CAMWorks 2024 SP3

1. CWR-2181 CSR-26524 Toolpath For the specific Mill part imported from SOLIDWORKS CAM application to CAMWorks, when the 3 Axis Mill Toolpath generation method is set to Advanced, CAMWorks fails to machine all the areas of the Area Clearance and Z Level operations.
2. CW-129853 CSR-26565 CSR-26598 CSR-26717 CSR-26688 CSR-26535 System When loading the CAMWorks 2024 SP2 version as an add-in within the SOLIDWORKS application with default language setting as Japanese, the SOLIDWORKS application crashes without any error message getting displayed. This issue was not observed in CAMWorks 2024 SP1 Japanese language version.
3. CW-129728 CSR-26647 System In Contour Mill operations, for Bottom Finish, if stepover value is more than the tool diameter, the upon executing the Save Operation Plan command, the SOLIDWORKS application with CAMWorks loaded as an add-in crashes.
4. CW-128687 CSR-26275 Operation In the Posting tab of the Operation Parameters dialog box, the Rotation Angle field accepts values only in the range of-360 degrees to 360 degrees. Provision to accept angle values outside this range must be made available.
5. CW-128412 CSR-25721 API Provide an API to convert the Cut Off feature to a Face feature and to set Spindle attribute for Turn features.
6. CW-128411 CSR-25721 API APIs needed for providing the ability to add a Cut off operation at the end of machining, for inserting Turn Setups in the Operation tree and for reordering Turn Setups and operations.
7. CW-127996 CSR-26177 TechDB When adding new Imperial units (Inch) based tools in CAMWorks and saving it to the linked TechDB, incorrect values get fed into the TechDB due to rounding off values during their conversion from Imperial (Inch) to Metric units.
8. CW-127941 CSR-26177 System When the Send Feedback and Receive Alerts functionality are active in the CAMWorks, the performance gets affected significantly. CAMWorks takes more time to Open or Close the files when the above-mentioned functionalities are active.
9. CW-127911 CSR-26029 API Provide an API in Turn module to get the information of Turn Feature elements.
10. CW-127795 CSR-26101 System For the specific Mill part, changing the XY allowance to 0.003 Inches from 0.001 Inches crashes the CAMWorks application when it is loaded as an add-in within SOLIDWORKS
11. CW-127771 CSR-26081 Stock In CAMWorks 2022 and later versions, when the CAMWorks Coordinate system is defined and then an STL stock is selected, the stock alignment is incorrect.
12. CW-127595 CSR-26031 TechDB In CAMWorks, the Non-cutting high feedrate and Non-cutting high Z plunge feedrate values are incorrectly passed from the TechDB.
13. CW-127587 CSR-25437 Toolpath In Mill mode, for Contour Mill operations, when the CNC Compensation is ON and CNC Compensation is set to 'Tool center is on feature geometry', an unnecessary additional linear move gets added to Leadin move.
14. CW-127472 CSR-25993 TechDB In the Spanish language version of CAMWorks, some of the parameter strings in TechDB are incorrectly translated and need to be corrected.
15. CW-127471 CSR-25977 Toolpath For Contour Mill Operations with Toolpath Center set to “without compensation”, if entry point is used with no linear leadin, then it does not generate a single lead-in move. As a result, it fails to correctly compensate the toolpath on the machine.
16. CW-127467 CSR-25991 ShopFloor Up on installing the CAMWorks ShopFloor Publisher application downloaded from the CAMWorks Customer Portal, it is observed that it does not support the SOLIDWORKS 2023 and SOLIDWORKS 2024 versions. The ShopFloor Publisher app is not listed under the Add-in Manager dialog box of the SOLIDWORKS app.
17. CW-127223 CSR-25930 UIF In the Spanish language version of CAMWorks, some parameter strings in the Pattern tab of the Operation Parameters dialog box for Multiaxis operations are incorrectly translated. These strings need to be corrected.
18. CW-127183 CSR-25779 Setup Sheet For Operations machined using Dovetail tools, the Cutting Diameter, Flute Length, and Protrusion parameters are not output to the Setup Sheet.
19. CW-127062 CSR-25827 Feature For the specific Mill part, the largest inscribed circle diameter value is displayed incorrectly in the graphics area for a Circular Pocket with Island feature. This might result in incorrect tool selection if this parameter is used for the tool selection expression criteria.
20. CW-126958 CSR-25758 CSR-25809 Operation For the specific Assembly file, when the Stock Material is updated in the Stock Manager user interface, the newly selected material does not get updated for the operations.
21. CW-126944 CSR-25721 API Provide an API to Get/Set the Turret and Tool Crib for Mill, Turn, and Mill-Turn machines.
22. CW-126686 CSR-25623 Operation In CAMWorks, when inserting an operation interactively, if the Lock Spindle Speed control option is active, then the XY feedrate value gets displayed as 0.00 in the F/S tab. When the Lock Spindle Speed control option is inactive, the XY feedrate value gets displayed correctly.
23. CW-125455 CSR-25164 Toolpath When generating the toolpath for a Contour Mill operation on a Perimeter Open Pocket feature, unnecessary Leadin and Leadout moves are added to the toolpath.
24. CW-125299 CSR-25065 Toolpath For a Contour Mill operation, if the Entry method is set to Spiral under the Feature Options tab and Links between Cut depth is set to Stay down under the Leadin tab then, the toolpath generated is incorrect. The toolpath does not consider the Stay down option and moves to the Clearance Plane between cuts.
25. CW-124962 CSR-24819 API Provide an API to output "Minimum bar stock" parameter in Turn and Mill Turn mode.
26. CW-123344 CSR-24005 Toolpath When generating the 2.5 axis Roughing toolpath for an Open Pocket feature containing an island, CAMWorks ignores the island body. This is observed only when the Contain Area is defined by a sketch and the sketch coincides with the Island’s edge. Also, the applied XY clearance value in Advanced tab affects the toolpath.
27. CW-120316 CSR-22747 Help In the CAMWorks TechDB help file, there is no proper description available for the usage of parameter Spindle range in F/S tab under Turn Operations form.
28. CW-118267 CSR-22177 Operation For the specific Mill part, when editing the Pattern values in the hole feature, the Machining time is the same regardless of how many holes are drilled by changing the pattern.
29. CW-116261 CSR-20902 Toolpath For any Mill part, the Contour Mill toolpath generated for a slot feature is incorrect and gouges the part when CNC Compensation is ON and Limited look ahead check box option is checked. However, if the Limited look ahead check box option is unchecked, the toolpath gets generated correctly.
30. CW-109703 CSR-17148 Rebuild When opening the specific Mill part in CAMWorks 2021 SP2 version (Loaded as an Add-in within SOLIDWORKS), CAMWorks prompts for a Rebuild and upon executing the Rebuild command, CAMWorks crashes.