Cadence Virtuoso, Release Version IC6.1.8 Base
Cadence Virtuoso, Release Version IC6.1.8 Base | 6.2 Gb
Cadence Design Systems, Inc. , the leader in global electronic design innovation, has unveiled Virtuoso, Release Version IC6.1.8 Base m is a holistic, system-based solution that provides the functionality to drive simulation and LVS-clean layout of ICs and packages from a single schematic.
CCRs Fixed in IC6.1.8 and/or ICADVM18.1 - Date: October 2018
Note: This CCR list represents those CCRs that were first addressed in the IC6.1.8 and/or ICADVM18.1 BASE releases.
1974573 ELI-00111 message should not be shown when eliStart is successful
1970943 Auto via needs to recognize trim layers
1970417 Failure while extracting power intent of a design using Virtuoso Power Manager
1969285 Align command form in VLS L unresponsive to mouse clicks
1965813 During layer export to Sigrity the xy-coordinates of some shapes get shifted
1965753 Unable to select options in VLS L Align form
1963563 Always consider corners and variables in Setup Library as enabled
1963494 Failure in OpenAccess database with 1801 Import
1963146 Wire Assistant override should be considered by Simulation Driven Routing when autosizing wires and vias (biggest value should be considered)
1963135 autoTwig issues with clustered devices
1962094 pv function does not work with Monte Carlo
1959842 OpenAccess crashes while extracting power intent
1959229 Crash while setting Eye Diagrams plot with Intensity set to 'invisible'
1956598 Pnoise frequency specification issue for integrated noise in noise summary
1954605 Exclude layers incorrect results issue when highlighting a floating net
1954200 Saving view as Verilog file causes crash
1953887 Virtuoso RF - OA2SIP - Embedded Component - Pin converts to Via
1953031 Simulation Driven Routing is not using correct EAD API to get terminal current
1951702 Virtuoso RF - SIP2OA/OA2SIP - Embedded Component Support is needed
1951044 Crash while loading simulation results
1945806 Segmentation fault during plotting with parametric simulation
1942301 tcDump/tcLoad breaks constraint group
1940381 Copy updater does not handle update of encrypted property in smart extracted view if library is copied
1940140 Notify markers are out of place for Edit In Place in rotated/flipped cellview
1937320 Pin/Net Name Collision in schematic editor sets the default value to be ignored
1936895 StreamOut fails when via purpose is specified in mature node releases
1934954 F9 bindkey in layout bound to deprecated function should use geToggleDisplayResolution()
1932174 SCH-1285 error with schHiCreateInst function
1929699 Setting an initial condition or nodeset using VAR expressions fails if signal contains an underscore
1927784 User object selection filter not working properly with MPT support
1926287 Instance and Cell filters in the Fault Rules form do not work together
1925130 AutoTwig twig segments should match pin widths
1925113 AutoTwig does not detect the pin access direction correctly
1924900 AutoTwig target finder stops because of polygon bounding box
1923667 slot generation fails on polygon with 45° shape with different width as upper/lower horizontal shape
1923386 parameter form not displaying correctly
1922716 Virtuoso stops unexpectedly during extraction
1922055 ADE Verifier: error 80263 run simulation externally when data summary save at current cellview
1921139 pcSkillGen does not dump correct tool/data type while dumping a schematic cellview
1918680 Wrong number of terminals in xDSPF in EV2.0 flow
1918630 Erroneous line break in xDSPF in EV2.0 flow
1917103 DRD Enforce is not showing short of two nets in Edit in Place mode
1914893 Pins are getting deleted in Extract Step in Abstract generator
1911621 Grid Pattern Editor: Order of the instances gets jumbled up
1911144 LEF ANTENNAPARTIALMETALAREA antenna info reports pin area - makes Innovus antenna check fail
1909591 ADE shows incorrect results when corner settings conflict with transient dynamic parameters
1909347 Fault Setup Assistant picks up a wrong DUT that is configured as External HDL
1903225 Virtuoso exists unexpectedly following ASSEMBLER-2403 error
1902680 Deleting implementation causes ERROR (Verifier-80188) while ADE Verifier is running simulations
1899488 lineread reports false SKILL syntax error while reading a large DPL
1898466 Create Pin displays a ghost shape
1897763 ADE Assembler: Deleting multiple histories using Delete Simulation Data - Delete All except Netlists deletes only one history
1895818 Lowercase library name changes to Uppercase using tab key
1894289 VSR creating shorts when alternate path is available
1893779 Routing with presets causes errors
1893485 Report Identical Histories does not work for particular case
1892116 Waveforms from different tests do not refresh correctly when in the same window
1889372 Circuit Conditions incorrectly highlighting Linear MOS devices that are in saturation for bsimbulk model
1888059 Xstream in with noDetectVias false results in wrong geometry
1884698 Could not inject faults in all the devices of ring oscillator
1882350 Launching the Navigator and clicking on figGroups causes Virtuoso to stop unexpectedly
1882117 SKILL deleteFile gives error for non-existent file on read-only file system
1880850 Expand Cursors available in GE to support Balloons in schematics
1880476 Virtuoso exits unexpectedly when creating EMH during UPF 1801 import
1879332 Routing object granularity issue with 45 degree segments
1874786 When recursively building a table, with references to parent tables, trace causes a near-infinite loop
1873708 Multiple verifier CV can not be referenced when they have common implementation
1870260 Selecting schematic symbols after descending to lower level panned the cross-probed layout instance off its center
1870168 fboundp returns '2', not t/nil per documentation, and it is not actually a function but a scheme var value
1865726 AMS compilation failed in IC6.1.7 with compression enabled
1862690 Ignore Instances mark disappears when cell is copied
1862580 Create Path with a slot outputs meaningless WARNING in CIW
1858789 SKILL outfile function forces garbage collection whenever file cannot be opened for writing
1858774 Incorrect color display, should be blue instead of red
1857233 A schematic device with nlaction set to ignore copied to new device will not show nlaction X in display
1856269 Coverage percentage changing when 'Generate Coverage' icon is clicked multiple times in ADE Verifier
1856101 Model sweep inside corner is not reported in Coverage (ADE Verifier)
1856095 RMB->Sync for variables and corners does not work most of the time
1855126 Getting AntennaPartialMetalArea though all the metal has already been converted to pin
1854806 If you copy an ignored instance the visual indicator is not displayed unless you close and reopen the design
1854723 Add indication for modified variables and corners
1851413 multiple errors while Set Owners for Selected Requirements pop up for each selected item
1851377 Incorrect markNet results on selected via array
1851298 'disable reload' function does not remain when you perform a reload
1851013 Dynamic Zoom (Zoom To Fit) is functioning even if setting is OFF with VLS XL environment
1850686 hiSetShadowMode does not work in IC6.1.7
1849382 Allow owner views across different cells
1845994 Value field has new ellipsis limiting width after removal of nameDisplayWidthInDataView from ADE XL
1845378 In ADE XL certain calculator expressions based upon the value function produce incorrect results
1843163 The Outline Color is displayed instead of the Fill Color when Fill Style is 'X'
1842900 Flattening large data set results in a database that cannot be opened
1837060 Provide ability to cross-probe LVS from design differences in annotation browser
1828096 Provide better error messages for Op Region Spec output with non-existing devices
1825231 VSE: small structures in symbols not rendered correctly in IC6.1.7
1822465 via is not stable for the auto mode of 'create via'
1817768 VSR created scenic routing
1814013 PCell designer: fluid Pcell callbacks are not getting triggered in the current session
1811949 Pcell evaluation fails with error XSTRM-231 for ITDB techlib but works for standard techlib
1811760 Virtuoso applications causing data integrity issues –> Generating _repair.tgz and _DBData.tar.gz tarballs
1809265 Defmethod gives warning in IC6.1.7 which was not the case in IC6.1.6
1805386 VRF build provided has a broken link - possibly SUSE12 issue
1805259 maeRunSimulation does not honor 'Report Identical Histories Before Run'
1802796 wrealIOConv SMG cell produced error NOIPRT in systemVerilog model generation
1794843 Enhancement request related to status of Abstract Generator license
1792957 Shielding makes jogs and does use other layers
1791895 ViVA XL 'Disable Reload' does not work in IC6.1.7
1791336 Connect Shapes on The Same Net' option in 'Create Via' is not consistent with UI envGetVal
1787173 EDIFOUT operations fails when exporting a cellview
1786173 The 'value' function converts the value of a bus to an incorrect format in a waveform
1781459 Incorrect antenna values are returned if signal extraction is enabled
1781279 group bbox not displayed correctly after copy hierarchy
1780047 incorrect order of inherited implicit terminals in subckt instantiation in CDL netlist due to auCdlCDFPinCntrl=t
1779471 CDL OUT: Incorrect port order of inherited connections
1776177 dbReOpenBag does not retain the value for lockWCount
1775622 Reduce the routing runtime for designs
1768154 VSR - fix length is not adding dangles to some pathsegs
1750237 Allow to include referenced requirements from a cellview even if ADE Verifier already has some local requirements
1747012 Set the Pin/Net Name Collision check to Warning by default
1745979 update function should not follow referenced implementation
1745547 AMS Unified Netlister becomes unusably slow
1734666 Virtuoso exits unexpectedly while routing the design with DRD on and all hierarchy visible
1732666 Editing modgen size in Grid Pattern Editor destroys previously defined pattern
1719188 VSR extracting whole net even when extracted pin style is set to Connected Shapes on Same Layer""
1715223 Virtuoso stops unexpectedly when deleting a wire with two segments
1715160 HED: File - Save as Verilog with 'External HDL' causes Virtuoso to exit unexpectedly
1704319 Icons for data-managed cells are not loaded in Library manager when a not legal library name exists in the cds.lib file
1696972 Allow the same implementation to be used in the current and imported/referenced CV
1677117 List the ADE Verifier license in the 'Software Product License Management' form
1677022 Improve the refresh speed of ADE Verifier
1674823 Add option to create new top verification view linked to multiple existing verifier views
1636883 UNL's Automatic package handling functionality is extremely slow
1623792 Grid Pattern Editor: modifying the aspect ratio reverts orientation to R0
1620721 Add support to add requirements to an ADE Verifier child session
1612839 ADE Verifier license is not listed in the 'Software Product License Management' form
1596494 create a hierarchical ADE Verifier setup
1585008 save/restart support for psfxl when running AMS
1581544 Enhance the tool to display log file greater than 2GB
1565615 Enhance the tool to display log file greater than 2GB
1551944 Fill color defined by drf does not influence the layout canvas
1538021 Virtuoso exits unexpectedly after closing a spectre output window opened from Output panel - RMB on expression
1534547 port will become analog if connected to pass gate with other terminal of pass gate connected to stdcell
1519954 Remote simulation fails in interactive mode in ADE XL
1495177 strmout with enableColoring and flattenVias is very slow
1492154 Performance issue in flattening with Pcell-based colored data
1448621 Fluid edit functionality not working properly with Express Pcell cache
1338168 Virtuoso hangs when the size of the spectre.out file exceeds 2 GB
1269756 The 'dataTypes' and 'outputs' ('type' argument) commands not working in OCEAN
1203465 The 'dataTypes' and 'outputs' ('type' argument) commands not working in OCEAN
1158354 The OCEAN command 'dataTypes()' does not return the data type for tran simulation voltage and current signals
1970943 Auto via needs to recognize trim layers
1970417 Failure while extracting power intent of a design using Virtuoso Power Manager
1969285 Align command form in VLS L unresponsive to mouse clicks
1965813 During layer export to Sigrity the xy-coordinates of some shapes get shifted
1965753 Unable to select options in VLS L Align form
1963563 Always consider corners and variables in Setup Library as enabled
1963494 Failure in OpenAccess database with 1801 Import
1963146 Wire Assistant override should be considered by Simulation Driven Routing when autosizing wires and vias (biggest value should be considered)
1963135 autoTwig issues with clustered devices
1962094 pv function does not work with Monte Carlo
1959842 OpenAccess crashes while extracting power intent
1959229 Crash while setting Eye Diagrams plot with Intensity set to 'invisible'
1956598 Pnoise frequency specification issue for integrated noise in noise summary
1954605 Exclude layers incorrect results issue when highlighting a floating net
1954200 Saving view as Verilog file causes crash
1953887 Virtuoso RF - OA2SIP - Embedded Component - Pin converts to Via
1953031 Simulation Driven Routing is not using correct EAD API to get terminal current
1951702 Virtuoso RF - SIP2OA/OA2SIP - Embedded Component Support is needed
1951044 Crash while loading simulation results
1945806 Segmentation fault during plotting with parametric simulation
1942301 tcDump/tcLoad breaks constraint group
1940381 Copy updater does not handle update of encrypted property in smart extracted view if library is copied
1940140 Notify markers are out of place for Edit In Place in rotated/flipped cellview
1937320 Pin/Net Name Collision in schematic editor sets the default value to be ignored
1936895 StreamOut fails when via purpose is specified in mature node releases
1934954 F9 bindkey in layout bound to deprecated function should use geToggleDisplayResolution()
1932174 SCH-1285 error with schHiCreateInst function
1929699 Setting an initial condition or nodeset using VAR expressions fails if signal contains an underscore
1927784 User object selection filter not working properly with MPT support
1926287 Instance and Cell filters in the Fault Rules form do not work together
1925130 AutoTwig twig segments should match pin widths
1925113 AutoTwig does not detect the pin access direction correctly
1924900 AutoTwig target finder stops because of polygon bounding box
1923667 slot generation fails on polygon with 45° shape with different width as upper/lower horizontal shape
1923386 parameter form not displaying correctly
1922716 Virtuoso stops unexpectedly during extraction
1922055 ADE Verifier: error 80263 run simulation externally when data summary save at current cellview
1921139 pcSkillGen does not dump correct tool/data type while dumping a schematic cellview
1918680 Wrong number of terminals in xDSPF in EV2.0 flow
1918630 Erroneous line break in xDSPF in EV2.0 flow
1917103 DRD Enforce is not showing short of two nets in Edit in Place mode
1914893 Pins are getting deleted in Extract Step in Abstract generator
1911621 Grid Pattern Editor: Order of the instances gets jumbled up
1911144 LEF ANTENNAPARTIALMETALAREA antenna info reports pin area - makes Innovus antenna check fail
1909591 ADE shows incorrect results when corner settings conflict with transient dynamic parameters
1909347 Fault Setup Assistant picks up a wrong DUT that is configured as External HDL
1903225 Virtuoso exists unexpectedly following ASSEMBLER-2403 error
1902680 Deleting implementation causes ERROR (Verifier-80188) while ADE Verifier is running simulations
1899488 lineread reports false SKILL syntax error while reading a large DPL
1898466 Create Pin displays a ghost shape
1897763 ADE Assembler: Deleting multiple histories using Delete Simulation Data - Delete All except Netlists deletes only one history
1895818 Lowercase library name changes to Uppercase using tab key
1894289 VSR creating shorts when alternate path is available
1893779 Routing with presets causes errors
1893485 Report Identical Histories does not work for particular case
1892116 Waveforms from different tests do not refresh correctly when in the same window
1889372 Circuit Conditions incorrectly highlighting Linear MOS devices that are in saturation for bsimbulk model
1888059 Xstream in with noDetectVias false results in wrong geometry
1884698 Could not inject faults in all the devices of ring oscillator
1882350 Launching the Navigator and clicking on figGroups causes Virtuoso to stop unexpectedly
1882117 SKILL deleteFile gives error for non-existent file on read-only file system
1880850 Expand Cursors available in GE to support Balloons in schematics
1880476 Virtuoso exits unexpectedly when creating EMH during UPF 1801 import
1879332 Routing object granularity issue with 45 degree segments
1874786 When recursively building a table, with references to parent tables, trace causes a near-infinite loop
1873708 Multiple verifier CV can not be referenced when they have common implementation
1870260 Selecting schematic symbols after descending to lower level panned the cross-probed layout instance off its center
1870168 fboundp returns '2', not t/nil per documentation, and it is not actually a function but a scheme var value
1865726 AMS compilation failed in IC6.1.7 with compression enabled
1862690 Ignore Instances mark disappears when cell is copied
1862580 Create Path with a slot outputs meaningless WARNING in CIW
1858789 SKILL outfile function forces garbage collection whenever file cannot be opened for writing
1858774 Incorrect color display, should be blue instead of red
1857233 A schematic device with nlaction set to ignore copied to new device will not show nlaction X in display
1856269 Coverage percentage changing when 'Generate Coverage' icon is clicked multiple times in ADE Verifier
1856101 Model sweep inside corner is not reported in Coverage (ADE Verifier)
1856095 RMB->Sync for variables and corners does not work most of the time
1855126 Getting AntennaPartialMetalArea though all the metal has already been converted to pin
1854806 If you copy an ignored instance the visual indicator is not displayed unless you close and reopen the design
1854723 Add indication for modified variables and corners
1851413 multiple errors while Set Owners for Selected Requirements pop up for each selected item
1851377 Incorrect markNet results on selected via array
1851298 'disable reload' function does not remain when you perform a reload
1851013 Dynamic Zoom (Zoom To Fit) is functioning even if setting is OFF with VLS XL environment
1850686 hiSetShadowMode does not work in IC6.1.7
1849382 Allow owner views across different cells
1845994 Value field has new ellipsis limiting width after removal of nameDisplayWidthInDataView from ADE XL
1845378 In ADE XL certain calculator expressions based upon the value function produce incorrect results
1843163 The Outline Color is displayed instead of the Fill Color when Fill Style is 'X'
1842900 Flattening large data set results in a database that cannot be opened
1837060 Provide ability to cross-probe LVS from design differences in annotation browser
1828096 Provide better error messages for Op Region Spec output with non-existing devices
1825231 VSE: small structures in symbols not rendered correctly in IC6.1.7
1822465 via is not stable for the auto mode of 'create via'
1817768 VSR created scenic routing
1814013 PCell designer: fluid Pcell callbacks are not getting triggered in the current session
1811949 Pcell evaluation fails with error XSTRM-231 for ITDB techlib but works for standard techlib
1811760 Virtuoso applications causing data integrity issues –> Generating _repair.tgz and _DBData.tar.gz tarballs
1809265 Defmethod gives warning in IC6.1.7 which was not the case in IC6.1.6
1805386 VRF build provided has a broken link - possibly SUSE12 issue
1805259 maeRunSimulation does not honor 'Report Identical Histories Before Run'
1802796 wrealIOConv SMG cell produced error NOIPRT in systemVerilog model generation
1794843 Enhancement request related to status of Abstract Generator license
1792957 Shielding makes jogs and does use other layers
1791895 ViVA XL 'Disable Reload' does not work in IC6.1.7
1791336 Connect Shapes on The Same Net' option in 'Create Via' is not consistent with UI envGetVal
1787173 EDIFOUT operations fails when exporting a cellview
1786173 The 'value' function converts the value of a bus to an incorrect format in a waveform
1781459 Incorrect antenna values are returned if signal extraction is enabled
1781279 group bbox not displayed correctly after copy hierarchy
1780047 incorrect order of inherited implicit terminals in subckt instantiation in CDL netlist due to auCdlCDFPinCntrl=t
1779471 CDL OUT: Incorrect port order of inherited connections
1776177 dbReOpenBag does not retain the value for lockWCount
1775622 Reduce the routing runtime for designs
1768154 VSR - fix length is not adding dangles to some pathsegs
1750237 Allow to include referenced requirements from a cellview even if ADE Verifier already has some local requirements
1747012 Set the Pin/Net Name Collision check to Warning by default
1745979 update function should not follow referenced implementation
1745547 AMS Unified Netlister becomes unusably slow
1734666 Virtuoso exits unexpectedly while routing the design with DRD on and all hierarchy visible
1732666 Editing modgen size in Grid Pattern Editor destroys previously defined pattern
1719188 VSR extracting whole net even when extracted pin style is set to Connected Shapes on Same Layer""
1715223 Virtuoso stops unexpectedly when deleting a wire with two segments
1715160 HED: File - Save as Verilog with 'External HDL' causes Virtuoso to exit unexpectedly
1704319 Icons for data-managed cells are not loaded in Library manager when a not legal library name exists in the cds.lib file
1696972 Allow the same implementation to be used in the current and imported/referenced CV
1677117 List the ADE Verifier license in the 'Software Product License Management' form
1677022 Improve the refresh speed of ADE Verifier
1674823 Add option to create new top verification view linked to multiple existing verifier views
1636883 UNL's Automatic package handling functionality is extremely slow
1623792 Grid Pattern Editor: modifying the aspect ratio reverts orientation to R0
1620721 Add support to add requirements to an ADE Verifier child session
1612839 ADE Verifier license is not listed in the 'Software Product License Management' form
1596494 create a hierarchical ADE Verifier setup
1585008 save/restart support for psfxl when running AMS
1581544 Enhance the tool to display log file greater than 2GB
1565615 Enhance the tool to display log file greater than 2GB
1551944 Fill color defined by drf does not influence the layout canvas
1538021 Virtuoso exits unexpectedly after closing a spectre output window opened from Output panel - RMB on expression
1534547 port will become analog if connected to pass gate with other terminal of pass gate connected to stdcell
1519954 Remote simulation fails in interactive mode in ADE XL
1495177 strmout with enableColoring and flattenVias is very slow
1492154 Performance issue in flattening with Pcell-based colored data
1448621 Fluid edit functionality not working properly with Express Pcell cache
1338168 Virtuoso hangs when the size of the spectre.out file exceeds 2 GB
1269756 The 'dataTypes' and 'outputs' ('type' argument) commands not working in OCEAN
1203465 The 'dataTypes' and 'outputs' ('type' argument) commands not working in OCEAN
1158354 The OCEAN command 'dataTypes()' does not return the data type for tran simulation voltage and current signals
The Cadence Virtuoso System Design Platform links two world-class Cadence technologies—custom IC design and package/PCB design/analysis—creating a holistic methodology that automates and streamlines the design and verification flow for multi-die heterogeneous systems.
Leveraging the Virtuoso Schematic Editor and the Virtuoso Analog Design Environment, it provides a single platform for IC-and package/system-level design capture, analysis, and verification. In addition, the Virtuoso System Design Platform provides an automated bidirectional interface with the Cadence SiP-level implementation environment and Clarity 3d Solver.
The Virtuoso System Design Platform allows IC designers to easily include system-level layout parasitics in the IC verification flow, enabling time savings by combining package/board layout connectivity data with the IC layout parasitic electrical model. The automatically generated “system-aware” schematic that results can then be easily used to create a testbench for final circuit-level simulation. The Virtuoso System Design Platform automates this entire flow, eliminating the highly manual and error-prone process of integrating system-level layout parasitic models back into the IC designer’s flow.
Cadence Virtuoso: Introduction
This video shows the basic introduction to one of the most used IC design tools in the industry and academia - Cadence virtuoso. It also shows how to edit schematic design in cadence virtuoso.
Cadence is a pivotal leader in electronic design and computational expertise, using its Intelligent System Design strategy to turn design concepts into reality. Cadence customers are the world’s most creative and innovative companies, delivering extraordinary electronic products from chips to boards to systems for the most dynamic market applications.
Product: Cadence Virtuoso
Version: IC06.18.000 Base Release *
Supported Architectures: x86_64
Website Home Page : www.cadence.com
Languages Supported: english
System Requirements: Linux **
Size: 6.2 Gb
–––––––––––––––––––––––––––––––––––––
Standalone Software Shipped with IC6.1.8
–––––––––––––––––––––––––––––––––––––
Virtuoso Power System L (IC6.1.8)
Voltus-Fi Custom Power Integrity Solution - XL IC6.1.8
–––––––––––––––––––––––––––––––––––––
Cadence Product Releases Compatible with IC6.1.8
–––––––––––––––––––––––––––––––––––––
Spectre Circuit Simulators………………………..(SPECTRE 18.10.143)
Pegasus /Physical Verification System………………(PEGASUS 18.20.001)
Physical Verification System………………………(PVS 16.12.000)
Assura Physical Verification………………………(ASSURA 04.15.116)
XCELIUM…………………………………………(XCELIUMMAIN 18.03.012)
Conformal……………………………………….(CONFRML 18.10.300)
Innovus…………………………………………(INNOVUS 18.10.000)
Extraction Tools (QRC/Quantus QRC)…………………(EXT 18.12.000)
Allegro Sigrity………………………………….(SIG 18.00.000)
Silicon-Package-Board Co-Design……………………(SPB 17.20.047)
*The latest PVS16.1x binary can be obtained from: http://downloads.cadence.com
Standalone Software Shipped with IC6.1.8
–––––––––––––––––––––––––––––––––––––
Virtuoso Power System L (IC6.1.8)
Voltus-Fi Custom Power Integrity Solution - XL IC6.1.8
–––––––––––––––––––––––––––––––––––––
Cadence Product Releases Compatible with IC6.1.8
–––––––––––––––––––––––––––––––––––––
Spectre Circuit Simulators………………………..(SPECTRE 18.10.143)
Pegasus /Physical Verification System………………(PEGASUS 18.20.001)
Physical Verification System………………………(PVS 16.12.000)
Assura Physical Verification………………………(ASSURA 04.15.116)
XCELIUM…………………………………………(XCELIUMMAIN 18.03.012)
Conformal……………………………………….(CONFRML 18.10.300)
Innovus…………………………………………(INNOVUS 18.10.000)
Extraction Tools (QRC/Quantus QRC)…………………(EXT 18.12.000)
Allegro Sigrity………………………………….(SIG 18.00.000)
Silicon-Package-Board Co-Design……………………(SPB 17.20.047)
*The latest PVS16.1x binary can be obtained from: http://downloads.cadence.com
Supported Platforms and Operating Systems
Bitness of Operating System: x64
Architecture: x86_64
Supported OS: RHEL 6.5, RHEL 7, SLES 11, SLES 12
Bitness of Operating System: x64
Architecture: x86_64
Supported OS: RHEL 6.5, RHEL 7, SLES 11, SLES 12
Please visit my blog
Added by 3% of the overall size of the archive of information for the restoration
No mirrors please
![Cadence Virtuoso, Release Version IC6.1.8 Base]()
Added by 3% of the overall size of the archive of information for the restoration
No mirrors please
Cadence Virtuoso, Release Version IC6.1.8 Base
