CST Studio Suite 2020 SP7 Update
CST Studio Suite 2020 SP7 Update | 502.7 mb
Computer Simulation Technology (CST), part of SIMULIA, a Dassault Systèmes brand, announces the update release of its flagship EM simulation software, CST Studio Suite 2020.
Distributed Computing (DC)
- Frequency domain solver can now run distributed computing in a protected project.
- Fixed restart of jobs when CST DC SolverServer was shut down during calculation.
Biological Models
- New Bio Models Library Extension 3.2 available for download, see Biological Data help page for more information. New Feature!
CST MICROWAVE STUDIO General
- Fixed binary format of ADS co-simulation DLL.
CST MICROWAVE STUDIO Transient Solver (TLM Mesh)
- Fixed modeling of off-axis anisotropic frequency-independent materials.
CST MICROWAVE STUDIO - Frequency Domain Solver (Tetrahedral Mesh)
- In rare cases and with multiple excitations, the direct solver had set some solutions to zero.
CST MICROWAVE STUDIO - Integral Equation Solver
- Fixed radiated power calculation when perfect infinite ground is activated.
CST MICROWAVE STUDIO - Asymptotic Solver
- Less restrictive checking of simulation frequency inside frequency range of field source. Improved error message.
CST MICROWAVE STUDIO Partial RLC Solver
- Improved error message for RLC nodes that have both conducting and non-conducting material on one side.
- More accurate results if broadband computation is deactivated.
- Fixed erroneous solver stop in case of outdated cache.
- Frequency domain solver can now run distributed computing in a protected project.
- Fixed restart of jobs when CST DC SolverServer was shut down during calculation.
Biological Models
- New Bio Models Library Extension 3.2 available for download, see Biological Data help page for more information. New Feature!
CST MICROWAVE STUDIO General
- Fixed binary format of ADS co-simulation DLL.
CST MICROWAVE STUDIO Transient Solver (TLM Mesh)
- Fixed modeling of off-axis anisotropic frequency-independent materials.
CST MICROWAVE STUDIO - Frequency Domain Solver (Tetrahedral Mesh)
- In rare cases and with multiple excitations, the direct solver had set some solutions to zero.
CST MICROWAVE STUDIO - Integral Equation Solver
- Fixed radiated power calculation when perfect infinite ground is activated.
CST MICROWAVE STUDIO - Asymptotic Solver
- Less restrictive checking of simulation frequency inside frequency range of field source. Improved error message.
CST MICROWAVE STUDIO Partial RLC Solver
- Improved error message for RLC nodes that have both conducting and non-conducting material on one side.
- More accurate results if broadband computation is deactivated.
- Fixed erroneous solver stop in case of outdated cache.
CST Studio Suite 2020 SP7 Update
CST STUDIO SUITE is a collection of electromagnetic simulation software. It is an integrated design environment that contains tools for the design and optimization of devices in a wide range of frequencies from static to optical. CST Studio Suite gives customers the choice of multiple powerful solver modules, including modules based on numerous different methods including finite element method (FEM), method of moments (MoM), multilevel fast multipole method (MLFMM) and shooting boundary ray (SBR), each offering distinct advantages in their own domains.
CST STUDIO SUITE contains various modules. We are currently supporting the following modules in batch: CST MICROWAVE STUDIO (MWS), CST EM STUDIO, CST PARTICLE STUDIO, and CST MPHYSICS STUDIO. With Rescale's scalable compute workflow, users can run conveniently run CST SUDIO SUITE models on multiple cores to achieve low run times.
CST Studio Suite 2020 builds on industry-leading simulation technology with a range of new features for the design, simulation and optimization of components and systems- New features include encrypted data sharing, the next generation of Perfect Boundary Approximation (PBA), full integration of the voxel body model poser, and the hybrid solver for bidirectional hybrid coupling between all the general purpose high-frequency solvers-
The 2020 release is also available on the Dassault Systèmes 3DEXPERIENCE platform, allowing direct links to other design and simulation tools- These tools increase the agility of CST Studio Suite for modeling and simulating complex systems, and allow electromagnetic simulation to be applied in large projects spanning multiple departments and suppliers
VIAS Webinar: New Features of CST STUDIO SUITE 2020
CST is a market leader in providing 3D electromagnetic (EM) field simulation tools through a global network of sales and support staff and representatives- CST develops CST STUDIO SUITE, a package of high-performance soft-ware for the simulation of EM fields in all frequency bands- Its growing success is based on a combination of leading edge technology, a user-friendly interface and knowledge-able support staff- CST solutions are used by market leaders in a diverse range of industries, including aerospace, auto-motive, defense, electronics, healthcare and telecommuni-cations- CST is part of SIMULIA, a Dassault Systèmes brand-
Product: CST Studio Suite
Version: 2020 SP7 Update
Supported Architectures: x64
Website Home Page : www-3ds-com
Language: english
System Requirements: PC *
Software Prerequisites: CST Studio Suite 2020 and above
Size: 502.7 mb
CST Studio Suite Recommended Hardware
EM simulations can be classified as high performance computing tasks. This means that computers used for CST applications must meet high requirements in terms of CPU, RAM, and graphical specifications in order to achieve optimal performance. Sufficient power supply and cooling must also be ensured for the workstation or server. We strongly recommend buying a complete package from a brand-name manufacturer, e.g. DELL, HP, or IBM, and that the chosen hardware meets the following requirement
Processor
Minimum requirement: Intel x86-64 processor
High end server/workstation recommendation: Dual 2nd Generation Intel Xeon Scalable Processors (also known as „Cascade Lake“)
Notes for recommended hardware: We recommend high processor base clock frequency (>3 GHz) and 8-10 cores per CPU are recommended for general-purpose simulation workstation
Memory (RAM)
Minimum requirement: 16 GB
High end server/workstation recommendation: 32–64 GB per CPU
Notes for recommended hardware: We recommend fastest RAM memory modules available, currently DDR4-2933.
Graphics card
Minimum requirement: 100% OpenGL compatible graphics card
High end server/workstation recommendation: NVIDIA Quadro series card dedicated to CAD/CAE applications
Notes for recommended hardware:
Storage
Minimum requirement: 30 GB of free disk space
High end server/workstation recommendation: At least 500 GB hard disk drive
Notes for recommended hardware: SSDs may be used, but are not necessary for good simulation performance
GPU computing (optional)
Minimum requirement: Supported GPU card
High end server/workstation recommendation: High-end NVIDIA Quadro or Tesla card
Notes for recommended hardware: Please refer to the GPU computing guide
MPI computing (optional)
Minimum requirement: Dedicated compute cluster hardware
High end server/workstation recommendation:
Notes for recommended hardware: Fast network interconnects with low latency, e.g. Infiniband or Intel OmniPath, are strongly recommended. Please refer to the MPI computing guide
Distributed computing (optional)
For optimal simulation performance, the solver servers should run on separate computers from the frontend and the main controller. A fast network connection between the solvers servers, the main controller, and the frontend is recommended as simulations may generate a lot of data that needs to be transferred.
CST Studio Suite - Operating System Support
Windows 7 / Server 2008 R2 SP1
Windows 8.1 / Server 2012 R2 *
Windows 10
Windows Server 2016 **
Windows Server 2019 **
* Support can’t be guaranteed. (only for FEST3D)
** Operating system is not yet or no longer supported. Our software is not tested on this platform. (only for SPARK3D and FEST3D)
EM simulations can be classified as high performance computing tasks. This means that computers used for CST applications must meet high requirements in terms of CPU, RAM, and graphical specifications in order to achieve optimal performance. Sufficient power supply and cooling must also be ensured for the workstation or server. We strongly recommend buying a complete package from a brand-name manufacturer, e.g. DELL, HP, or IBM, and that the chosen hardware meets the following requirement
Processor
Minimum requirement: Intel x86-64 processor
High end server/workstation recommendation: Dual 2nd Generation Intel Xeon Scalable Processors (also known as „Cascade Lake“)
Notes for recommended hardware: We recommend high processor base clock frequency (>3 GHz) and 8-10 cores per CPU are recommended for general-purpose simulation workstation
Memory (RAM)
Minimum requirement: 16 GB
High end server/workstation recommendation: 32–64 GB per CPU
Notes for recommended hardware: We recommend fastest RAM memory modules available, currently DDR4-2933.
Graphics card
Minimum requirement: 100% OpenGL compatible graphics card
High end server/workstation recommendation: NVIDIA Quadro series card dedicated to CAD/CAE applications
Notes for recommended hardware:
Storage
Minimum requirement: 30 GB of free disk space
High end server/workstation recommendation: At least 500 GB hard disk drive
Notes for recommended hardware: SSDs may be used, but are not necessary for good simulation performance
GPU computing (optional)
Minimum requirement: Supported GPU card
High end server/workstation recommendation: High-end NVIDIA Quadro or Tesla card
Notes for recommended hardware: Please refer to the GPU computing guide
MPI computing (optional)
Minimum requirement: Dedicated compute cluster hardware
High end server/workstation recommendation:
Notes for recommended hardware: Fast network interconnects with low latency, e.g. Infiniband or Intel OmniPath, are strongly recommended. Please refer to the MPI computing guide
Distributed computing (optional)
For optimal simulation performance, the solver servers should run on separate computers from the frontend and the main controller. A fast network connection between the solvers servers, the main controller, and the frontend is recommended as simulations may generate a lot of data that needs to be transferred.
CST Studio Suite - Operating System Support
Windows 7 / Server 2008 R2 SP1
Windows 8.1 / Server 2012 R2 *
Windows 10
Windows Server 2016 **
Windows Server 2019 **
* Support can’t be guaranteed. (only for FEST3D)
** Operating system is not yet or no longer supported. Our software is not tested on this platform. (only for SPARK3D and FEST3D)
CST Studio Suite 2020 SP1
Please visit my blog
Added by 3% of the overall size of the archive of information for the restoration
No mirrors please
![CST Studio Suite 2020 SP7 Update]()
Please visit my blog
Added by 3% of the overall size of the archive of information for the restoration
No mirrors please
CST Studio Suite 2020 SP7 Update
