGATOR,MODEL_VIEWS,,,
P2406,10997658,Gripper Stop Gripping on Collision - Gripped Material jumping,MECHATRONICS,PROCEDURE,GRIPPER,,,
P2406,10997892,Position of object is changed with 'Flatten Assembly' option while importing iges file,TRANSLATOR,IGES,IMPORT_GEOMETRY,,,
P2406,10998440,Incorrect preview display,NXMANAGER,TC_PORTAL,SEND_TO_NX,,,
P2406,10998637,Graph command gives wrong abscise if Polygon edge option is used,CAE,DES_SIMULATION,POST_POSTVIEW,,,
P2406,10999204,Error when attempting to sum Element Nodal Grid point forces from SOL108 solution,CAE,ADV_SIMULATION,POST_RESULT,,,
P2406,10999596,WireEDM Start Hole fails to create sketch on XZ Sketch Plane for X aligned Edge,KDA,PROGRESSIVE_DIE,WIRE_EDM_START,,,
P2406,10999781,Assembly disappears from Assembly Navigator importing a PCB when importing a brd,PCB_EXCHANGE,IDF_IMPORT,ALL,,,
P2406,11000408,NXOpen classes ExpressionGroup / ExpressionGroupCollection need correction for visibility control,DESIGN,EXPRESSION,UG/OPEN,,,
P2406,11000681,Mesh Properties - Tolerances are inches even in mm parts,ADD_FIXED_PLANE,GENERAL,ALL,,,
P2406,11000697,Duplicate bodies in parasolid export,DESIGN,FILE_OPS,EXPORTPARASOLID,,,
P2406,11000740,Mesh Properties - Edge resolution tolerance is ineffective,ADD_FIXED_PLANE,GENERAL,ALL,,,
P2406,11000783,Mesh Properties - no width in predefine tolerances,ADD_FIXED_PLANE,GENERAL,ALL,,,
P2406,11001845,"\Automatic Sewing of Surfaces\"" option in 'Import IGES File' dialog causing the deletion of existing objects while importing iges file""",TRANSLATOR,IGES,IMPORT_GEOMETRY,,,
P2406,11002239,SheetMetalPreferencesBuilder.GetFlatPatternAllCalloutTypeDisplay throws Severe error 906 ,NX_SHEET_METAL,PREFERENCES,ALL,,,
P2406,11002385,Fixed Axis Guiding Curves - Minimize Tilt causes gouge,CAM,TOOL_PATH,TOOL_AXIS_TILT,,,
P2406,11002831,"IGES-Translator, values from igesexport.def are not copied",TRANSLATOR,IGES,GENERAL,,,
P2406,11005063,MW Standard Part Position doesn't move with associative Point feature,KDA,MOLDWIZARD,STANDARD_PARTS,,,
P2406,11005775,Integrate Physical Material Library is ON while Customer Defaults is OFF,NX_SHEET_METAL,PREFERENCES,MATERIAL_TABLE,,,
P2406,11005875,Recorded journal code of NXOpen.CAE.Post.TemplateSetAsDefault() does not set loaded template as the default,CAE,ADV_SIMULATION,NXOPEN,,,
P2406,11005964,Wrong Licensefeature inside nx_mfg_token for 3D Adaptive Roughing,CAM,3DADAPTIVEROUGH,ALL,,,
P2406,11006165,SCD5 converter - UNV file converted to SCD5 only contains a fraction of results when read by UDV compared to VKI,CAE,ADV_SIMULATION,UNIF_DATA_VIE,,,
P2406,11008250,Machining Data Management is not working with feeds/speeds separately function,CAM,TOOLS,OTHER,,,
P2406,11008555,NX2312 out of the box operation of Export to CGM/PDF cause the Drafting Sheet data to be corrupted/unavailable for use,SYSENG,NXOPEN,C++,,,
P2406,11009181,Internal Error in CavityMill for Collision Check with Tapered Shank,CAM,CAVITY_MILLING,FOLLOW_CUT,,,
P2406,11013664,Point to Point operation with different tool axis generates wrong output,CAM,POSTPROCESS,ALL,,,
P2406,11013961,Create Simulation Interface not possible with Simcenter 2306,CAE,ADV_SIMULATION,COLLAB_SIM,,,
P2406,11015963,Inspect Tool show wrong mapping when subrprom handling on program group,CAM,POSTCONFIG,ALL,,,
P2406,11016013,SpreadsheetData.GetDefinedAttributesExpressions still returns empty tuple/arrays/vectors,KDA,REUSE_LIBRARY,INDEX_SEARCH,,,
P2406,11016977,Feature Template - Hide of elements of a FT is not possible without setting,DESIGN,FEAT_TEMPLATE,MODELING,,,
P2406,11017304,MW BOM Export to Spreadsheet has massive performance regression with custom template,KDA,MOLDWIZARD,ALL,,,
P2406,11017481,Incorrect Heidenhain Post Configurator Turbo feedrates in Adaptive Milling,CAM,POSTCONFIG,ALL,,,
P2406,11018141,Issue with Conservation of Angular Momentum when Varying Body Inertia,CAE,MOTION,CONTROLS,,,
P2406,11018460,2d mapped mesh,CAE,ADV_SIMULATION,MESH_2D,,,
P2406,11019171,Handle does not getting appear by launching Specify Orientation Block through Block UI Styler application.,SYSENG,UI_CONSTRUCTORS,CSYS,,,
P2406,11019238,NX2312 Space Alignment issue in the Information window,KDA,KNOW_FUSION,LANGUAGE,,,
P2406,11019344,Some settings are reset when exporting IGES.,TRANSLATOR,IGES,GENERAL,,,
P2406,11019577,Part family update doesn't replace all components,ASSEMBLIES,PART_FAMILIES,GENERAL,,,
P2406,11019671,Element Connectivity in .afem for Modifying Leg Nodes of RBE* Elements,CAE,ADV_SIMULATION,ELEM_OPERATIONS,,,
P2406,11019744,InterPropertyLogic (IPL) doesn't work as expected for 'COMMANDBLOCK',CAM,POSTCONFIG,ALL,,,
P2406,11019766,GetArcAndCurveProperties throws an exceptions on valid input,DESIGN,EXPRESSION,MEASUREMENTS,,,
P2406,11019814,"Problem with square root in \single formula\"" by using the \""Tools\"" - \""Function operations\"" - \""Multiple formulas\"" command""",CAE,ADV_SIMULATION,POST_OTHER,,,
P2406,11019847,Translucency Setting in Snapshot,CAE,ADV_SIMULATION,POST_TEMPLATES,,,
P2406,11020428,Unsuppressing Feature Group and PMI controlled by expression causes PMI to be retained,PMI,SUPPRESS,ALL,,,
P2406,11021070,[Note] There is an error in Japanese notation in the command,PMI,NOTES,CORE,,,
P2406,11021154,"Wrong Japanese translation for \Visual Reporting\"" in Customer Defaults""",GATEWAY,CUSTOMER_DEFS,ALL,,,
P2406,11021449,Thread representation incorrect after union,DESIGN,FEATURE_MODEL,THREAD,,,
P2406,11022450,NXOpen.Validate.Logger.LogNXObject() doesn't seem to provide me a way to create referencePoints or referenceVectors in the HD3D Check-Mate tool.,DESIGN,INFO_ANALYSIS,VDA_CHECKER,,,
P2406,11022691,"Problem with square root in \single formula\"".""",CAE,ADV_SIMULATION,POST_OTHER,,,
P2406,11022953,[Edit Curve] command flashes and becomes inoperable.,SYSENG,UI_TOOLS,UI_CUSTOMIZE,,,
P2406,11023200,Cannot open UGMASTER.,CORRUPTED_PARTS,MODELING,ALL,,,
P2406,11023640,MCD rendered unusable by JT export,MECHATRONICS,MISCELLANEOUS,REPLAY,,,
P2406,11023739,Edit MCD Signal Adapter by NXOpen C++ throws Access violation - no RTTI data!,MECHATRONICS,SIGNAL,SIGNAL_ADAPTER,,,
P2406,11023745,Countersink Gouged the Modeled Countersunk Hole,CAM,DOCUMENTATION,ALL,,,
P2406,11023928,Fixed Axis Guided Curve will not generate tool path with ball mills smaller than .3mm,CAM,GUIDING_CURVE,FIXED_AXIS,,,
P2406,11024165,"\DXF\"" Custom Symbol is not exported in the colors as-displayed.""",TRANSLATOR,UGTO2D,ALL,,,
P2406,11024368,Some content of the part list is missing due to Load Options.,DRAFTING,TABLES,PARTS_LIST,,,
P2406,11024432,Measurement Hole or Slot UI: Slot width is not fetched from CAD under Sizes,JOIN,WELD_ASSISTANT,ALL,,,
P2406,11024457,"dxf file is not imported/opened if \IMPORT_TO_WORK_PART =YES\"" exists in settings file""",TRANSLATOR,DXF_DWG,IMPORT_DRAFTING,,,
P2406,11024533,Incorrect behavior of MCD Speed-Control controlled via MCD Signal Adapter,MECHATRONICS,SIGNAL,SIGNAL_ADAPTER,,,
P2406,11024561,"\2D Exchange\"" Custom Symbol is not exported in the colors as-displayed.""",TRANSLATOR,UGTO2D,ALL,,,
P2406,11024609,"Error in runtime behavior \Gripper\""""",MECHATRONICS,PROCEDURE,GRIPPER,,,
P2406,11024709,Arrow Line Stub Length is not respecting Resize on Create and Relative to Saved View resize options,DRAFTING,ANNOTATION,LEADER_TOOL,,,
P2406,11024759,Wrong/inconsistent EAF mentioned in the What's New guide for 'Resolve Constraints for Paste' dialog,SYSTEM,DOCUMENTATION,ALL,,,
P2406,11024962,EM Load generation,CAE,MOTION,FORCES,,,
P2406,11025214,The dialog box for density measurement does not show a value ,DESIGN,INFO_ANALYSIS,MEASURE,,,
P2406,11025826,Big Strategies Image,CAM,GUIDING_CURVE,ALL,,,
P2406,11026117,"Failed to open assembly, Internal Error: Memory Access Violation",NXMANAGER,FILE_OPEN,ALL,,,
P2406,11026176,ADINA input file export does not output BOLTLD in bulk data,CAE,ADV_SIMULATION,NASTRN_NX_EXPRT,,,
P2406,11026721,Missing header PDM_AttributeSearchFilterTerm.hxx as referenced in PDM_SearchRecipeFilterBuilder.hxx,NXMANAGER,UGOPEN,JOURNAMATION,,,
P2406,11026920,User defined views not showing up in MBD Navigator after import,MBD,NAVIGATOR,MODEL_VIEWS,,,
P2406,11027519,Missing Sync Event in Turbo Mode when Sync Mark is set in Operation,CAM,POSTCONFIG,ALL,,,
P2406,11027550,Random retained status for PMIs that are suppressed by expression together with Pattern Feature,PMI,SUPPRESS,ALL,,,
P2406,11027671,MBD Navigator strips out the user define names of PMIs that were created in NX 1919,PMI,DOCUMENTATION,ALL,,,
P2406,11027845,"\Corrupt data found when loading an OM file\"" error occurs when open part file.""",DESIGN,FEATURE_MODEL,MIRROR_FEATURE,,,
P2406,11028386,Check mate validation Result Summary in TC14.3 and NX2306 does not have correct Up-to-date status,KDA,VALIDATION,TC_INTEG,,,
P2406,11028430,Value of mom_part_name has changed in Managed Mode,CAM,POSTPROCESS,ALL,,,
P2406,11028531,Browse command on PNT feature crashes NX,DESIGN,FEATURE_BROWSER,GENERAL,,,
P2406,11028719,Questions about slope analysis,DESIGN,INFO_ANALYSIS,FACE_SLOPE,,,
P2406,11028732,About the type list in the Variational Flange dialog,UGDOC,GENERAL,ALL,,,
P2406,11028801,How to set TC attribute values to initial values when executing clone assembly,ASSEMBLIES,ASSEMBLY_MODEL,CLONE_ASSEMBLY,,,
P2406,11029078,TIMEOUTALL does not work as expected,SYSTEM,SYSTEM_TOOLS,FLEXLM,,,
P2406,11029216,Internal Error when loading component in NX2312,DESIGN,FEATURE_MODEL,EXTRACT_BODY,,,
P2406,11029266,Drawing Compare - Track Drawing Changes incorrectly reports Tabular Note with attribute as changed,DRAFTING,DRAWING/VIEW,DRAWING_COMPARE,,,
P2406,11029269,Different simulation behavior of the MCD Object Display Changer when using Exact or Lightweight.,MECHATRONICS,SENSOR,DISPLAY_CHANGER,,,
P2406,11029433,"Pencil Cursor Icon while using Line/Arc in Sketch, makes it hard to see points",DESIGN,SKETCHER,TASKENVIRONMENT,,,
P2406,11029533,Load drawing fails in NX2306 due to This was caused while updating an object of type Sketch,DESIGN,SKETCHER,UNDO/REDO,,,
P2406,11029563,Deep performance hit when attempting to PMI on WAVE-Linked threads,PMI,DIMENSION,HOLE_CALLOUT,,,
P2406,11029601,Thickness direction matters on Flex Transition in Bridge Transition tool,FLEX_PC_DESIGN,BRIDGE_TRANS,FLEX_TRANSITION,,,
P2406,11029621,NXOpen C++ PDM_AttributeSearchFilterTerm.hxx does not exist,NXMANAGER,UGOPEN,JOURNAMATION,,,
P2406,11029661,Replace Edge: The type filter is blank.,SYSENG,SELECTION,SINGLE_SELECT,,,
P2406,11030084,Show and Hide action throws NULL Pointer error with detail view and custom drafting standard,GATEWAY,BLANK_UI,SHOW_AND_HIDE,,,
P2406,11030163,"when max tolerance to a dimension, the PMI report shows +0.1 -0.1 and not Max.",MBD,QUERY,CONSUMPTION,,,
P2406,11030360,PhysX Solver MCD simulation freezes,MECHATRONICS,SOLVE_TYPE,ARTICULATION,,,
P2406,11030425,added dimension tolerance to hole - internal memory access memory error,PMI,DIMENSION,RAPID_DIM,,,
P2406,11030508,Sketch - Offset Curve freezes NX,DESIGN,SKETCHER,VTK_INTEGRATION,,,
P2406,11030541,Importing an external part,SYSENG,SELECTION,SNAP_POINT,,,
P2406,11030567,NX Freezes on occasion after creating some offset curves and then exit,DESIGN,SKETCHER,VTK_INTEGRATION,,,
P2406,11030638,Internal Error: Memory access Violation when placing PMI within a section view.,SYSENG,SELECTION,SNAP_POINT,,,
P2406,11030658,Converting from found to persistent creates overconstaints.,DESIGN,SKETCHER,NAVIGATOR,,,
P2406,11030686,Reset Color in Selection Filter doesn't appear to work,SYSENG,SELECTION,TYPE_FILTERING,,,
P2406,11030698,NX Crash - Through Curves,STUDIO_DESIGN,FREE_FORM,STUDIO_SURFACE,,,
P2406,11030931,Problem with cut_level-layer in PostConfigurator,CAM,POSTCONFIG,ALL,,,
P2406,11030960,Bill of Process PDF export not working,PART_MFG,WORK_INST,APPLICATION,,,
P2406,11031091,"Add Feature Template throws 674703 \Error while creating body\"" and fails to apply Visual Rule on dialog close""",DESIGN,FEAT_TEMPLATE,MODELING,,,
P2406,11031156,Housing command draft input error & offset from base error,MOLDED_PART_DES,FEATURES,UI,,,
P2406,11031159,Got Internal Memory access violation,SYSENG,UI_TOOLS,TREE_LIST,,,
P2406,11031182,Check Post Protection sold_to_id after encrytion,CAM,POSTCONFIG,ALL,,,
P2406,11031261,Get object type node fails after finishing Algorithmic Modelling TE.,DESIGN,ALGORITHMIC_MDL,FEATURE,,,
P2406,11031642,SketcherNavigator _ not able to hide relation only after unhide it,DESIGN,SKETCHER,NAVIGATOR,,,
P2406,11031662,WAVE interpart navigator fatal error,SYSENG,UI_COMPONENTS,NAVIGATOR_DIAGR,,,
P2406,11031828,Part Protection - severe failure,ARCHITECTURE,RIGHTS_MANAGMNT,ALL,,,
P2406,11031837,Unable to import multiple part family sheets defined in excel,ASSEMBLIES,PART_FAMILIES,GENERAL,,,
P2406,11032089,"\Loads As Saved\"" does not work in \""Clone Assembly\""""",NXMANAGER,CLONE,CLONE_ASSEM,,,
P2406,11032264,Advanced Post Report in Laminate,CAE,ADV_SIMULATION,LAMINATES,,,
P2406,11032350,Missing same Tool Type to Machine Uncut Cut Regions with a different Tool,CAM,DOCUMENTATION,ALL,,,
P2406,11032462,Part changes using Sync Move are not updated in all windows,ASSEMBLIES,SYNC_MODL,MOVE,,,
P2406,11032586,TBEM-results differ extrem when using MLPP based on Forces or Forces and Moments,CAE,ADV_SIMULATION,NVA_NVH_SOLV,,,
P2406,11032613,Legacy part files cause problems in Mechatronics Concept Designer,MECHATRONICS,MISCELLANEOUS,REPLAY,,,
P2406,11032694,Excel formulas disappeared in part family,GATEWAY,SPREADSHEET,ALL,,,
P2406,11032792,Expanded: False does not work in Feature Template,DESIGN,FEAT_TEMPLATE,UI,,,
P2406,11032941,"When normal vector flips sign, Flexible Transition type Bridge Transitions break",FLEX_PC_DESIGN,BRIDGE_TRANS,FLEX_TRANSITION,,,
P2406,11033145,Wrong Text in Customer Default regarding to translucency of Datum Planes,SYSENG,VISUALIZATION,PREFERENCES,,,
P2406,11033173,Web cutter does not support cutting zig-zag node,MECHATRONICS,WEB_HANDING_SYS,WEB_CUTTER,,,
V2406,11033745,CHEBY function decomposed in .minp file instead of computing it natively,CAE,MOTION,FUNCTION,,,
P2406,11033900,NX Feature Template Part - Text Entry not working after updating to NX2306 and NX2312,DESIGN,FEAT_TEMPLATE,MODELING,,,
P2406,11033956,Thread decal stickers - editing strange,DESIGN,FEATURE_MODEL,THREAD,,,
P2406,11033959,PhysX Solver MCD simulation - mesh collison Warning - Simulation stopped,MECHATRONICS,BASIC_PHYSICS,COLLISION_BODY,,,
P2406,11033962,PhysX Solver MCD simulation with transmitter object across parts nio,MECHATRONICS,SENSOR,COLLISION_SENSR,,,
P2406,11033964,PhysX Solver MCD simulation with transmitter object across parts nio,MECHATRONICS,SENSOR,COLLISION_SENSR,,,
P2406,11033968,PhysX Solver MCD simulation with transmitter object across parts nio,MECHATRONICS,MISCELLANEOUS,MCD_MDP,,,
P2406,11034433,Work view is not visible in Part Navigator when Performance Predictor application is active.,DESIGN,PERF_PREDICTOR,POST_PROCESS,,,
P2406,11034471,PS36.1.173 Fixed:Extrude feature with Draft fails.,DESIGN,FEATURE_MODEL,EXTRUDE_GENERAL,,,
P2406,11034813,Animation is displaying Motion components dislocation while relative displacement is very small,CAE,MOTION,SOLVER_LMS_SDK,,,
P2406,11034846,MBD Logic Create Default Hole Tolerance not inheriting Background of PMI & Color,MBD,LOGIC_EDITOR,LOGIC_EDITOR,,,
P2406,11034952,Sketcher fails and NX locks when cursor is dragged over a parabola not in the sketch,DESIGN,SKETCHER,UNDETERMINED,,,
P2406,11034980,Create an Assembly Arrangement documentation,ASSEMBLIES,DOCUMENTATION,ALL,,,
P2406,11034987,Lattice- Connect dangling rods help missing,DESIGN,ADDITIVE,LATTICE,,,
P2406,11035056,The result of checking using the Check Category /Entity Type Mapping is incorrect,KDA,GC_TOOLKIT,CHECKERS,,,
P2406,11035245,Revolve produce unexpected result in drawing View,DRAFTING,DRAWING/VIEW,EXTRACTED_EDGES,,,
P2406,11035499,MCD Preference dialog -Solver Session Settings no entry,MECHATRONICS,PHYSICS_NAV,NAVIGATOR,,,
P2406,11035565,section view add PMI resize and internal memory error,SYSENG,SELECTION,SNAP_POINT,,,
P2406,11035884,A deleted or invalid class id was used on switching to drafting,SYSENG,UI_COMPONENTS,NAVIGATOR_DIAGR,,,
P2406,11036103,Expression in SheetMetal Preferences for customers SheetMetal Bend Formula is not ok,DESIGN,EXPRESSION,ALL,,,
P2406,11036361,Node ID is not recalled on opening annotation dialog again,CAE,ADV_SIMULATION,POST_OTHER,,,
P2406,11036689,Fields can be displayed with Parameter variable for the independent domain and Type: none,CAE,ADV_SIMULATION,FIELDS,,,
P2406,11036814,Stop button doesn't stop the process and hangs in implicit modeling,DESIGN,IMPLICIT_MODEL,MATH,,,
P2406,11037035,New Sketcher Solver produces unexpected results when Moving Sketch Plane,DESIGN,SKETCHER,VTK_SOLVER,,,
P2406,11037461,Inconsistent behavior and insufficient documentation of 'Allow Multi-select of Obstructed Faces' option,UGDOC,GENERAL,ALL,,,
P2406,11037509,Flow rate on HVAC equipment in the NXD decimal places,KDA,NX_DIAGRAMMING,DESIGN,,,
P2406,11037601,memory access violation during Assembly constraint edit,ASSEMBLIES,POSITIONING,CONSTRAINTS,,,
P2406,11037673,Geometry discrepancies of eyellipse with standard 2002 between NX1973 and NX23,KDA,GENERAL_PACKAGE,VEHICLE_PACKAGE,,,
P2406,11037684,Geometry discrepancies of head contur with standard 2002 and 2010 between NX19,KDA,GENERAL_PACKAGE,VEHICLE_PACKAGE,,,
P2406,11037743,Formboard Bundle Rotation incorrect,ROUTING_ELEC,FORMBOARD_V2,ORIENT_BRANCH,,,
P2406,11037824,Groove can not position by selecting the Centerline. ,DESIGN,FEATURE_MODEL,GROOVE,,,
P2406,11038087,Select Similar Faces documentation is not clear.,UGDOC,GENERAL,ALL,,,
P2406,11038285,LOV Value and Description not sync correctly in NX,NXMANAGER,ATTRIBUTES,LOV,,,
P2406,11038625,WALL MILL with Ball mill - toolpath generation fail,CAM,2D_WALL_MILL,ALL,,,
P2406,11038631,universal bushing connection: nodal displacement csys not taken into account for set of points,CAE,ADV_SIMULATION,CONNECTIONS_UNI,,,
P2406,11038710,2D Wall Milling with holder collision,CAM,2D_WALL_MILL,ALL,,,
P2406,11038838,NXOpen Python Intellisense in NX2312 has some issues with new python stub files,SYSENG,NXOPEN,PYTHON,,,
P2406,11038909,Interpart Expression issue with Standard parts when added using Open in Window,KDA,MOLDWIZARD,STANDARD_PARTS,,,
P2406,11039276,Bullut vs. PhysX Solver different behavior collision bodies via signal adapter,MECHATRONICS,PROCEDURE,GRIPPER,,,
P2406,11039336,"new sketch dialog box, orient",DESIGN,SKETCHER,CREATE_SKETCH,,,
P2406,11039342,Sketcher Curve,DESIGN,SKETCHER,CIRCLE/ARC,,,
P2406,11039392,About the behavior of Associated Object in TDP,TECH_DATA_PKG,PUBLISH,CORE,,,
P2406,11040012,Not able to change Title of Collapsible Group in Feature Template Studio,DESIGN,FEAT_TEMPLATE,UI,,,
P2406,11040098,The component suppression has been removed when sketch is edited.,ASSEMBLIES,ASSEMBLY_MODEL,COMP_PATTERN,,,
P2406,11040110," \Project onto Plane\"" option in \""PMI Region\"" dialog does not work""",PMI,ANNOT_PLANE,CORE,,,
P2406,11040547,3DPDF - An object was specified which is not of a valid type for reference set membership,TECH_DATA_PKG,PUBLISH,CORE,,,
P2406,11040645,NC-Code Speed is wrong from NX2312 (works inside NX1953),MECHATRONICS,MISCELLANEOUS,SIMULATION_TOOL,,,
P2406,11040666,Connected Face Finder(CFF) tool unable to select face,JOIN,WELD_ASSISTANT,ALL,,,
P2406,11040691,PhysX Engine CollisionSensorNoDetection,MECHATRONICS,SENSOR,COLLISION_SENSR,,,
P2406,11040751,Relief Depth and Relief Width are read-only in NX2312,NX_SHEET_METAL,PREFERENCES,ALL,,,
P2406,11040794,Access FeatureCollection in NX2312.5001 fails on missing entry point in libpartmodl.dll,SYSENG,UG/OPEN,UFUN,,,
P2406,11040808,NX2312.5001: Unable to find an entry point named 'XJA_FeatureCollection_enumerate' in DLL 'libpartmodl',SYSENG,UG/OPEN,UFUN,,,
P2406,11040819,Incorrect object for this operation,DESIGN,CURVE,TEXT,,,
P2406,11040824,multiBladeBaseGeometry.GetFaces() : Additive Operation Foundation Face thrown an Internal error,CAM,ADD_PLANAR_OP,SPIRAL,,,
P2406,11041171,Internal Error - Memory access violation,SYSENG,SELECTION,SNAP_POINT,,,
P2406,11041365,General Relinker is linking a feature that doesn't match the feature name in the target part,ASSEMBLIES,WAVE,GENERAL_RELINK,,,
P2406,11041397,Unable to find an entry point named 'XJA_FeatureCollection_enumerate' in DLL 'libpartmodl',SYSENG,UG/OPEN,UFUN,,,
P2406,11041586,Copy Paste Component doesn't highlight / select resulting occurrence anymore,ASSEMBLIES,NAVIGATORS,ANT_COPY_PASTE,,,
V2406,11041780,Shell Location - Average and bending is not correctly documented for derived results,CAE,ADV_SIMULATION,POST_DISPLAY,,,
P2406,11041946,NX is getting crashed while opening an assembly,ASSEMBLIES,POSITIONING,CONSTRAINTS,,,
P2406,11043012,Incorrect behavior with PhysX Solver,MECHATRONICS,WEB_HANDING_SYS,WEB,,,
P2406,11044313,IMPORT IGES: Strange behaviour using IGES command,TRANSLATOR,IGES,IMPORT_GEOMETRY,,,
P2406,11044323,Internal Error when Transforming an Edited ToolPath,CAM,BASIC_FUNCTIONS,TRANSFORM,,,
P2406,11045202,match mesh control command issues in 2306,CAE,ADV_SIMULATION,MESH_CONTROL,,,
P2406,11045513,"Motion Math Function ElementT[X,Y,Z] function returns incorrect values",CAE,MOTION,FUNCTION,,,
P2406,11045528,Crash when animating a model with large Flex Body,CAE,MOTION,FLEX_BODY_SC,,,
P2406,11045939,"[CAD]Changed settings in the \Export IGES File\"" dialog are not saved.""",TRANSLATOR,IGES,GENERAL,,,
P2406,11045973,PMI Section curves of object that is not included in the Reference Set is exported in the JT data.,PMI,SECTION_VIEW,OTHER,,,
P2406,11046054,"Translation of \Traversal\"" into german is wrong . Should be \""Querung\"" instead of \""Eilgang\"" """,CAM,PLANAR_MILLING,OTHER,,,
P2406,11046075,object depends on itself error is gone after removing sectioned part,DRAFTING,DRAWING/VIEW,SECTION_LINE,,,
P2406,11046114,Bad size for allocation request in storage manager,CAE,ADV_SIMULATION,BOUNDARY_COND,,,
P2406,11046125,Collaborative Simulation Manager,CAE,ADV_SIMULATION,COLLAB_SIM,,,
P2406,11046260,Quick Roughing and Adaptive milling operations: machining data is not set automatically,CAM,LIBRARIES,MECHANISM,,,
P2406,11046308,logical node support assembly subcomponents for rule checker?,KDA,VALIDATION,UNKNOWN,,,
P2406,11047025,Validation Results Summary has incorrect Up-to-Date Status ,KDA,VALIDATION,TC_INTEG,,,
P2406,11047919,mirror body - only one of three bodies selected are mirrored in Part Fam.,ASSEMBLIES,PART_FAMILIES,GENERAL,,,
P2406,11048449,Editing RBE3 UM data with 6 components throws an error in Pre/Post,CAE,ADV_SIMULATION,ELEMENT_PROPS,,,
P2406,11048582,Error messages with used Instance Operator MCD objects,MECHATRONICS,PROCEDURE,INSTANCE_OP,,,
P2406,11049095,Calling NXOpen.INXObject.Prototype() NXOpen method it's returning an exception as Use askUserMessage ( ) or askSyslogMessage,SYSENG,NXOPEN,C++,,,
P2406,11049451,Operation navigator jumps to the top when measuring distance from part to model,CAM,USER_INTERFACE,ONT,,,
P2406,11051168,Wrong component position when importing IGES with Flatten Assembly option.,TRANSLATOR,IGES,IMPORT_GEOMETRY,,,
P2406,11051715,Object Source Condition Parameter incorrect,MECHATRONICS,BASIC_PHYSICS,OBJECT_SOURCE,,,
P2406,11052752,Transform of Cavity Mill operation failed,CAM,BASIC_FUNCTIONS,TRANSFORM,,,
P2406,11052775,UDF Feature with suppressed hole features failed,DESIGN,FEATURE_MODEL,UDF_INSERT,,,
P2406,11053358,#10749810 Regression (RuleEdgeIntersect broken again),DESIGN,SELECT_INTENT,BODY,,,
P2406,11056017,Inconsistent redirection with NXOpen bindings for Console stdout / stderr output ,SYSENG,DOCUMENTATION,UNDETERMINED,,,
P2406,11056147,Flat Pattern Attribute Flip Issue,NX_SHEET_METAL,FLAT_PATTERN,ALL,,,
P2406,11056334,Match Mesh issue,CAE,ADV_SIMULATION,MESH_CONTROL,,,
P2406,11056836,Get STEP translator error when there is no IFC translator license available,TRANSLATOR,IFC,IMPORT,,,
P2406,11057302,Unable to find unsplit faces,KDA,MOLDWIZARD,OTHER,,,
P2406,11058271,"Incorrect behavior of the drawing revision ID when \saving as\"" drawings in NX""",NXMANAGER,FILE_SAVE_AS,REVISE,,,
P2406,11058559,UDF Feature with suppressed hole features failed,DESIGN,FEATURE_MODEL,UDF_INSERT,,,
P2406,11059508,MCD simulation with PhysX Solver faulty,MECHATRONICS,BASIC_PHYSICS,OBJECT_SOURCE,,,
P2406,11060927,Error in Exporting The Model to OCX XML file ,SHIP_DESIGN,MODELING,ALL,,,
P2406,11066013,HD_Samho_Inner Hull_ Cutout function,SHIP_DESIGN,STEEL_FEATURES,CUTOUT,,,
P2406,11067490,A tag was passed belonging to an object that could not be found,DESIGN,WAVE,LINKED_BODIES,,,
P2406,12000134,NXMGR: Documentation on importing Logical Rules into Teamcenter,NXMANAGER,DOCUMENTATION,ALL,,,
P2406,12000249,Launching NX from AWC about environments does not support space in ugii_base_dir,NXMANAGER,ACTIVEWORKSPACE,ALL,,,
P2406,12000488,Snapshot not correctly applied,CAE,ADV_SIMULATION,POST_OTHER,,,
P2406,12000868,Error importing Ansys .inp,CAE,ADV_SIMULATION,ANSYS_IMPORT,,,
P2406,12001495,Issue with Multi-Axis Roughing - Error in External Library,CAM,MULTIAXIS_ROUGH,ALL,,,
P2406,12001598,NX leave some uncut area when use the intol/outtol = 0.02,CAM,CAVITY_MILLING,OTHER,,,
P2406,12001851,"[CAD]For the \Part Cleanup\"" documentation issue.""",GATEWAY,DOCUMENTATION,ALL,,,
P2406,12001971,There is a problem with the translation of UGII_LANG=trad_chines,SYSENG,NXOPEN,BLOCK_STYLER,,,
P2406,12002747,"Publish PCB, Clone Assembly - Keine Auswahl von Komponenten die in der Struktur tiefer liegen als die Leiterplatte",PCB_EXCHANGE,VALIDATE,ALL,,,
P2406,12003753, Element Modify Connectivity not working in AFM,CAE,ADV_SIMULATION,ELEM_OPERATIONS,,,
P2406,12004723,PublishTDPNative.exe: JT is not attached to PDF.,TECH_DATA_PKG,TEMPLATE,FILE_NEW,,,
P2406,12006184,NXOpen Python Intellisense in NX2312 has some issues with new python stub files,SYSENG,NXOPEN,PYTHON,,,
P2406,12007067, Case NX Manufacturing Token check out does not reflect the operation being performed,CAM,FLOWCUT,ALL,,,
P2406,12007168,NX2312 NXOpen C Wizard extension does not set required C++20 standard with C++ Language option,SYSENG,NXOPEN,WIZARDS,,,
P2406,12007685,Pedestrian Protection translation issue on Japanese NX,KDA,GENERAL_PACKAGE,PEDPRO,,,
P2406,12008067,Nodal navigator - filters,CABLE_ROUTER,APPLICATION,ENVIRONMENT,,,
P2406,12008333,"\+++ UPDATE: entity 56344 is in circular chain of associative links from entity 55099\""""",ASSEMBLIES,POSITIONING,CONSTRAINTS,,,
P2406,12008631,Float / Dock keeps staying in the background,SYSENG,UI_TOOLS,RESOURCE_BAR,,,
V2406,12009216,Material Property dependency : issues when copying or editing the material ,CAE,ADV_SIMULATION,MATERIALS,,,
P2406,12012602,Renewed electrode blank sketch loses some halved positioning dimensions on reopen part since NX2212,DESIGN,SKETCHER,RENEW,,,
P2406,12012616,X-form : Proportional Scale change is impossible after Edit on NX 2306,STUDIO_DESIGN,FREE_FORM,XFORM,,,
P2406,12012617,"Refit: Preview doesn't work, pole is disappeared.",DESIGN,FREE_FORM_MODEL,REFIT_FACE,,,
P2406,12013758,Classes for custom features documentation needs improvements,DESIGN,FEATURE_MODEL,CUSTOM_FEATURE,,,
P2406,12015283,"Localization issue on \Join Hole\"" command""",JOIN,JOIN,ALL,,,
P2406,12015575,NX hangs when creating a extruded body from manufacturing sketch,DRAFTING,ANNOTATION,RUBBERBANDING,,,
P2406,12018267,NXOpen::Tooling::ToolingSession::SetWizardType needs to explain integer input value and intention,KDA,ELECTRODE_DESGN,OTHERS,,,
P2406,12019312,"Motion Math Function, ElementTY(MOTION_<drivername>_RZ,i) crashes Motion Application",CAE,MOTION,FUNCTION,,,
P2406,12019954,NXOpen::MechanicalRouting classes have internal NX_NO_DOC condition but full journaling coverage,RSD_GENERAL,ADMINISTRATION,CUSTOMIZATION,,,
P2406,12024249,Variable Guiding Curves,CAM,GUIDING_CURVE,VARIABLE_AXIS,,,
P2406,12025067,A custom symbol is not exported when translating to DWG.,TRANSLATOR,DXF_DWG,EXPORT_DRAFTING,,,