Microstation - Learn 2D And 3D Cad Design

learn to design CAD using the Bentley Microstation Connect - V8

What you'll learn
Microstation commands
Plan drawing using levels
Dimmensions and printing layouts
Real work with an architectural design
Unique course. Designed exactly with the commands and excercises of the best seller AutoCAD course.
Requirements
the course is from cero
Description
In this course, we will learn the basics of Microstation. Starting with lectures, we will go through 27 lectures in order to completely understand all the basics. Once lectures are completed, 15 exercises will be completed one by one that will lead to the final project. The project is for student to complete in all respects; however, 10 lectures are added after exercise in case student wants to complete the project with aid of these lectures.#AulaGEOLesson 1 - IntroductionIn this lesson, we will have a short introduction of software “Microstation” by getting a little know how about this software, its capabilities and over all usage.Lesson 2 - InterfaceIn this session, we will see the basic interface of Microstation, learning some basic points to hit in case we need to perform specific functions and access different commands.Lesson 3 – Keyboard shortcutsIn this session, we will learn some hot keys commonly used in Microstaiton. The purpose of showing these keys in start of course is to make students aware of these keys so that they could use through out the course and learn well.Lesson 4 – Common ToolbarIn this session, we will learn about the very basic and common tool bar of Microstation as it is necessary to understand before we could proceed to next list of toolbars.Lesson 5 – Q ToolsIn this session, we will learn different tools and commands available in category of “Q” as these can be accessed with keyboard shortcut of “Q” respectively.Lesson 6 – W ToolsIn this session, we will learn different tools and commands available in category of “W” as these can be accessed with keyboard shortcut of “W” respectively.Lesson 7 – E ToolsIn this session, we will learn different tools and commands available in category of “E” as these can be accessed with keyboard shortcut of “E” respectively.Lesson 8 – R ToolsIn this session, we will learn different tools and commands available in category of “R” as these can be accessed with keyboard shortcut of “R” respectively.Lesson 9 – T ToolsIn this session, we will learn different tools and commands available in category of “T” as these can be accessed with keyboard shortcut of “T” respectively.Lesson 10 – A ToolsIn this session, we will learn different tools and commands available in category of “A” as these can be accessed with keyboard shortcut of “A” respectively.Lesson 11 – S ToolsIn this session, we will learn different tools and commands available in category of “S” as these can be accessed with keyboard shortcut of “S” respectively.Lesson 12 – D ToolsIn this session, we will learn different tools and commands available in category of “D” as these can be accessed with keyboard shortcut of “D” respectively.Lesson 13 – F ToolsIn this session, we will learn different tools and commands available in category of “F” as these can be accessed with keyboard shortcut of “F” respectively.Lesson 14 – Editing ToolsIn this session, we will how to edit and modify the geometries or primitives drawn using tools and commands learnt in previous sessions.Lesson 15 – Level ManagerIn this session, we will learn how to add, remove and apply different levels using level manager. It is sometimes referred as layers too.Lesson 16 – ArrayIn this session, we will learn how to create different types of arrays in Microstation like linear, polar or rectangular.Lesson 17 – Move ParallelIn this session, we will learn how to offset a specific line, arc or a complete element. We can simply move a specific element or even copy at certain distance from reference pointLesson 18 – DimensionsIn this session, we will learn how to dimension different lines, arcs and ultimately give specific style dimension to entire element.Lesson 19 – Snap ToolbarIn this session, we will learn how to use snap toolbar as there are different very important snaps which can be used to create accurate geometries in no time like mid point snap, intersect snap and bisector etc.Lesson 20 – DWG ConversionIn this session, we will learn how to convert Autodesk AutoCAD file to Microstation format.Lesson 21 – PDF ConversionIn this session, we will learn how to convert Adobe PDF file to Microstation format.Lesson 22 – Excel ConversionIn this session, we will learn how to convert Microsoft Excel sheet to Microstation format and link it for future changes.Lesson 23 – New ModelIn this session, we will learn how to create a new model.Lesson 24 – New SheetIn this session, we will learn how to create a new sheet.Lesson 25 – Title BlockIn this session, we will learn how to create a title block.Lesson 26 – PlotIn this session, we will learn how to print or plot a specific sheet and understand the basics of pen table.Lesson 27 – HatchIn this session, we will learn how to use hatch command in detailExercise 1 – Cooking RangeIn this exercise, we will create a 2D top view of cooking range.Exercise 2 – Kitchen ShelfIn this exercise, we will create a 2D top view kitchen shelf.Exercise 3 – Cupboard ViewsIn this exercise, we will create 2D top view and front view of cupboards.Exercise 4 – Kitchen AppliancesIn this exercise, we will view and access collection of kitchen appliances.Exercise 5 – Dining TableIn this exercise, we will create a 2D top view of dining table.Exercise 6 – Sofa Chair SetIn this exercise, we will create a 2D top view of sofa chair set.Exercise 7 – Auxiliary FurnitureIn this exercise, we will view and access collection of auxiliary furniture.Exercise 8 – BedIn this exercise, we will create a 2D top view of bed.Exercise 9 – Beds CollectionIn this exercise, we will view and access collection of beds.Exercise 10 – BathtubIn this exercise, we will create a 2D top view of bathtub.Exercise 11 – Washroom WCIn this exercise, we will create a 2D top view of washroom WC.Exercise 12 – Washroom AccessoriesIn this exercise, we will view and access collection of washroom accessories.Exercise 13 – CarsIn this exercise, we will view and access collection of cars.Exercise 14 – DIY ProjectIn this exercise, we will view a 2D layout with different areas and furniture. Students must recreate this project in order to fully implement all the tools and commands learnt throughout the course. In case students cannot create it correctly, they can follow additional 10 lectures at end of this course to follow the creation of this project step-by-step.Exercise 15 – Introduction to 3DIn this exercise, we will have an overview of three-dimensional primitives.Additional Lecture 1 to Lecture 10In these ten lectures, we will see step-by-step method to create the DIY project, i.e. 2D floor plan.3D Modeling.This is a new module added, which includes the 3D modeling tools using a house as example from the 2D lines to rendering.3D modeling - 3D house projecdtLecture 54: IntroductionLecture 55: User Interface and NavigationLecture 56: Keyboard ShortcutsLecture 57: Base with Wall Creation & Learn Extrude CommandLecture 58: Window Space 1 & Learn Copy,Move,Snap CommandLecture 59: Window Space 2 & Learn Subtract CommandLecture 60: Door Space 2 & Learn Union CommandLecture 61: Widow Creation/ Placement & Learn Rotate CommandLecture 62: Exhaust Creation/ Placement & Learn Path Array CommandLecture 63: Door Creation & Learn Cut Solid by Curve CommandLecture 64: Door Placement & Learn Scale CommandLecture 65: Rooftop Creation & Learn Sweep CommandLecture 66: Entrance Base Creation & Learn to manipulate coordinatesLecture 67: Pillar Creation & Learn Polar Rotated ArrayLecture 68: Importing Models via 3D Warehouse & Other FormatsLecture 69: Boundary Wall and Floor CreationLecture 70: Presentation ModesLecture 71: Apply Material to ModelLecture 72: Light Manager and Render Model

Overview

Section 1: PHASE - 1 The tools and commands

Lecture 1 Introduction

Lecture 2 Interface

Lecture 3 Keyboard Shortcuts

Lecture 4 Common Tool Bar

Lecture 5 Q - Tools

Lecture 6 W - Tools

Lecture 7 E - Tools

Lecture 8 R - Tools

Lecture 9 T - Tools

Lecture 10 A - Tools

Lecture 11 S - Tools

Lecture 12 D - Tools

Lecture 13 F - Tools

Lecture 14 Editing Tools

Lecture 15 Level Manager

Lecture 16 Array

Lecture 17 Move Parallel

Lecture 18 Dimensions

Lecture 19 Snap Tool Bar

Lecture 20 DWG to DGN

Lecture 21 PDF to DGN

Lecture 22 EXCEL to DGN

Lecture 23 New Model

Lecture 24 New Sheet

Lecture 25 Title Block

Lecture 26 Plot

Lecture 27 Hatch

Section 2: PHASE - 2 Excercises

Lecture 28 Cooking Range

Lecture 29 Kitchen Shelf

Lecture 30 Cupboard Views

Lecture 31 Kitchen Appliances

Lecture 32 Dining Table

Lecture 33 Sofa Chair Set

Lecture 34 Auxiliary Furniture

Lecture 35 Bed

Lecture 36 Beds

Lecture 37 Bath Tub

Lecture 38 Washroom WC

Lecture 39 Washroom Accessories

Lecture 40 Cars

Lecture 41 DIY Project

Lecture 42 Slight Introduction of 3D

Section 3: PHASE - 3 House project

Lecture 43 Create Cells

Lecture 44 Reference Lines

Lecture 45 Walls

Lecture 46 Doors

Lecture 47 Windows

Lecture 48 Boundary Walls

Lecture 49 Cell Placement

Lecture 50 Space Naming

Lecture 51 Hatching

Lecture 52 Dimensions

Lecture 53 Bulk export from microstation dgn files to dxf or dwg

Section 4: Introduction to 3D Modeling - Mechanical piece

Lecture 54 Introduction

Lecture 55 User Interface and Navigation

Lecture 56 Keyboard Shortcuts

Lecture 57 Design File

Lecture 58 Primitive Solids (E Tools)

Lecture 59 Element Handles, Draw on Solid & Modify Tools

Lecture 60 Solid By Extrusion (R Tool)

Lecture 61 Solid By Revolution (R Tool)

Lecture 62 Solid By Extrusion Along (R Tool)

Lecture 63 Solid By Thicken Surface (R Tool)

Lecture 64 Linear Solid (R Tool)

Lecture 65 Boolean Tools - Unite | Intersect | Subtract

Lecture 66 Trim Solids

Lecture 67 Cut Solids by Curves

Lecture 68 Chamfer and Fillets

Lecture 69 Mechanical Model - Sprocket

Lecture 70 3D to 2D Conversion

Lecture 71 2D Views Sheet from 3D Model

Lecture 72 Section Views - Volume Clipping

Section 5: 3D modeling - 3D house project

Lecture 73 Introduction

Lecture 74 User Interface and Navigation

Lecture 75 Keyboard Shortcuts

Lecture 76 Base with Wall Creation & Learn Extrude Command

Lecture 77 Window Space 1 & Learn Copy,Move,Snap Command

Lecture 78 Window Space 2 & Learn Subtract Command

Lecture 79 Door Space 2 & Learn Union Command

Lecture 80 Widow Creation/ Placement & Learn Rotate Command

Lecture 81 Exhaust Creation/ Placement & Learn Path Array Command

Lecture 82 Door Creation & Learn Cut Solid by Curve Command

Lecture 83 Door Placement & Learn Scale Command

Lecture 84 Rooftop Creation & Learn Sweep Command

Lecture 85 Entrance Base Creation & Learn to manipulate coordinates

Lecture 86 Pillar Creation & Learn Polar Rotated Array

Lecture 87 Importing Models via 3D Warehouse & Other Formats

Lecture 88 Boundary Wall and Floor Creation

Lecture 89 Presentation Modes

Lecture 90 Apply Material to Model

Lecture 91 Light Manager and Render Model

Section 6: Bonus lessons

Lecture 92 Cell edition

Lecture 93 Editing tools question

Section 7: Terrains using Microstation - bonus section

Lecture 94 Terrain - xml file import

Lecture 95 Terrain - element information

Lecture 96 Terrain - display and adjustment

Lecture 97 Terrain - contour labeling

Lecture 98 Terrain - contours spots

Section 8: Working with isometric designs - bonus lesson

Lecture 99 Isometric - 3d model with respective 2D views

Lecture 100 Isometric - dimensioning isometric views

Lecture 101 Isometric - export each 2D view to different file

Lecture 102 Isometric - views to new sheet layouts

engineers, architects and students,bim modelers,draft enthusiasts,autocad students wishing to understand microstation,bentley systems users