Delcam FeatureCam 2012 R3 SP2
Delcam FeatureCam 2012 R3 SP2 | 1.3 Gb
The 2012 R3 release of FeatureCAM includes important new strategies for roughing and turn-mill operations, alongside a range of more general enhancements to allow faster toolpath generation.
FeatureCAM was the world’s first feature-based programming software when it was launched in 1995. Constant development since then has ensured that the system has retained its leadership in programming speed and ease of use, while an increased range of strategies has been added to provide more efficient toolpaths giving greater machine productivity.
The main addition to FeatureCAM 2012 R3 is a series of new strategies for 2.5D roughing. These include a continuous spiral option to minimise wear on the cutter and machine tool, high-speed roughing options, including trochoidal machining and Delcam’s patented Race Line Machining, and "tear-drop” moves to clear corners more smoothly. In addition, more styles of leads and links can now be used to give greater overall efficiency for the toolpaths.
More flexible functionality in FeatureCAM 2012 R3 gives you more powerful machining capability.
- Inserting G-Code Using Toolpath Edit Dialog
FeatureCAM now gives you the ability to easily enter custom G-code into the NC program, such as M00 and M01. Flexibility is further increased with the ability to add multiple lines of G-code into your part program using this new feature.
- Paste Special Function
Make bulk edits to multiple features such as holes by editing one and then pasting the attributes onto many others at once. This can rapidly speed up the programming process, helping deliver parts quicker.
- Soft Errors
A new enhancement allows you to be more productive by simulating toolpaths when they have “Soft Errors”. Soft Errors such as the missing Feeds and Speeds tables only affect the NC Code output, not the toolpath itself.
These new errors allow you to focus on the toolpaths, leaving any additional data to be organised just prior to generating NC code. As an additional safety measure, the user is prevented from saving the NC code to disk until the errors are corrected.
- Exclusive Read Only File Protection
Open FeatureCAM files will now be “exclusive” to the first user that opens them. This enables FeatureCAM to prevent two users from saving on top of each other’s changes by only allowing the second user to open a read-only copy of the first user’s file. When this occurs, a warning is issued to the second user if already open by another.
- New Usability Improvements
The new usability improvements in FeatureCAM 2012 R3 include: Shade the stock material for clarification of starting material, Change multiple priority settings from the Operation List instead of one at a time, Select holes by their diameter or depth, Enhanced ease-of-use with the Total Stock attribute is now available for finish passes as well as existing rough passes.
- and more…….
What’s New 2012 R3 Videos: http://www.delcam.tv/
FIXED MTT: Turnmilling: Face mill tool with corner radius gouges profile
FIXED GPF: Feed/Speed: Customer reports GPF at a certain address. used crashfinder to find ezfm linenumber, which is the bottom one here:
FIXED Install: Want to copy the file from addins\FeatureCAMToNCSIMUL\Localization to the addins folder based on the installation language (similar to how we copy language dlls).
FIXED turn/mill: optimize spotdrill/chamfer/countersink does not honor tool override for millturn parts
FIXED Turn/mill: large retract when moving from B0 to B90 feature exceeds machine limits
FIXED TPEDIT: tpedit made from turn feature shows duplicate entires in tools page
FIXED FC TPEDIT: coolant: debug text left in.
FIXED FC 3d sim: Tool orientation wrong when a setup has 2-axis after a 5-axis swarf on subspindle .
FIXED XBUILD: <has-tool> should be available for milling documents.
FIXED FC-PMP: we don't support posting turning or wire edm through pmp so we should prevent user from trying.
FIXED mtt: turnmilling: program point from tool edge: OD face followed by ID face with same tool results in ID face using the wrong programming point.
FIXED FC FC-PMP: User interface: Loading of pmopt-post by drag and drop isn't available.
FIXED FC Turn: FC detects wrong start/end point using canned cycle
FIXED FC-PMP: the Post Options dialog mentions CNC even when working with PMOPT files.
FIXED D,FC FC-PMP: feed value is wrong in some cases for metric parts.
FIXED mtt: Turnmilling. time estimations are way off which makes centerline sim really slow.
FIXED FC MTT: Turnmilling: Rough toolpath of face cycle with X-oriented tool has unnecessary large offset from profile
FIXED Machine sim: 5-axis simultaneous: Singularity of toolaxis (0,1,0) (A/B machine) results in bad sim.
FIXED D,FC Testing framework: Upgrade .exe tests to VS10. marketing should ignore
FIXED 2-axis Milling: horsepower missing when using lefthanded tools.
FIXED FC MTT: Turnmilling: tool edge goes through profile and gouges part.
FIXED Turn/Mill: TPEdit: Xbuild: This tpedit feature following a bore triggers Z-Rapid format with no valid Z Coordinate
FIXED FC mtt: TurnMilling: (rough) turning with an endmill leaves too much material for finishing
FIXED FC NCSIMUL: Macro shouldn't check out license. It should check whether the module is licensed and currently checked out
FIXED FC 2-axis milling: left hand tool causes negative spindle speed and feed rate intsupport#52917
FIXED FC FC-PMP: User interface: File Extension for the NC code file isn't added to file name in the "Save NC" dialog.
FIXED D,FC FC-PMP: FeatureCAM doesn't support output of total time needed to cut NC program that posted from PMP
FIXED Wire EDM: When Lead Angle is disabled, the angle box should go inactive
FIXED 2-axis milling: thread milling: Dialog says angle of a thread must be between -85.0 and 85.0, but in reality it must be between 0 and 85.0.
FIXED mtt: turnmilling: desire option to touch-off tool like a turn tool (TOOLPATH and UI SIDE). Increased flexibility for the touch-off point for the shell mill used in the turnmilling toolpath.
FIXED D,FC FC-PMP: Drilling parameters are output wrong values to nc-code.
FIXED GPF: Feed/Speed: Customer reports GPF at a certain address. used crashfinder to find ezfm linenumber, which is the bottom one here:
FIXED Install: Want to copy the file from addins\FeatureCAMToNCSIMUL\Localization to the addins folder based on the installation language (similar to how we copy language dlls).
FIXED turn/mill: optimize spotdrill/chamfer/countersink does not honor tool override for millturn parts
FIXED Turn/mill: large retract when moving from B0 to B90 feature exceeds machine limits
FIXED TPEDIT: tpedit made from turn feature shows duplicate entires in tools page
FIXED FC TPEDIT: coolant: debug text left in.
FIXED FC 3d sim: Tool orientation wrong when a setup has 2-axis after a 5-axis swarf on subspindle .
FIXED XBUILD: <has-tool> should be available for milling documents.
FIXED FC-PMP: we don't support posting turning or wire edm through pmp so we should prevent user from trying.
FIXED mtt: turnmilling: program point from tool edge: OD face followed by ID face with same tool results in ID face using the wrong programming point.
FIXED FC FC-PMP: User interface: Loading of pmopt-post by drag and drop isn't available.
FIXED FC Turn: FC detects wrong start/end point using canned cycle
FIXED FC-PMP: the Post Options dialog mentions CNC even when working with PMOPT files.
FIXED D,FC FC-PMP: feed value is wrong in some cases for metric parts.
FIXED mtt: Turnmilling. time estimations are way off which makes centerline sim really slow.
FIXED FC MTT: Turnmilling: Rough toolpath of face cycle with X-oriented tool has unnecessary large offset from profile
FIXED Machine sim: 5-axis simultaneous: Singularity of toolaxis (0,1,0) (A/B machine) results in bad sim.
FIXED D,FC Testing framework: Upgrade .exe tests to VS10. marketing should ignore
FIXED 2-axis Milling: horsepower missing when using lefthanded tools.
FIXED FC MTT: Turnmilling: tool edge goes through profile and gouges part.
FIXED Turn/Mill: TPEdit: Xbuild: This tpedit feature following a bore triggers Z-Rapid format with no valid Z Coordinate
FIXED FC mtt: TurnMilling: (rough) turning with an endmill leaves too much material for finishing
FIXED FC NCSIMUL: Macro shouldn't check out license. It should check whether the module is licensed and currently checked out
FIXED FC 2-axis milling: left hand tool causes negative spindle speed and feed rate intsupport#52917
FIXED FC FC-PMP: User interface: File Extension for the NC code file isn't added to file name in the "Save NC" dialog.
FIXED D,FC FC-PMP: FeatureCAM doesn't support output of total time needed to cut NC program that posted from PMP
FIXED Wire EDM: When Lead Angle is disabled, the angle box should go inactive
FIXED 2-axis milling: thread milling: Dialog says angle of a thread must be between -85.0 and 85.0, but in reality it must be between 0 and 85.0.
FIXED mtt: turnmilling: desire option to touch-off tool like a turn tool (TOOLPATH and UI SIDE). Increased flexibility for the touch-off point for the shell mill used in the turnmilling toolpath.
FIXED D,FC FC-PMP: Drilling parameters are output wrong values to nc-code.
About Delcam plc
Delcam is a world-leading developer and supplier of advanced CADCAM software, with more than 35,000 customers in over 80 countries. These clients vary from global names like Nike, Boeing and Mattel to small start-ups and individual craftsmen. Founded 30 years ago, we are the largest developer of product development software in the UK, with subsidiaries in Europe, America and Asia. Our global success has been recognised with many awards, including three Queen’s Awards for Enterprise in the last six years.
Delcam FeatureCam 2012 R3 SP2
visit my blog
Name: Delcam FeatureCam 2012
Version: R3 SP2 Build 18.9.1.23
Home: www.featurecam.com
Interface: multilanguage
OS: Windows XP / Vista / Seven
Size: 1.3 Gb
All parts on filepost.com, depositfiles.com, rapidgator.com, luckyshare.net interchanged. It is added by 5% of the overall size of the archive of information for the restoration
No mirrors please
No mirrors please