Altium NEXUS 3.0.10 build 100
Altium NEXUS 3.0.10 build 100 | 3.3 Gb
The Altium product team is pleased to announce the availability of NEXUS 3.0.10 (Update 1) build 100. This latest update continues to deliver new features and enhancements to the software's core technologies, while also addressing many issues raised by customers through the AltiumLive Community's BugCrunch system.
Schematic
36077 Resolved an issue where entering Note text that wrapped to multiple lines (via the modal dialog) would lock up the application, requiring the Task Manager to shut it down.
35887 Fixed regression that caused the inability to annotate with preassigned start indexes for designators when performing an Engineering Change Order.
35820 Fixed regression that caused designator values and default component prefixes to overlap, rather than display in separate positions, after using the Reset Schematic Designator command.
35923 Fixed issue that ignored values that were created as combined values within Sheet Symbol parameters.
36019 Fixed issue that caused software to crash upon the opening or creation of a schematic on 4K screens and higher
35565 Fixed issue that caused Port Cross References texts to not be properly positioned until clicked on.
35725 Fixed issue that caused parameter values to be transferred incorrectly following the execution of an Engineering Change Order (ECO).
34582 Fixed issue that caused net colors to be wrongfully assigned after Script execution with DDM (Dynamic Data Model) enabled.
35849 Fixed issue that caused incorrect Parameter values to be displayed on the compiled tab of the schematic for the not fitted part.
35823 Fixed issue that caused directly placing a No ERC object to a floating net label to be ignored, resulting in a Floating Net Label warning after compilation.
35880 Fixed issue that caused components set as mechanical to be checked for electrical properties and errors.
35202 Fixed issue that caused component movement to slow significantly within certain projects if the design enabled Cross Select mode and had a schematic document open.
35874 Fixed issue that caused an invalid dash size to appear within a PDF document when changing line style from 'dashed' to 'dotted' in a schematic document.
35857 Fixed issue that caused a rule inconsistency to occur between object properties displayed in a modal dialogs and properties panel modes.
34903 Fixed issue that caused a delay in Altium Designer and Altium NEXUS to occur when opening sheets in some large projects.
35825 Fixed an issue with "Duplicate Net Names" ERC check.
Platform
35916 Fixed issue that caused the expression 'If Nil = ObjectVariable' to cease functioning within the scripting system.
36009 Fixed issue that caused problems opening generic documents when new Documentation Outputs for Schematic Prints and PCB print was created.
35840 Fixed issue that caused invalid violations when loading and transferring alternate parts from the managed content server.
35737 Fixed issue that caused ECO to not transfer nets for alternate parts when the pin designator was different from the original part pins.
34664 Added ability to still use Altium NEXUS in Viewer mode, when signed in to AltiumLive account, but not using an active license. Features permitted to be used are the same as when using an Altium NEXUS Viewer license. (BC:1027)
PCB
35819 Fixed regression where Tented checkboxes were unavailable for enabling in the Properties panel for Via Stitching and Via Shielding (BC:12491).
35753 Fixed regression that caused polygons to not appear in the Polygon manager after creating a new one using the Board Outline tool.
35864 Fixed regression that caused extra, unnecessary words to appear within the Polygon Manager rules expression within the Polygon Pour Manager.
Other
35855 PDNA: Fixed previously broken possibility to edit pins in PDN Analyzer
36012 LSM: Fixed regression that caused Altium Designer to stop working in Windows 7 when opening the Layer Stack Manager for the first time in a specific PCB document.
35822 Importers/Exporters: Fixed regression that caused Schematic sheet to not import when attached Eagle libraries have been imported.
35362 Importers/Exporters: Fixed an issue where PCAD Import does not extract components.
35915 Properties Panel: Fixed issue that caused the Propagation delay of an Accordion object to be incorrectly displayed as "0" in the Properties panel.
36077 Resolved an issue where entering Note text that wrapped to multiple lines (via the modal dialog) would lock up the application, requiring the Task Manager to shut it down.
35887 Fixed regression that caused the inability to annotate with preassigned start indexes for designators when performing an Engineering Change Order.
35820 Fixed regression that caused designator values and default component prefixes to overlap, rather than display in separate positions, after using the Reset Schematic Designator command.
35923 Fixed issue that ignored values that were created as combined values within Sheet Symbol parameters.
36019 Fixed issue that caused software to crash upon the opening or creation of a schematic on 4K screens and higher
35565 Fixed issue that caused Port Cross References texts to not be properly positioned until clicked on.
35725 Fixed issue that caused parameter values to be transferred incorrectly following the execution of an Engineering Change Order (ECO).
34582 Fixed issue that caused net colors to be wrongfully assigned after Script execution with DDM (Dynamic Data Model) enabled.
35849 Fixed issue that caused incorrect Parameter values to be displayed on the compiled tab of the schematic for the not fitted part.
35823 Fixed issue that caused directly placing a No ERC object to a floating net label to be ignored, resulting in a Floating Net Label warning after compilation.
35880 Fixed issue that caused components set as mechanical to be checked for electrical properties and errors.
35202 Fixed issue that caused component movement to slow significantly within certain projects if the design enabled Cross Select mode and had a schematic document open.
35874 Fixed issue that caused an invalid dash size to appear within a PDF document when changing line style from 'dashed' to 'dotted' in a schematic document.
35857 Fixed issue that caused a rule inconsistency to occur between object properties displayed in a modal dialogs and properties panel modes.
34903 Fixed issue that caused a delay in Altium Designer and Altium NEXUS to occur when opening sheets in some large projects.
35825 Fixed an issue with "Duplicate Net Names" ERC check.
Platform
35916 Fixed issue that caused the expression 'If Nil = ObjectVariable' to cease functioning within the scripting system.
36009 Fixed issue that caused problems opening generic documents when new Documentation Outputs for Schematic Prints and PCB print was created.
35840 Fixed issue that caused invalid violations when loading and transferring alternate parts from the managed content server.
35737 Fixed issue that caused ECO to not transfer nets for alternate parts when the pin designator was different from the original part pins.
34664 Added ability to still use Altium NEXUS in Viewer mode, when signed in to AltiumLive account, but not using an active license. Features permitted to be used are the same as when using an Altium NEXUS Viewer license. (BC:1027)
PCB
35819 Fixed regression where Tented checkboxes were unavailable for enabling in the Properties panel for Via Stitching and Via Shielding (BC:12491).
35753 Fixed regression that caused polygons to not appear in the Polygon manager after creating a new one using the Board Outline tool.
35864 Fixed regression that caused extra, unnecessary words to appear within the Polygon Manager rules expression within the Polygon Pour Manager.
Other
35855 PDNA: Fixed previously broken possibility to edit pins in PDN Analyzer
36012 LSM: Fixed regression that caused Altium Designer to stop working in Windows 7 when opening the Layer Stack Manager for the first time in a specific PCB document.
35822 Importers/Exporters: Fixed regression that caused Schematic sheet to not import when attached Eagle libraries have been imported.
35362 Importers/Exporters: Fixed an issue where PCAD Import does not extract components.
35915 Properties Panel: Fixed issue that caused the Propagation delay of an Accordion object to be incorrectly displayed as "0" in the Properties panel.
Altium NEXUS is an easy to implement, team-based PCB workflow solution designed to provide the transparency needed for engineering teams to collaborate with confidence. Even though Altium NEXUS includes all the various industry leading PCB domain editors required to create a circuit board, its core DNA is enabling design teams to work together.
Design collaboration is enabled through user roles and managed data (library and design), while providing process automation and a framework to configure common electronic design activities and workflows. This provides organizational transparency to design data changes and workflow states through role based notification. By using Altium NEXUS, companies will have the ability to manage their PCB data, improve communication as it relates to multidisciplinary engineering, and configure and automate workflows replacing existing manual processes - resulting in the reduction of design respins and delivery of higher quality products in a shorter period of time.
Altium NEXUS introduces new technology in PCB data management, design collaboration, and process and workflow control, making it the most comprehensive circuit board design solution, while taking the risk out of integration and deployment. Altium NEXUS includes server technology to support collaboration, process management, and data management, hosted either on-premise (same as Altium Vault), or cloud (option not available previously) environments. The core schematic and PCB design technology of Altium NEXUS is identical to that of Altium Designer 18.0, sharing 100% of the design capabilities - now and always.
In 2009, Altium embarked upon an ambitious plan to transition the design work to the manufacturing process seamlessly through a consistent workflow with real-time component information. They recognized that this process had to be repeatable, accountable, and traceable. Released in 2011, it became known as “The Vault.”
With changes to the name, the functionality, and the various offerings over the years, it’s been difficult to understand what exactly is NEXUS or Concord Pro. Is it a library database? Is it a repository? Is it a version control system? In short – it’s all of them.
Altium LLC. is a multinational software corporation headquartered in San Diego, California, that focuses on electronics design systems for 3D PCB design and embedded system development. Altium products are found everywhere from world leading electronic design teams to the grassroots electronic design community. Founded in 1985, Altium has offices worldwide, with US locations in San Diego, Boston and New York City, European locations in Karlsruhe, Amersfoort, Kiev, Munich, Markelo and Zug, and Asia Pacific locations in Shanghai, Tokyo and Sydney.
Product: Altium Nexus
Version: 3.0.10 (Update 1) build 100
Supported Architectures: x64
Website Home Page : www.altium.com
Language: english
System Requirements: PC *
Supported Operating Systems: *
Size: 3.3 Gb
Below are the recommended system requirements to install and run Altium NEXUS.
Recommended System Requirements
- Windows 7 SP1 (64-bit only), Windows 8 (64-bit only), or Windows 10 (64-bit only) Intel Core i7 processor or equivalent
- 16GB RAM
- 10GB hard disk space (Install + User Files)
- SSD
- High performance graphics card (supporting DirectX 10 or better), such as GeForce GTX 1060/Radeon RX 470
- Dual monitors with 2560x1440 (or better) screen resolution
- 3D mouse for 3D PCB design, such as the Space Navigator
- Adobe Reader (version XI or later for 3D PDF viewing)
- Internet Connection
- Up to date Web browser
- Microsoft Office 32-bit or 64-bit (Microsoft Excel required for BOM, Microsoft Access required for DbLibs). 64-bit Microsoft Access Database Engine 2010 (required for DbLibs) - this is included in Microsoft Office 64-bit, but not included in Microsoft Office 32-bit).
Recommended System Requirements
- Windows 7 SP1 (64-bit only), Windows 8 (64-bit only), or Windows 10 (64-bit only) Intel Core i7 processor or equivalent
- 16GB RAM
- 10GB hard disk space (Install + User Files)
- SSD
- High performance graphics card (supporting DirectX 10 or better), such as GeForce GTX 1060/Radeon RX 470
- Dual monitors with 2560x1440 (or better) screen resolution
- 3D mouse for 3D PCB design, such as the Space Navigator
- Adobe Reader (version XI or later for 3D PDF viewing)
- Internet Connection
- Up to date Web browser
- Microsoft Office 32-bit or 64-bit (Microsoft Excel required for BOM, Microsoft Access required for DbLibs). 64-bit Microsoft Access Database Engine 2010 (required for DbLibs) - this is included in Microsoft Office 64-bit, but not included in Microsoft Office 32-bit).
Please visit my blog
Added by 3% of the overall size of the archive of information for the restoration
No mirrors please
![Altium NEXUS 3.0.10 build 100]()
Added by 3% of the overall size of the archive of information for the restoration
No mirrors please
Altium NEXUS 3.0.10 build 100
