CAMWorks 2013 SP1
CAMWorks 2013 SP1 | 1.9 Gb
Geometric Limited, a leader in advanced manufacturing software a announces the new release of its intuitive solids-based CNC programming solution, CAMWorks.
Since its initial introduction in one of the foremost SolidWorks World events, CAMWorks, the first SolidWorks gold partner CAM system, has been delivering unmatched productivity to its users. Honoring its continued commitment to introduce the latest in programming technology to its users, CAMWorks 2013 has further simplified machining with multi-tasking machines through the introduction of Synchronous Machining Module (SMM), including intricate control on the sub-spindle operations. With an ear to users’ feedback, CAMWorks 2013 boasts of an enhanced user interface (UI) for easier access to improve productivity. The new simulation with life-like display and intricate controls has also garnered rave reviews.
CAMWorks 2013 has bolstered an already comprehensive Application Programming Interface (API) suite, with the addition of a wide variety of APIs including one that helps interpret Product and Manufacturing Information (PMI) data for our advanced users to automate significant portion of their design to manufacture life cycle reducing the drudgery of manual programming. This ability to automate has not only been harnessed for families of part but also for uniquely designed components like tailor-made devices for each patient in the medical industry.
CAMWorks combines with SolidWorks to bring the world of design and manufacturing a step closer. This has been possible due to the tight integration with SolidWorks that allows CAMWorks to store CAM data within the SolidWorks part file reducing file management and leveraging SolidWorks’ familiar interface to provide the users the best in class ease-of-use capabilities.
CW-36891 10-7467 Post The post questions in the sub spindle operations are not being posted.
CW-36811 10-7467 Post The Z co ordinates of a wrapped OD toolpath on a sub spindle feature are not posted correctly.
CW-36380 10-7411 Translation In Japanese TechDB, the names of the multi axis feature strategies are not translated and appear in English.
CW-36314 10-7413 UI The spin box controls for Auto save on general tab in Russian language are not found at correct locations.
CW-36311 10-7417 UI In the insert 2.5 axis feature wizard end condition dialog, both the radio buttons of taper in and taper out are selectable at the same time. The correct behavior is that only one of the radio button should get selected at any given point of time.
CW-36251 10-7369 WEDM In the CWEdmMachinesSetupx64.exe, the selection type for post files is set as *.edmpst and for cutting condition files, it is set as *.edmcc. The selection type should be *.pst for post files and *.ecc for cutting condition files.
CW-36097 10-7276 Post For the specific part, CAMWorks takes a lot of time to do post processing and sometimes locks up.
CW-35892 10-7150 Operation In Mill Turn module, when generate operation plan is done for hole features, then the drill tools selected are not as per the expressions defined in the TechDB.
CW-35881 10-7142 Toolpath In the specified part, the toolpath for contour mill operation is not generated for the defined irregular pocket feature.
CW-35791 10-7115 UI The display of chuck is not correct on turn part setups which have their Z axis direction reversed.
CW-35708 10-7058 Toolpath In the specified part, the groove rough toolpath is not generated correctly when the WIP options are set to “From Previous Leftover.”
CW-34811 Beta-198 TechDB The option of filter by end radius for hog nose tool does not work for Mill tool assemblies.
CW-34495 Beta-174 Assembly The user cannot select part sketches to define avoid areas for mill operations. Only assembly sketches can be selected.
CW-33549 10-6184 Toolpath In the specified part, the toolpath for turn finish operation is not generated completely.
CW-33083 10-6017 UI The circular edges present in a curve feature are displayed as straight edges.
CW-32030 10-5486 TechDB In case of dual monitor environment, some of the windows of TechDB are not displayed when the TechDB is opened in the primary monitor.
CW-28322 10-2916 Translation In German version of CAMWorks 2013 the label of the “Insert hole machining operation” is wrong.
CW-20074 2-0844 Features If an open profile feature is defined with a taper angle of less than 0.25 degrees, then the taper angle is not retained when the feature is edited.
CW-36811 10-7467 Post The Z co ordinates of a wrapped OD toolpath on a sub spindle feature are not posted correctly.
CW-36380 10-7411 Translation In Japanese TechDB, the names of the multi axis feature strategies are not translated and appear in English.
CW-36314 10-7413 UI The spin box controls for Auto save on general tab in Russian language are not found at correct locations.
CW-36311 10-7417 UI In the insert 2.5 axis feature wizard end condition dialog, both the radio buttons of taper in and taper out are selectable at the same time. The correct behavior is that only one of the radio button should get selected at any given point of time.
CW-36251 10-7369 WEDM In the CWEdmMachinesSetupx64.exe, the selection type for post files is set as *.edmpst and for cutting condition files, it is set as *.edmcc. The selection type should be *.pst for post files and *.ecc for cutting condition files.
CW-36097 10-7276 Post For the specific part, CAMWorks takes a lot of time to do post processing and sometimes locks up.
CW-35892 10-7150 Operation In Mill Turn module, when generate operation plan is done for hole features, then the drill tools selected are not as per the expressions defined in the TechDB.
CW-35881 10-7142 Toolpath In the specified part, the toolpath for contour mill operation is not generated for the defined irregular pocket feature.
CW-35791 10-7115 UI The display of chuck is not correct on turn part setups which have their Z axis direction reversed.
CW-35708 10-7058 Toolpath In the specified part, the groove rough toolpath is not generated correctly when the WIP options are set to “From Previous Leftover.”
CW-34811 Beta-198 TechDB The option of filter by end radius for hog nose tool does not work for Mill tool assemblies.
CW-34495 Beta-174 Assembly The user cannot select part sketches to define avoid areas for mill operations. Only assembly sketches can be selected.
CW-33549 10-6184 Toolpath In the specified part, the toolpath for turn finish operation is not generated completely.
CW-33083 10-6017 UI The circular edges present in a curve feature are displayed as straight edges.
CW-32030 10-5486 TechDB In case of dual monitor environment, some of the windows of TechDB are not displayed when the TechDB is opened in the primary monitor.
CW-28322 10-2916 Translation In German version of CAMWorks 2013 the label of the “Insert hole machining operation” is wrong.
CW-20074 2-0844 Features If an open profile feature is defined with a taper angle of less than 0.25 degrees, then the taper angle is not retained when the feature is edited.
About Geometric
Geometric is a specialist in the domain of engineering solutions, services and technologies. Its portfolio of Global Engineering services and Digital Technology solutions for Product Lifecycle Management (PLM) enables companies to formulate, implement, and execute global engineering and manufacturing strategies aimed at achieving greater efficiencies in the product realization lifecycle.
Headquartered in Mumbai, India, Geometric was incorporated in 1994 and is listed on the Bombay and National Stock Exchanges. The company recorded consolidated revenues of Rupees 8.08 billion (US Dollars 167.51 million) for the year ended March 2012. It employs over 4500 people across 12 global delivery locations in the US, France, Romania, India, and China. Geometric was assessed as CMMI 1.1 Level 5 for its software services and is ISO 9001:2008 certified for engineering operations. The company’s operations are also ISO 27001:2005 certified.
Geometric’s Geometry Technology Solutions (GTS) business unit develops cutting-edge point productivity solutions that enhance design and improve manufacturing operations. The end-user products from Geometric include CAMWorks, eDrawings Publisher, DFMPro, GeomCaliper, 3DPaintBrush, CAMWorksXpress and Glovius. The key technologies from Geometric are NestLib®, Feature Recognition (FR), GeomDiff and 3DSearchIT. Geometric licenses these technologies to OEM partners and also designs and implements customized process solutions using these technologies for industrial customers.
CAMWorks 2013 SP1
visit my blog
Name: Geometric Technologies CAMWorks
Version: 2013 SP1 (build 2013/0311)
Home: www.camworks.com
Interface: multilanguge
OS: Windows XP / Vista / Seven
System requirements: SolidWorks 2011-2013 (32bit or 64bit), MS Access 2003-2010 (32bit only!)
Size: 1.9 Gb
Special Thanks Team-SolidSQUAD
All parts on filepost.com, rapidgator.com, luckyshare.net interchanged. It is added by 5% of the overall size of the archive of information for the restoration
No mirrors please
No mirrors please