CFTurbo 10.3.4.740 | 75.1 mb
CFturbo Software & Engineering GmbH announce the release of CFTurbo 10.3.4.740, is powerful conceptual design system is a modern, software for interactive design of turbomachinery.
New in CFturbo 10.3:
General
Batch mode/ Optimization
- Flexible configuration of all available parameters and export interfaces
Undo/ Redo
- Available in all design step dialogs
CoolProp library
- Use alternatively for fluid properties
Gas mixtures
- Create user-defined gas mixtures
Display of solid body properties
- Display of mass, center of gravity, mass momentum of inertia for solid elements via context menu in the 3D model tree
Drag & Drop
- For *.CFT files into the CFturbo main window
3D-properties
- Flexible handling of element properties in the 3D model tree
Impeller/ Stator
Secondary Flow Path
- Flexible design at hub and shroud side
Variable tip clearance
- Linear transition from inlet to outlet value
Flexible rotational speed
- Separate rotational speeds per impeller
- Contra rotating impellers
Geometry conversion
- When switching from Airfoil to Meanline mode
Using multiple profile definitions
- Profile definition optionally on any span position, incl. interpolation
Impeller main dimensions
- Separate calculation of single impeller main dimensions optionally
Independent Rotor-Stator-Interface
- Rotor-Stator-Interface (RSI) decoupled from geometry
Slip modelling
- Additional slip model by Backstroem
Slip model information
- Detailed information about slip velocity calculation
Model finishing
- for the entire project
- automatically at export
ANSYS BladeGen BGI
- New export interface ANSYS BladeGen BGI (in addition to RTZT)
Meanline design
- Several new additional diagram views:
. βB in meridional view
. Wrap angle
. Wrap angle in meridional view
3D geometry import
- Import external 3D geometry data (BladeGen and internal format)
"Blade surface values" (Stanitz/ Prian)
- Available in blade profile and blade edges dialog
Additional informative display
- Stator blade design for compressors/ turbines:
. isentropic Mach number
. critical area
… and numerous other improvements
9322 crash Blade properties Changing the span count can lead to program crash (for rare blade configurations).
9320 crash Blade edges Blade geometry generation cannot handle extreme blade dimensions robustly.
9316 crash Blade edges Entering an invalid ellipse axis ratios during edge design leads to crash.
9357 major Meridional contour Hub discontinuity inside blade region erroneously detected.
9352 major Finishing Outlet RSI connection faces for vaned stators are not cantained in Flowdomain Solid faces.
9318 major Finishing Turbine blades are not extended correctly at inlet during finishing.
9281 major Export Activating RSI Connections sometimes fails to create RSI geometry.
9360 minor Blade properties Bladeangles for Stator component not correctly initialized for inner spans.
9334 minor Export Simerics: Basic filename used for export should have no special character limitations.
9324 minor Blade profiles Context menu commands for graphical design curves can sometimes apply to the wrong curve.
9323 minor Meridional contour Context menu commands for graphical design curves can sometimes apply to the wrong curve.
9313 minor Export Export dialog: Missing information about automatic solid trimming during export.
9308 minor Export Wrong command for prism-layer creation in TCFD export.
9296 minor Blade edges Trimming on leading-/trailing edge option redundant for designs with 'tangential thickness' application.
9290 minor Help NACA4 coefficient is slightly incorrect.
9287 minor Main dimensions impeller Cordier-diagram marker sometimes placed incorrectly.
9285 minor Main dimensions impeller Alternative speed parameter is missing in Batch Mode dialog.
9284 minor Blade sweep Axial position parameter is missing in Batch Mode dialog.
9082 minor Export OpenFOAM: Sometimes impeller segments cannot be triangulated.
9346 tweak Batch mode Fix multiple cosmetic issues of the Batchmode dialog.
9312 tweak Import Geometry Missing user warning that the project will be closed, when opening the import dialog.
9294 tweak Global setup Clarify warning messages about specific speed.
9286 tweak Blade sweep The "Undo/Redo" command in Designstep-dialogs sometimes doesn't refresh the dialog completely.
9226 tweak General Clarify warning message about "Invalid Characters" in Export dialog.
9099 tweak Main dimensions impeller More information about estimated pressure differences for axial fans
9320 crash Blade edges Blade geometry generation cannot handle extreme blade dimensions robustly.
9316 crash Blade edges Entering an invalid ellipse axis ratios during edge design leads to crash.
9357 major Meridional contour Hub discontinuity inside blade region erroneously detected.
9352 major Finishing Outlet RSI connection faces for vaned stators are not cantained in Flowdomain Solid faces.
9318 major Finishing Turbine blades are not extended correctly at inlet during finishing.
9281 major Export Activating RSI Connections sometimes fails to create RSI geometry.
9360 minor Blade properties Bladeangles for Stator component not correctly initialized for inner spans.
9334 minor Export Simerics: Basic filename used for export should have no special character limitations.
9324 minor Blade profiles Context menu commands for graphical design curves can sometimes apply to the wrong curve.
9323 minor Meridional contour Context menu commands for graphical design curves can sometimes apply to the wrong curve.
9313 minor Export Export dialog: Missing information about automatic solid trimming during export.
9308 minor Export Wrong command for prism-layer creation in TCFD export.
9296 minor Blade edges Trimming on leading-/trailing edge option redundant for designs with 'tangential thickness' application.
9290 minor Help NACA4 coefficient is slightly incorrect.
9287 minor Main dimensions impeller Cordier-diagram marker sometimes placed incorrectly.
9285 minor Main dimensions impeller Alternative speed parameter is missing in Batch Mode dialog.
9284 minor Blade sweep Axial position parameter is missing in Batch Mode dialog.
9082 minor Export OpenFOAM: Sometimes impeller segments cannot be triangulated.
9346 tweak Batch mode Fix multiple cosmetic issues of the Batchmode dialog.
9312 tweak Import Geometry Missing user warning that the project will be closed, when opening the import dialog.
9294 tweak Global setup Clarify warning messages about specific speed.
9286 tweak Blade sweep The "Undo/Redo" command in Designstep-dialogs sometimes doesn't refresh the dialog completely.
9226 tweak General Clarify warning message about "Invalid Characters" in Export dialog.
9099 tweak Main dimensions impeller More information about estimated pressure differences for axial fans
About CFTurbo. CFTurbo is powerful, yet easy to use, pump design software that can help you design pumps from scratch or redesign existing impellers. Simply tell it the flow rate, head, RPM, and any (optional) pre-swirl and CFTurbo will automatically generate a pump design. You then have the option of going back and changing any details of the design with CFTurbo's guidance. This easy, but flexible, approach to pump design saves you time and still lets you get exactly the pump design you want.
About The Turbomachinery Design Company. CFturbo Software & Engineering GmbH is an engineering company offering CAE services and software development focusing on fluid dynamics/turbomachinery.
Our range of consultancy covers the whole turbomachinery development process - from consulting service, conceptual design and simulation up to construction, prototyping and measurement.
Product: CFTurbo
Version: 10.3.4.740
Supported Architectures: x64
Website Home Page : www.cfturbo.de
Language: english, german
System Requirements: PC
Supported Operating Systems: Windows 7even / 8.x / 10
Size: 75.1 mb
Please visit my blog
Added by 3% of the overall size of the archive of information for the restoration
No mirrors please
Added by 3% of the overall size of the archive of information for the restoration
No mirrors please